Flor Magaly Santander

Prof. Flor Magaly Santander

Lima, Universidad Peruana de Ciencias Aplicadas, Lima, Peru
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 December 2022 in Biomedicines
Verified
Journal Article
Open access
PDF file
JZJorge Zamudio-Santiago
Jorge Zamudio-Santiago
MCMARYSELA IRENE LADERA CASTAÑEDA
MARYSELA IRENE LADERA CASTAÑEDA
Flor Magaly SantanderFlor Magaly Santander
Flor Magaly Santander
CLCarlos López-Gurreonero
Carlos López-Gurreonero
ACAlberto Cornejo-Pinto
Alberto Cornejo-Pinto
César Félix Cayo-RojasCésar Félix Cayo-Rojas
César Félix Cayo-Rojas
Background: Activated charcoal is a nanocrystalline form of carbon with a large specific surface area and high porosity in the nanometer range, having consequently the capacity to absorb pigments, chromophores, and stains responsible for tooth color change, while carbamide peroxide is unstable and breaks down immediately upon contact with tissue and saliva, first dissociating into hydrogen peroxide and urea and subsequently into oxygen, water, and carbon dioxide. Therefore, the aim of the present study was to assess the effect of 16% carbamide peroxide and activated-charcoal-based whitening toothpaste on enamel surface roughness in bovine teeth. Materials and Methods: The present experimental in vitro, longitudinal, and prospective study consisted of 60 teeth randomly distributed in six groups: A: artificial saliva, B: conventional toothpaste (Colgate Maximum Protection), C: whitening toothpaste with activated charcoal (Oral-B 3D White Mineral Clear), D: 16% carbamide peroxide (Whiteness Perfect 16%), E: 16% carbamide peroxide plus conventional toothpaste (Whiteness Perfect 16% plus Colgate Maximum Protection), and F: 16% carbamide peroxide plus whitening toothpaste with activated charcoal (Whiteness Perfect 16% plus Oral-B 3D White Mineral Clear). Surface roughness was assessed with a digital roughness meter before and after each treatment. For the statistical analysis, Student’s t test for related samples was used, in addition to the ANOVA test for one intergroup factor, considering a significance level of p < 0.05. Results: The surface roughness variation of bovine tooth enamel, before and after application of bleaching agent, was higher in groups of whitening toothpaste with activated charcoal (0.200 µm, Confidence Interval (CI): 0.105; 0.296 µm) and 16% carbamide peroxide plus whitening toothpaste with activated charcoal (0.201 µm, (CI): 0.092; 0.309 µm). In addition, bovine teeth treated with conventional toothpaste (p = 0.041), whitening toothpaste with activated charcoal (p = 0.001), and 16% carbamide peroxide plus whitening toothpaste with activated charcoal (p = 0.002) significantly increased their surface roughness values. On the other hand, significant differences were observed when comparing the variation in surface roughness between the application of artificial saliva (control) and the whitening toothpaste with activated charcoal (p = 0.031), and the 16% carbamide peroxide plus whitening toothpaste with activated charcoal (p = 0.030). Conclusion: The use of whitening toothpaste with activated charcoal and in combination with 16% carbamide peroxide significantly increased enamel surface roughness in bovine teeth.

27 July 2022 in Crystals
Verified
Journal Article
Open access
PDF file
MZMarlon Zamalloa-Quintana
Marlon Zamalloa-Quintana
CLCarlos López-Gurreonero
Carlos López-Gurreonero
Flor Magaly SantanderFlor Magaly Santander
Flor Magaly Santander
MCMARYSELA IRENE LADERA CASTAÑEDA
MARYSELA IRENE LADERA CASTAÑEDA
AVAntonieta Castro-Pérez Vargas
Antonieta Castro-Pérez Vargas
César Félix Cayo-RojasCésar Félix Cayo-Rojas
César Félix Cayo-Rojas
Aim: Additional dry heat curing is a method that favorably influences the mechanical properties of an indirect resin composite restoration. Microflexural strength is a property currently applied for the evaluation of indirect resin composite restorations. The aim of the present study was to assess the effect of additional dry heat curing on microflexural strength in three types of direct-use resin composites. Materials and Methods: This in vitro study consisted of 70 resin composites samples made with a 6 × 2 × 1 mm metal matrix and divided into seven experimental groups, which included Gr1a: Tetric N-Ceram without additional dry heat curing (n = 10); Gr1b: Tetric N-Ceram with additional dry heat curing (n = 10); Gr 2a: Filtek Z350 XT without additional dry heat curing (n = 10); Gr2b: Filtek Z350 XT with additional dry heat curing (n = 10); Gr3a: Filtek Z250 without additional dry heat curing (n = 10); Gr3b: Filtek Z250 with additional dry heat curing (n = 10); and Gr4: SR Nexco Paste (control) without additional dry heat curing (n = 10). The samples were stored in distilled water at 37 °C for 24 h. A universal testing machine with a 2000 N load cell at a speed of 1 mm/min was used to assess flexural strength. The data were analyzed with a parametric ANOVA test with Tukey’s post hoc intergroup factor (for groups without heat treatment) and a nonparametric Kruskall Wallis test with Bonferroni’s post hoc (for groups with heat treatment). In addition, the comparison of independent groups in each resin composite type with and without heat treatment was performed with a Mann Whitney U test. A significance level of p < 0.05 was considered. Results: The Filtek Z250 resin composite with and without additional dry heat curing presented the highest microflexural strength values with 137.27 ± 24.43 MPa and 121.32 ± 9.74 MPa, respectively, while the SR Nexco Paste (control) resin composite presented the lowest microflexural strength values with 86.06 ± 14.34 MPa compared to all the resin composites with additional dry heat curing. The Filtek Z250 and Filtek Z350XT resin composites with and without additional dry heat curing presented significantly higher microflexural strength versus the SR Nexco (p < 0.05) and Tetric N-Ceram (p < 0.05) resin composites. In addition, the Filtek Z350XT and Tetric N-Ceram resin composites with additional dry heat curing showed significantly higher microflexural strength (p < 0.05) compared to those without additional dry heat curing. Conclusions: The Filtek Z250 and Z350XT resin composites had significantly higher microflexural strength values with and without additional dry heat curing. In addition, the Filtek Z350XT and Tetric N-Ceram resin composites subjected to additional dry heat curing showed significantly higher microflexural strength compared to when they did not receive the same procedure, a situation that did not occur with the Filtek Z250 resin composite.

12 October 2022 in Polymers
Verified
Journal Article
Open access
PDF file
EAEsther Alcántara-Obispo
Esther Alcántara-Obispo
Flor Magaly SantanderFlor Magaly Santander
Flor Magaly Santander
MCMARYSELA IRENE LADERA CASTAÑEDA
MARYSELA IRENE LADERA CASTAÑEDA
CLCarlos López-Gurreonero
Carlos López-Gurreonero
APAntonieta Castro Pérez-Vargas
Antonieta Castro Pérez-Vargas
César Félix Cayo-RojasCésar Félix Cayo-Rojas
César Félix Cayo-Rojas
The success and longevity of a resin composite restoration is determined by its good bonding to the tooth structure, with the adhesion being a challenge to dentin due to its complexity and structural heterogeneity. The present study aimed to compare the adhesive strength of dentin conditioned with 18% ethylenediaminetetraacetic acid (EDTA) versus 35% phosphoric acid (H3PO4) in human premolars. Materials and Methods: This in vitro experimental study was performed on 40 human premolars. The occlusal thirds were sectioned and randomly placed into four groups according to the type of dentin conditioning: Group 1 (control), Group 2 (18% EDTA), Group 3 (35% H3PO4) and Group 4 (18% EDTA plus 35% H3PO4). Then, 10,000 thermocycles between 5 +/− 2 °C and 55 +/− 2 °C were applied. Adhesive strength was tested by shearing with a digital universal testing machine at a crosshead speed of 0.75 mm/min. The values obtained were analyzed in megapascals (MPa). The mean and standard deviation were used as measures of central tendency and dispersion. In addition, a one-factor intergroup ANOVA test was applied with Tukey’s post hoc test considering a significance level of p < 0.05. Results: The 18% EDTA and 18% EDTA plus 35% H3PO4 showed significantly higher adhesive strength compared to the control group that did not receive dentin conditioning (p = 0.047 and p < 0.001, respectively). However, the group conditioned with 18% EDTA did not present significant differences compared to the group conditioned with 35% H3PO4 (p = 0.997). In addition, the group conditioned with 18% EDTA plus 35% H3PO4 showed significantly higher adhesive strength compared to the groups conditioned with 18% EDTA (p = 0.002) and 35% H3PO4 (p = 0.001). Conclusion: The adhesion of bulk fill resin composite to dentin was favorable when preconditioning was performed using 18% EDTA followed by 35% H3PO4. In contrast, when both etchants were used separately, the bulk fill resin composite showed similar bond strength values in both cases, but significantly lower compared to their sequential application.

1 January 2023 in Journal of International Society of Preventive and Community Dentistry
Verified
Journal Article
Open access
Flor Magaly SantanderFlor Magaly Santander
Flor Magaly Santander
DCDiana E Castillo-Andamayo
Diana E Castillo-Andamayo
LTLidia Y Tay
Lidia Y Tay
CLCarlos López-Gurreonero
Carlos López-Gurreonero
ACAlberto Cornejo-Pinto
Alberto Cornejo-Pinto
César Félix Cayo-RojasCésar Félix Cayo-Rojas
César Félix Cayo-Rojas
Aim: The use of chemical agents in the surface treatment of glass fiber posts can improve their bond strength to the root canal. The aim of this study was to assess the bond strength and failure mode of glass fiber posts that received different surface treatments prior to silanization. Materials and Methods: In this cross-sectional and in vitro experimental study, 50 human lower premolar roots were randomly divided into five groups and subsequently prepared to receive the cementation of a fiberglass post prior to silanization. They were distributed as group 1 (with 24% hydrogen peroxide), group 2 (with 37% phosphoric acid), group 3 (with 1.23% acidulated phosphate fluoride for 2 minutes), group 4 (with 1.23% acidulated phosphate fluoride for 6 minutes), and group 5 (without pretreatment). After cementation, the roots were sectioned into two discs for each cervical, middle, and apical region. Bond strength was assessed using the push out technique. Adhesive, mixed, and cohesive failure modes were also assessed. For data analysis, ANOVA and Tukey’s post hoc tests were used, as well as Pearson’s chi-square test. A significance of P < 0.05 was considered in all statistical analyses. Results: When comparing the bond strength of root regions, significant differences were obtained in groups pretreated with phosphoric acid (P = 0.018) and acidulated phosphate fluoride for 2 and 6 minutes (P = 0.001 and P = 0.000, respectively). Furthermore, significant differences were obtained between posts treated only with silane and those that received phosphoric acid pretreatment (P = 0.006) and acidulated phosphate fluoride for 6 minutes (P = 0.001). Significant association of mixed failure mode was observed with hydrogen peroxide (P = 0.014) and phosphoric acid (P = 0.006) pretreatments. Cohesive failure was significantly associated with acidulated phosphate fluoride pretreatment for 2 minutes (P = 0.032) and with posts that did not receive treatment prior to silanization (P = 0.000). Conclusion: Posts treated only with silane and pretreated with hydrogen peroxide and acidulated phosphate fluoride for 2 minutes presented significantly higher bond strength with respect to those pretreated with phosphoric acid and acidulated phosphate fluoride for 6 minutes. However, acidulated phosphate fluoride for 2 minutes and silane were associated with a better bonding type.

17 November 2022 in International Dental Journal
Verified
Journal Article
Open access
JBJulissa Berto-Inga
Julissa Berto-Inga
Flor Magaly SantanderFlor Magaly Santander
Flor Magaly Santander
MLMarysela Ladera-Castañeda
Marysela Ladera-Castañeda
CLCarlos López-Gurreonero
Carlos López-Gurreonero
APAntonieta Castro Pérez-Vargas
Antonieta Castro Pérez-Vargas
César Félix Cayo-RojasCésar Félix Cayo-Rojas
César Félix Cayo-Rojas
It has been reported that resin composites may experience alterations in their mechanical properties when they come into contact with glove powder. Therefore, the present study aimed to compare the surface microhardness of 3 bulk-fill resin composites handled with latex and nitrile gloves prior to light curing. This in vitro experimental study consisted of 90 resin composite specimens with a 6-mm diameter and a 4-mm height divided equally and randomly into 9 groups. Prior to light curing, the resin composites were handled with latex gloves, nitrile gloves, or only a spatula (control). Subsequently, the surface microhardness was measured with an Electronic Vickers Hardness Tester. The Kruskal–Wallis nonparametric H test with Bonferroni correction was used for comparisons. A significance level of 5% (P < .05) was considered. When comparing surface microhardness of each resin composite according to type of handling received, significant differences were observed in Filtek One Bulk Fill (P < .001) and Opus Bulk Fill (P < .001). In addition, these resin composites presented significantly higher surface microhardness than Tetric N-Ceram Bulk Fill resin (P < .05) when handled with latex gloves, nitrile gloves, and only a spatula. Finally, Filtek Bulk Fill resin presented significantly higher surface microhardness compared to Opus Bulk Fill resin when handled with nitrile gloves (P = .038) and a spatula only (P = .033). The surface microhardness of Filtek One Bulk Fill and Opus Bulk Fill resin composites decreased significantly when handled with latex or nitrile gloves, showing no variation in Tetric N-Ceram Bulk Fill resin composite. In addition, Filtek One Bulk Fill resin composite showed significantly higher surface microhardness than Opus Bulk Fill and Tetric N-Ceram Bulk Fill resin composites when handled with nitrile gloves. It is recommended that bulk-fill resin composites be handled with a spatula, because the use of latex or nitrile gloves could adversely affect their clinical performance.

30 January 2023 in BMC Oral Health
Verified
Journal Article
Open access
PDF file
PLPaolo Lurita-Córdova
Paolo Lurita-Córdova
MCMARYSELA IRENE LADERA CASTAÑEDA
MARYSELA IRENE LADERA CASTAÑEDA
Flor Magaly SantanderFlor Magaly Santander
Flor Magaly Santander
CLCarlos López-Gurreonero
Carlos López-Gurreonero
ACAlberto Cornejo-Pinto
Alberto Cornejo-Pinto
César Félix Cayo-RojasCésar Félix Cayo-Rojas
César Félix Cayo-Rojas
Background: Epilepsy is a chronic neurological disease that could indirectly affect oral health, and it is necessary for dentists to be familiar with the specific needs of patients with epilepsy. Therefore, aim of the present study was to assess the factors associated with the level of knowledge about management of epileptic patients in Peruvian dental students.Methods: This analytical, observational, cross-sectional and prospective study assessed 312 dental students from a Peruvian university during February to April 2022. A validated questionnaire of 20 closed multiple-choice questions was used to measure the level of knowledge about dental management in epileptic patients. A logit model was used to assess the influence of variables: gender, age, year of study, marital status, place of origin and area of residence, with the level of knowledge in dental students considering a significance level ofp < 0.05.Results: Of the total, 28.8%, 36.2% and 34.9% had a poor, fair and good level of knowledge, respectively, about the dental treatment of epileptic patients. On the other hand, it was observed that being a woman (OR = 0.44, CI 0.26–0.75) and being a third year student (OR = 0.39, CI 0.21–0.74) and fourth year student (OR = 0.43, CI 0.23–0.89) constituted a protective factor against poor knowledge about the dental management of epileptic patients, while being from the capital city constituted a risk factor. Finally, age, marital status and the students' area of residence were not considered influential factors (p > 0.05).Conclusion: Most of the students showed a poor and fair level of knowledge about the dental management of epileptic patients, with gender, academic year and place of origin being influential factors. It is advisable that authorities and teachers in the dental profession organize recurrent training programs on the care of patients with chronic diseases requiring special attention, since knowing general concepts, pharmacological management and dental care of epileptic patients will allow future dentists to develop competencies to improve and implement good quality care protocols for this group of patients.