Modern technology requires a multitude of precise parts that are a necessity in reliable methods of surface finishing. Energy of detonable gas mixture combustion has been used in manufacturing as a processing source for a long time. One of the most underappreciated methods is thermal deburring; this is caused by certain difficulties in modelling and simulation of this process due to a complex and poorly predictable nature of the combustion. A theoretical approach towards thermal deburring process using the conception of an equivalent chamber is described. Processing of combined experimental and computational data results in a simplified model of thermal deburring in the case with deflagration and combustion with a shock waves formation. The proposed mathematical model was verified by an experimental investigation of the combustion in a shock tube, the difference of compared parameters did not exceed 3%. The heat fluxes at thermal deburring by combustible gas mixtures and their distribution on part surfaces according to the direction of the shock waves propagation were calculated. A relation between the value of the heat flux and shock waves propagation was found with a convincing repeating trend.
In this article, the main causes of vibration in the thrust bearing of hydrogenerator motors rated 320 MW are considered. The main types of internal and surface defects that appear on the working surface of the thrust bearing disc during long-term operation are considered. A method of three-dimensional modeling of such defects is presented, and an assessment of the stress-strain state of the heel disc is proposed, taking into account the main forces acting on the working surface using the finite element method. An analysis of the possible further operation of discs with similar defects, in accordance with the technical requirements, is carried out, and we consider ways to eliminate them.