Geopolymer concrete (GPC) has drawn widespread attention as a universally accepted ideal green material to improve environmental conditions in recent years. The present study systematically quantifies and compares the environmental impact of fly ash GPC and ordinary Portland cement (OPC) concrete under different strength grades by conducting life cycle assessment (LCA). The alkali activator solution to fly ash ratio (S/F), sodium hydroxide concentration (CNaOH), and sodium silicate to sodium hydroxide ratio (SS/SH) were further used as three key parameters to consider their sensitivity to strength and CO2 emissions. The correlation and influence rules were analyzed by Multivariate Analysis of Variance (MANOVA) and Gray Relational Analysis (GRA). The results indicated that the CO2 emission of GPC can be reduced by 62.73%, and the correlation between CO2 emission and compressive strength is not significant for GPC. The degree of influence of the three factors on the compressive strength is CNaOH (66.5%) > SS/SH (20.7%) > S/F (9%) and on CO2 emissions is S/F (87.2%) > SS/SH (10.3%) > CNaOH (2.4%). Fly ash GPC effectively controls the environmental deterioration without compromising its compressive strength; in fact, it even in favor.
Using construction and demolition waste composites (CDWC) and fly ash (FA) to replace cement to produce concrete can reduce CO2 emissions. However, the CDWC-based geopolymer materials have two imperfections: the compressive strength is prone to decrease with the increase of curing age (strength shrinkage) under heat curing conditions, and the strength develops slowly under ambient curing conditions. To solve the problems of these materials, on the one hand, we designed an experiment of preparing CDWC-based geopolymer concrete (CDWGC) with pretreated CDWC at different high temperatures. We analyzed the influence of different pretreatment temperatures on the mechanical properties of CDWGC through compressive strength, SEM-EDS and XRD. On the other hand, we added CaO to improve the mechanical properties of CDWC-based geopolymer paste (CDWGP) under ambient curing conditions. Further, the CO2 emissions of pretreating CDWC and adding CaO were calculated by life cycle assessment (LCA). The results show that: (1) Pretreatment of CDWC can effectively solve the problem of CDWGC strength shrinkage. (2) The compressive strength of CDWGP cured at ambient can be significantly improved by adding CaO, and the compressive strength can be increased by 180.9% when the optimum content is 3%. (3) Adding CaO had less impact on CO2 emissions, a low-carbon way to improve its strength effectively.