Trevor Hyde

Dr. Trevor Hyde


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 March 2023 in Energies
Verified
Journal Article
Open access
PDF file
MGMohammad Ghoraishi
Mohammad Ghoraishi
THTrevor Hyde
Trevor Hyde
AZAggelos Zacharopoulos
Aggelos Zacharopoulos
Jayanta Deb MondolJayanta Deb Mondol
Jayanta Deb Mondol
APAdrian Pugsley
Adrian Pugsley
An experiment was conducted to test the optical efficiency of the lenses of the Concentrating Photovoltaic Glazing (CoPVG) concept. The CoPVG is a seasonal glazing system consisting of longitudinal prismatic lenses. The lenses concentrate sunlight onto the focus where Photovoltaic (PV) cells are bonded, generating electricity while simultaneously preventing excessive glare indoors during summer. The system transmits sunlight for daylight purposes in winter. The experimental results were compared with an analytical model developed at Ulster University. Although there were discrepancies between the model and the experimental results, the model can still predict the optical performance of the lenses reliably, and can therefore still provide an overview of the concept’s optical performance. The model was then used to create a visual representation of the glazing’s annual optical performance, demonstrating how the glazing responds to changes in the sun’s position in the sky throughout the year. This analysis allows for balancing the need for natural lighting and energy generation, and so enables designers to evaluate annual optical performance of the CoPVG lens quickly and accurately. A case study of a building in Belfast is presented to demonstrate the application of the model. As an example, the results indicate that utilizing the lenses in glazing towards the south leads to a shift in its performance from room lighting to shading on 1st April, and vice versa on 15 September. The analyses also show that utilizing the CoPVG lenses can potentially enhance the electrical output power of the glazing ranging between 5% and 8% and from 46% up to 52% during winter and summer, respectively, compared with traditional Semi-Transparent Photovoltaic (STPV) glazing with the same opaque area percentage.

1 January 2009
Verified
Conference Paper
Closed access
PDF file
YFYueping Fang
Yueping Fang
THTrevor Hyde
Trevor Hyde
NHNeil James Hewitt
Neil James Hewitt
The simulated triple vacuum glazing consists of three, 4 mm thick glass panes with two vacuum gaps with each internal glass surface coated with a low emittance coating. The two vacuum gaps are sealed by an indium based sealant and separated by a stainless steel pillar array with a height of 0.12 mm and a pillar diameter of 0.3 mm spaced at 25 mm. Both solder glass and indium based sealants have been successfully applied in vacuum glazing previously. The thermal performance of the triple vacuum glazing was simulated using a finite volume model. The simulation results show that although the thermal conductivity of solder glass (1 W.m−1.K−1) and indium (83.7 W.m−1.K−1) are very different, the increase in heat transmission of triple vacuum glazing with a 10mm frame rebate resulting from the use of an indium edge seal compared to a solder glass edge seal was 0.48%. Increasing both edge seal widths from 3 mm to 10 mm led to a 24.7% increase in heat transmission of the triple vacuum glazing without a frame and an 18.3% increase for a glazing with a 10 mm frame rebate depth. Increasing the rebate depth in a solid wood frame from 0 to 15 mm decreased the heat transmission of the triple vacuum glazing by 32.9%. The heat transmission of a simulated 0.5 m by 0.5 m triple vacuum glazing was 32.2% greater than that of 1 m by 1 m triple vacuum glazing.