Xiaoshuang Shi

Prof. Xiaoshuang Shi

College of Architecture and Environment, Sichuan University, Chengdu, China
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
Xiaoshuang ShiXiaoshuang Shi
Xiaoshuang Shi
CZCong Zhang
Cong Zhang
YLYongchen Liang
Yongchen Liang
LQLuo JIn Qian
Luo JIn Qian
XWXiaoqi Wang
Xiaoqi Wang
AAAbd El-Fatah Abomohra
Abd El-Fatah Abomohra
Geopolymer concrete (GPC) has drawn widespread attention as a universally accepted ideal green material to improve environmental conditions in recent years. The present study systematically quantifies and compares the environmental impact of fly ash GPC and ordinary Portland cement (OPC) concrete under different strength grades by conducting life cycle assessment (LCA). The alkali activator solution to fly ash ratio (S/F), sodium hydroxide concentration (CNaOH), and sodium silicate to sodium hydroxide ratio (SS/SH) were further used as three key parameters to consider their sensitivity to strength and CO2 emissions. The correlation and influence rules were analyzed by Multivariate Analysis of Variance (MANOVA) and Gray Relational Analysis (GRA). The results indicated that the CO2 emission of GPC can be reduced by 62.73%, and the correlation between CO2 emission and compressive strength is not significant for GPC. The degree of influence of the three factors on the compressive strength is CNaOH (66.5%) > SS/SH (20.7%) > S/F (9%) and on CO2 emissions is S/F (87.2%) > SS/SH (10.3%) > CNaOH (2.4%). Fly ash GPC effectively controls the environmental deterioration without compromising its compressive strength; in fact, it even in favor.

1 February 2021 in Construction and Building Materials
Verified
Journal Article
Closed access
CLChenchen Luan
Chenchen Luan
Xiaoshuang ShiXiaoshuang Shi
Xiaoshuang Shi
KZKuanyu Zhang
Kuanyu Zhang
NUNodir Utashev
Nodir Utashev
FYFuhua Yang
Fuhua Yang
QWQingyuan Wang
Qingyuan Wang

30 December 2019 in International Journal of Concrete Structures and Materials
Verified
Journal Article
Open access
PDF file
HZHongen Zhang
Hongen Zhang
LLLang Li
Lang Li
PSPrabir Kumar Sarker
Prabir Kumar Sarker
TLTao Long
Tao Long
Xiaoshuang ShiXiaoshuang Shi
Xiaoshuang Shi
Gaochuang CaiGaochuang Cai
Gaochuang Cai
This work quantified the hierarchy of the influence of three common mixture design parameters on the compressive strength and the rate of strength increase over the long term of low-calcium fly ash geopolymer concrete (FAGC) through designing 16 mixtures by the orthogonal experimental design (OED) method. The parameters used in the study were liquid to fly ash (L/FA) ratio, sodium hydroxide concentration (SHC) and sodium silicate solution to sodium hydroxide solution (SS/SH) ratio. The L/FA ratio showed little effect on compressive strength when it was varied from 0.40 to 0.52. SHC showed the greatest influence on compressive strength with little impact on the rate of strength increase after the initial heat curing. Even though the SS/SH ratio showed a small effect on the initial compressive strength, it had a considerable influence on the rate of strength increase over the long term. It was found that the compressive strength at 480 days was positively related to the Na2O/SiO2 molar ratio when it was varied from 0.49 to 0.80 and the Si/Al molar ratio was increased up to 1.87. Analysis of the failure types of specimens demonstrated that compressive strength of FAGC was associated with the strength of the mortar–aggregate interface zone (MAIZ).

25 August 2023 in Construction and Building Materials
Verified
Journal Article
Closed access
Xiaoshuang ShiXiaoshuang Shi
Xiaoshuang Shi
YFYing Feng
Ying Feng
YZYuhao Zhang
Yuhao Zhang
YSYanpeng Su
Yanpeng Su

7 August 2019 in Materials
Verified
Journal Article
Open access
PDF file
HZHongen Zhang
Hongen Zhang
LLLang Li
Lang Li
TLTao Long
Tao Long
Prabir Kumar Sarker SarkerPrabir Kumar Sarker Sarker
Prabir Kumar Sarker Sarker
Xiaoshuang ShiXiaoshuang Shi
Xiaoshuang Shi
Qingyuan WangQingyuan Wang
Qingyuan Wang
The influence of using cement on the residual properties of fly ash geopolymer concrete (FAGC) after exposure to high temperature of up to 800 °C was studied in terms of mass loss, residual compressive strength and microstructure. The mass loss was found to increase with the increase of exposure temperature, which is attributed to vaporization of water and dehydroxylation of sodium aluminosilicate hydrate (N-A-S-H) gels. The dehydroxylation of calcium silicate hydrate (C-S-H) gels and the disintegration of portlandite were responsible for higher mass loss ratio of FAGCs containing cement. The results showed that cement could increase compressive strength of FAGCs up to 200 °C, after which a significant reduction in residual strength was observed. It was found that FAGCs without cement yielded higher residual strength than the original strength after heating up to 600 °C. The observed increase of compressive strength up to 200 °C was attributed to the secondary geopolymerization which was evidenced in the scanning electronic microscopy (SEM) images.

16 October 2017 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
TLTao Long
Tao Long
Qingyuan WangQingyuan Wang
Qingyuan Wang
ZGZhongwei Guan
Zhongwei Guan
YCYu Chen
Yu Chen
Xiaoshuang ShiXiaoshuang Shi
Xiaoshuang Shi
Fly ash geopolymer concrete (FAGC) and ordinary Portland cement concrete (OPCC) specimens were immersed in 5% MgSO4solution undergoing 32 wetting-drying and heating-cooling cycles. Their compressive behavior was investigated after every 8 cycles. Several microstructure analysis techniques were applied on the samples to identify the materials formed due to magnesium sulfate attack, including XRD, FTIR, SEM, and EDS. Experimental results elucidated that the compressive strength loss ratio in the heating group of FAGC was 12.7%, while that of OPCC was 17.8%, which means that FAGC had better magnesium sulfate resistance than OPCC. The compressive strength loss of OPCC was due to the formation of gypsum under the magnesium sulfate attack exposed to wetting-drying and heating-cooling cycles. The deterioration mechanisms of FAGC against MgSO4solution were discovered to be that sodium aluminum silicate hydrate (N-A-S-H) gels reacted with MgSO4, leading to the creation of low strength magnesium aluminum silicate hydrate (M-A-S-H) gels.