Guided wave ultrasound (GWU) systems have been widely used for monitoring structures such as rails, pipelines, and plates. In railway tracks, the monitoring process involves the complicated propagation of waves over several hundred meters. The propagating waves are multi-modal and interact with discontinuities differently, increasing complexity and leading to different response signals. When the researcher wants to gain insight into the behavior of guided waves, predicting response signals for different combinations of modes becomes necessary. However, the task can become computationally costly when physics-based models are used. Digital twins can enable a practitioner to deal systematically with the complexities of guided wave monitoring in practical or user-specified settings. This paper investigates the use of a hybrid digital model of an operational rail track to predict response signals for varying user-specified settings, specifically, the prediction of response signals for various combinations of modes of propagation in the rail. The digital twin hybrid model employs a physics-based model and a data-driven model. The physics-based model simulates the wave propagation response using techniques developed from the traditional 3D finite element method and the 2D semi-analytical finite element method (FEM). The physics-based model is used to generate virtual experimental signals containing different combinations of modes of propagation. These response signals are used to train the data-driven model based on a variational auto-encoder (VAE). Given an input baseline signal containing only the most dominant mode excited by a transducer, the VAE is trained to predict an inspection signal with increased complexity according to the specified combination of modes. The results show that, once the VAE has been trained, it can be used to predict inspection signals for different combinations of propagating modes, thus replacing the physics-based model, which is computationally costly. In the future, the VAE architecture will be adapted to predict response signals for varying environmental and operational conditions.
Developing reliable ultrasonic-guided wave monitoring systems requires a significant amount of inspection data for each application scenario. Experimental investigations are fundamental but require a long period and are costly, especially for real-life testing. This is exacerbated by a lack of experimental data that includes damage. In some guided wave applications, such as pipelines, it is possible to introduce artificial damage and perform lab experiments on the test structure. However, in rail track applications, laboratory experiments are either not possible or meaningful. The generation of synthetic data using modelling capabilities thus becomes increasingly important. This paper presents a variational autoencoder (VAE)-based deep learning approach for generating synthetic ultrasonic inspection data for welded railway tracks. The primary aim is to use a VAE model to generate synthetic data containing damage signatures at specified positions along the length of a rail track. The VAE is trained to encode an input damage-free baseline signal and decode to reconstruct an inspection signal with damage by adding a damage signature on either side of the transducer by specifying the distance to the damage signature as an additional variable in the latent space. The training data was produced from a physics-based model that computes virtual experimental response signals using the semi-analytical finite element and the traditional finite element procedures. The VAE reconstructed response signals containing damage signatures were almost identical to the original target signals simulated using the physics-based model. The VAE was able to capture the complex features in the signals resulting from the interaction of multiple propagating modes in a multi-discontinuous waveguide. The VAE model successfully generated synthetic inspection data by fusing reflections from welds with the reflection from a crack model at specified distances from the transducer on either the right or left side. In some cases, the VAE did not exactly reconstruct the peak amplitude of the reflections. This study demonstrated the potential and highlighted the benefit of using a VAE to generate synthetic data with damage signatures as opposed to using superposition to fuse the damage-free responses containing reflections from welds with a damage signature. The results show that it is possible to generate realistic inspection data for unavailable damage scenarios.
A permanently installed Ultrasonic Broken Rail Detection system monitors the Sishen-Saldanha railway line in South Africa [1]. The system detects complete rail breaks at long-range using guided wave ultrasound. For the system to be reliable, its damage detection performance must be evaluated under actual environmental and operational conditions (EOCs). However, obtaining monitoring data containing damage reflections is virtually impossible since detected defects in operational rail track sections are immediately removed and replaced with new rail. Laboratory experiments are also not possible since end reflections from short sections of rail dominate the response. Therefore, damage signals can only practically be obtained from numerical simulations. The simulated damage signals should be realistic and include varying EOCs, especially temperature variations. This paper aims to demonstrate a procedure to model temperature variations in ultrasonic signals. The temperature model and the modelling framework developed in [2] are used to simulate reflections from welds. The framework models the excitation, propagation and scattering of GWs from discontinuities by employing a hybrid model based on the 3D Finite Element method and the 2D Semi-Analytical Finite Element method. The simulated results are validated using experimental measurements collected from an operational rail at different temperatures.
A permanently installed Ultrasonic Broken Rail Detection (UBRD) system monitors the Sishen-Saldanha heavy-haul railway line in South Africa \[1\]. The system detects complete breaks in the rail by relying on ultrasonic guided waves propagating in the head of the rail. Research efforts are currently underway to upgrade the UBRD system to detect damage such as cracks before complete