Nickel-molybdenum hydrocracking catalysts based on amorphous silica-aluminas (ASAs) with Si/Al = 0.3–1.5 have been prepared using chemicals and methods available for catalyst plants. The acidic...
Specific features of the catalytic tar cracking in the presence of formic acid, BEA zeolite and 8% Ni-2.5% Mo/Sibunit catalyst were studied at 350 °C and 1.0 MPa pressure. The obtained results evidenced that formic acid can be used as a hydrogen donor during catalytic reactions. The formic acid addition made it possible to perform efficient hydrocracking of heavy feed such as tar. It was found that both the tar conversion and selectivity to light (gasoline-diesel) fractions grew in the sequence: tar < (tar - formic acid) < (tar - formic acid - BEA zeolite) < (tar - formic acid - BEA zeolite - 8% Ni-2.5% Mo/Sibunit catalyst). Furthermore, significantly lower concentrations of impurities containing sulfur and nitrogen were observed for the (tar - formic acid - BEA zeolite - 8% Ni-2.5% Mo/Sibunit catalyst) system. For example, the sulfur and nitrogen concentrations in the tar precursor were 1.50% and 0.86%, respectively. Meanwhile, their concentrations in the liquid products after the catalytic cracking were 0.73% and 0.18%, respectively.
The effect of the W: (W + Mo) atomic ratio in NiMoW trimetallic catalysts on their catalytic and physicochemical properties is studied. The catalysts are prepared by impregnating a carrier containing...
The conversion of oil shale (OS) in a hydrogen medium at a pressure of 6.0 MPa and a temperature of 400°C with the subsequent refining of the resulting products in the presence of NiMo sulfide catalysts supported on materials exhibiting different acidities has been studied. It has been found that the use of the catalysts leads to a significant decrease in the content of sulfur, nitrogen, aromatic hydrocarbons, and olefins in the liquid products obtained from the shale. It has been shown that the catalytic refining of OS hydroconversion products makes the fractional composition of synthetic oil lighter and increases the H/C ratio. The use of the catalysts leads to a decrease in the synthetic oil yield owing to the formation of hydrocarbon gas and coke deposits on the catalysts; in this case, the synthetic oil yield varies in the following order: catalyst-free (25.7 wt %) > NiMo/ASA–Al2O3 (22.0 wt %) > NiMo/Al2O3 (20.7 wt %) > NiMo/USY–Al2O3 (15.8 wt %).
Ni-Mo bimetallic catalysts are prepared by impregnating a carrier containing amorphous aluminosilicate (AAS) and aluminum oxide using a solution with Ni, Mo, and citric acid. The temperature of the...
A method for vacuum gas oil hydrocracking using a three-layered package of catalysts is proposed, in which the top layer is NiMo/Al2O3, the middle is NiM/AAS-Al2O3 and the bottom is NiM/Y-Al2O3,...