Low carbon technologies are necessary to address global warming issues through electricity decabonisation, but their large-scale integration challenges the stability and security of electricity supply. Energy storage can support this transition by bringing flexibility to the grid but since it represents high capital investments, the right choices must be made in terms of the technology and the location point in the network. Most of the potential for storage is achieved when connected further from the load, and Battery Energy Storage Systems (BESS) are a strong candidate for behind-the-meter integration. This work reviews and evaluates the state-of-the-art development of BESS, analysing the benefits and barriers to a wider range of applications in the domestic sector. Existing modelling tools that are key for a better assessment of the impacts of BESS to the grid are also reviewed. It is shown that the technology exists and has potential for including Electric Vehicle battery reuse, however it is still mostly applied to optimise domestic photovoltaic electricity utilisation. The barriers to a wider integration are financial, economic, technical, as well as market and regulation. Increased field trials and robust numerical modelling should be the next step to gain investment confidence and allow BESS to reach their potential.
An experiment was conducted to test the optical efficiency of the lenses of the Concentrating Photovoltaic Glazing (CoPVG) concept. The CoPVG is a seasonal glazing system consisting of longitudinal prismatic lenses. The lenses concentrate sunlight onto the focus where Photovoltaic (PV) cells are bonded, generating electricity while simultaneously preventing excessive glare indoors during summer. The system transmits sunlight for daylight purposes in winter. The experimental results were compared with an analytical model developed at Ulster University. Although there were discrepancies between the model and the experimental results, the model can still predict the optical performance of the lenses reliably, and can therefore still provide an overview of the concept’s optical performance. The model was then used to create a visual representation of the glazing’s annual optical performance, demonstrating how the glazing responds to changes in the sun’s position in the sky throughout the year. This analysis allows for balancing the need for natural lighting and energy generation, and so enables designers to evaluate annual optical performance of the CoPVG lens quickly and accurately. A case study of a building in Belfast is presented to demonstrate the application of the model. As an example, the results indicate that utilizing the lenses in glazing towards the south leads to a shift in its performance from room lighting to shading on 1st April, and vice versa on 15 September. The analyses also show that utilizing the CoPVG lenses can potentially enhance the electrical output power of the glazing ranging between 5% and 8% and from 46% up to 52% during winter and summer, respectively, compared with traditional Semi-Transparent Photovoltaic (STPV) glazing with the same opaque area percentage.