Camilo Alexander Leon Sanchez

Mr. Camilo Alexander Leon Sanchez

orcid

Research Focus & Metrics

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
CBCarolin Bachert
Carolin Bachert
CSCamilo Alexander Leon Sanchez
Camilo Alexander Leon Sanchez
TKTatjana Kutzner
Tatjana Kutzner
GAGiorgio Agugiaro
Giorgio Agugiaro
With the increasing adoption of semantic 3D city models, the relevance of applications in the field of Urban Building Energy Modelling (UBEM) has rapidly grown, as the building sector accounts for a large part of the total energy consumption. UBEM allows us to better understand the energy performance of the building stock and can contribute to defining refurbishment strategies. However, UBEM applications require lots of heterogeneous data, eventually advocating for standards for data interoperability. The Energy Application Domain Extension has been created to cope with UBEM data requirements and offers a standardised data model that builds upon the CityGML standard. The Energy ADE 1.0, released in 2018, creates new classes and adds new properties to existing classes of the CityGML 2.0 Core and Building modules. CityGML 3.0, released in 2021, has introduced several changes to the data model and its ADE mechanism. These changes render the Energy ADE incompatible with CityGML 3.0. This article presents how the Energy ADE has been ported to CityGML 3.0 to allow, on the one hand, for a lossless data conversion and, on the other hand, to exploit the new characteristics of CityGML 3.0 while keeping a logical symmetry between the ADE classes of both CityGML versions. The article describes the chosen methodology, the mapping strategies, the implementation steps, as well as the data conversion tests to check the validity of the “new” Energy ADE for CityGML 3.0.

18 May 2022 in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Verified
Journal Article
Open access
PDF file
DGD. Giannelli
D. Giannelli
CSCamilo Alexander Leon Sanchez
Camilo Alexander Leon Sanchez
GAGiorgio Agugiaro
Giorgio Agugiaro
In this paper, five commonly used software tools to estimate solar radiation in the urban context (GRASS GIS, ArcGIS, SimStadt, CitySim and Ladybug) are run on the same test site and are compared in terms of input data requirements, usability, and accuracy of the results. Spatial and weather data have been collected for an area located in the Brazilian city of São Paulo, in the district of Santana. The test area surrounds a weather station, for which meteorological data of the last 15 years have been collected and used as ground truth when analysing and comparing the simulation results. In terms of spatial data, raster- and vector-based models of the study area have been generated in order to comply with the different input requirements. More specifically, in the case of the vector-based tools (SimStadt, CitySim and Ladybug), a common 3D model based on CityGML and containing buildings, vegetation (trees) and terrain has been generated and used as a common urban model. The paper presents the findings and discusses the results not only from a numerical point of view, but also from the perspective of the overall usability of the software in terms of data requirements, simulation time and task automatisation.

14 October 2022 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Verified
Journal Article
Open access
PDF file
ÖTÖ. Tufan
Ö. Tufan
KOKen Arroyo Ohori
Ken Arroyo Ohori
CSCamilo Alexander Leon Sanchez
Camilo Alexander Leon Sanchez
GAGiorgio Agugiaro
Giorgio Agugiaro
JSJ. Stoter
J. Stoter
3D city models are frequently used to acquire and store energy-related information of buildings for energy applications. In this context, CityGML is the most common data model, and the Energy ADE, one of its most complex extensions, provides a systematic way of storing detailed energy-related data in XML format. Contrarily, even though CityGML’s JSON-based encoding, CityJSON, has an extension mechanism, an energy-related CityJSON Extension is missing. This paper, therefore, presents the first results of the development of a CityJSON Energy Extension and space heating demand calculation is utilized as the use case. The simplified version of the Energy ADE, called the Energy ADE KIT profile, is used to create a semi-direct translation to the CityJSON Energy Extension. This Extension is then validated through the official validator of CityJSON and the use case, and improvements are made considering the validation results. The space heating demand is calculated according to the Dutch standard NTA 8800 for a subset of Rijssen-Holten in the Netherlands although the solar gains calculation requires further review. The results show that the final CityJSON Energy Extension provides full support for space heating demand calculations based on the NTA 8800 and eliminates the deep hierarchical structure of the Energy ADE. A comparison on CityJSON file sizes shows a 25.2 MB increase after the required input data is stored in a CityJSON + Energy Extension file, which is not significant considering the high amount of data stored in the file. Overall, this paper shows that the CityJSON Energy Extension could provide an easy-to-use alternative to the CityGML Energy ADE.

14 October 2022 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Verified
Journal Article
Open access
PDF file
CSCamilo Alexander Leon Sanchez
Camilo Alexander Leon Sanchez
GAGiorgio Agugiaro
Giorgio Agugiaro
JSJ. Stoter
J. Stoter
This document introduces the process for the creation of a testbed for energy applications based on a semantic 3D city model for the municipality of Rijssen-Holten in The Netherlands. The creation of this dataset requires the consolidation from multiple data sources as well as a lot of manual work so the authors can warranty as much as possible the quality of the dataset so in can be used in several use cases. The data is stored following the OGC standard CityGML v2.0 and contain the geometrical and semantical information of CityObjects from the thematic modules Building, Vegetation and Relief. This data set consolidates the open weather data from the closest weather station to the study area located in Heino in the Netherlands. We discuss the decisions taken during the manual data collection process and we present some use cases that have already consume the dataset at the time of writing this document.

3 September 2021 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Verified
Journal Article
Open access
PDF file
CSCamilo Alexander Leon Sanchez
Camilo Alexander Leon Sanchez
DGD. Giannelli
D. Giannelli
GAGiorgio Agugiaro
Giorgio Agugiaro
JSJ. Stoter
J. Stoter
The 3D BAG v. 2.0 dataset has been recently released: it is a country-wide dataset containing all buildings in the Netherlands, modelled in multiple LoDs (LoD1.2, LoD1.3 and LoD2.2). In particular, the LoD2.2 allows differentiating between different thematic surfaces composing the building envelope. This paper describes the first steps to test and use the 3D BAG 2.0 to perform energy simulations and characterise the energy performance of the building stock. Two well-known energy simulation software packages have been tested: SimStadt and CitySim Pro. Particular care has been paid to generate a suitable, valid CityGML test dataset, located in the municipality of Rijssen-Holten in the central-eastern part of the Netherlands, that has been then used to test the energy simulation tools. Results from the simulation tools have been then stored into the 3D City Database, additionally extended to deal with the CityGML Energy ADE. The whole workflow has been checked in order to guarantee a lossless dataflow.The paper reports on the proposed workflow, the issues encountered, some solutions implemented, and what the next steps will be.

3 January 2025 in Transactions in GIS
Verified
Journal Article
Open access
CSCamilo Alexander Leon Sanchez
Camilo Alexander Leon Sanchez
DGDenis Giannelli
Denis Giannelli
GAGiorgio Agugiaro
Giorgio Agugiaro
JSJantien Stoter
Jantien Stoter
This paper performs, describes, and evaluates a comparison of seven software tools (ArcGIS Pro, GRASS GIS, SAGA GIS, CitySim, Ladybug, SimStadt, and UMEP) to calculate solar irradiation. The analysis focuses on data requirements, software usability, and accuracy simulation output. The use case for the comparison is solar irradiation on building surfaces, in particular on roofs. The research involves collecting and preparing spatial and weather data. Two test areas—the Santana district in São Paulo, Brazil, and the Henio rural area in Raalte, the Netherlands—were selected. In both cases, the study area encompasses the vicinity of a weather station. Therefore, the meteorological data from these stations serve as ground truth for the validation of the simulation results. We create several models (raster and vector) to meet the diverse input requirements. We present our findings and discuss the output from the software tools from both quantitative and qualitative points of view. Vector‐based simulation models offer better results than raster‐based ones. However, they have more complex data requirements. Future research will focus on evaluating the quality of the simulation results on vertical and tilted surfaces as well as the calculation of direct and diffuse solar irradiation values for vector‐based methods.