Dhanumalayan Elumalai

Dr. Dhanumalayan Elumalai

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
DEDhanumalayan Elumalai
Dhanumalayan Elumalai
BFBeatriz Rodríguez Fernández
Beatriz Rodríguez Fernández
GKGanna Kovtun
Ganna Kovtun
PAPedro Hidalgo Alcalde
Pedro Hidalgo Alcalde
BMBianchi Méndez
Bianchi Méndez
Teresa CuberesTeresa Cuberes
Teresa Cuberes
This study focuses on the fabrication of polymer nanocomposite films using polyvinyl alcohol (PVA)/graphene quantum dots (GQDs). We investigate the relationship between the structural, thermal, and nanoscale morphological properties of these films and their photoluminescent response. Although according to X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and differential thermal analysis (DTA), the incorporation of GQDs does not significantly affect the percentage crystallinity of the PVA matrix, for a range of added GQD concentrations, atomic force microscopy (AFM) showed the formation of islands with apparent crystalline morphology on the surface of the PVA/GQD films. This observation suggests that GQDs presumably act as nucleating agents for island growth. The incorporation of GQDs also led to the formation of characteristic surface pores with increased stiffness and frictional contrast, as indicated by ultrasonic force microscopy (UFM) and frictional force microscopy (FFM) data. The photoluminescence (PL) spectra of the films were found to depend both on the amount of GQDs incorporated and on the film morphology. For GQD loads >1.2%wt, a GQD-related band was observed at ~1650 cm−1 in FT-IR, along with an increase in the PL band at lower energy. For a load of ~2%wt GQDs, the surface morphology was characterized by extended cluster aggregates with lower stiffness and friction than the surrounding matrix, and the PL signal decreased.

25 October 2024 in Molecules
Verified
Journal Article
Open access
PDF file
DEDhanumalayan Elumalai
Dhanumalayan Elumalai
RHRamin Hosseinnezhad
Ramin Hosseinnezhad
VBVladyslav Bondarenko
Vladyslav Bondarenko
JMJerzy Morawiec
Jerzy Morawiec
Iurii VozniakIurii Vozniak
Iurii Vozniak
Andrzej GaleskiAndrzej Galeski
Andrzej Galeski
This paper presents the novel development of a shape memory polymer foam based on polymer–polymer nanocomposites. Herein, polylactide (PLA)/biosourced polyamide (PA) foams are fabricated by in situ fibrillation of polymer blends and a subsequent supercritical CO2 foaming technique. In this system, PLA serves as a shape memory polymer to endow this foam with a shape memory effect (SME), and in situ generated PA nanofibers are employed to reinforce the PLA cell walls and provide an additional permanent phase. A concentration of PA, 5 wt.%, was chosen to form an entangled nanofibrillar network. Foams of PLA/PA nanoblends with the same content of constituents were fabricated to reveal the effect of minor phase morphology on the cell structure and shape memory behavior of polymer foams. Profiting from the reinforcing effect of PA nanofibers, the PLA/PA nanocomposite foam exhibits smaller foam cells, a narrower cell size distribution and a comparable cell concentration than the PLA/PA nanoblend foam. In addition, PA nanofibers, unlike PA nanodroplets, favor the shape fixation ratio and recovery ratio and shorten the shape recovery time.

26 October 2023 in Polymers
Verified
Journal Article
Open access
PDF file
RHRamin Hosseinnezhad
Ramin Hosseinnezhad
DEDhanumalayan Elumalai
Dhanumalayan Elumalai
Iurii VozniakIurii Vozniak
Iurii Vozniak
The mechanical behavior of polymer materials is heavily influenced by a phenomenon known as crazing. Crazing is a precursor to damage and leads to the formation of cracks as it grows in both thickness and tip size. The current research employs an in situ SEM method to investigate the initiation and progression of crazing in all-biopolymeric blends based on Polyhydroxyalkanoates (PHAs). To this end, two chemically different grades of PHA, namely poly(hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV), were melt-blended with polybutyrate adipate terephthalate (PBAT). The obtained morphologies of blends, the droplet/fibrillar matrix, were highly influenced by the plasticity of the matrices as well as the content of the minor phase. Increasing the concentration of PBAT from 15 to 30 wt.% resulted in the brittle to ductile transition. It changed the mechanism of plastic deformation from single craze-cracking to homogeneous and heterogeneous intensified crazing for PHB and PHBHV matrices, respectively. Homogeneous tensile crazes formed perpendicularly to the draw direction at the initial stages of deformation, transformed into shear crazes characterized by oblique edge propagation for the PHBHV/PBAT blend. Such angled crazes suggested that the displacement might be caused by shear localized deformation. The crazes’ strength and the time to failure increased with the minor phase fibers. These fibers, aligned with the tensile direction and spanning the width of the crazes, were in the order of a few micrometers in diameter depending on the concentration. The network of fibrillar PBAT provided additional integrity for larger plastic deformation values. This study elucidates the mechanism of crazing in PHA blends and provides strategies for controlling it.

23 March 2018 in Journal of Inorganic and Organometallic Polymers and Materials
Verified
Journal Article
Closed access
PDF file
DEDhanumalayan Elumalai
Dhanumalayan Elumalai
GJGirish M. Joshi
Girish M. Joshi

27 August 2025 in Industrial & Engineering Chemistry Research
Verified
Journal Article
Open access
DEDhanumalayan Elumalai
Dhanumalayan Elumalai
RHRamin Hosseinnezhad
Ramin Hosseinnezhad
IVIurii Vozniak
Iurii Vozniak
JMJerzy Morawiec
Jerzy Morawiec
AGAndrzej Galeski
Andrzej Galeski

23 April 2025 in ACS Applied Polymer Materials
Verified
Journal Article
Open access
MKMehrnaz Khalaji
Mehrnaz Khalaji
RHRamin Hosseinnezhad
Ramin Hosseinnezhad
DEDhanumalayan Elumalai
Dhanumalayan Elumalai
IVIurii Vozniak
Iurii Vozniak
FZFahmi Zaïri
Fahmi Zaïri