Tunable couplers have recently emerged as an essential component in superconducting quantum processors. These couplers usually do not have readout resonators to save control or hardware overhead; this makes it challenging to characterize and calibrate the coupler, which will undoubtedly limit the performance of a fast two-qubit gate. Here, we theoretically demonstrate that by mapping the coupler's state onto that of its neighboring qubit, the high-contrast readout of the coupler can be realized. We experimentally implement such a readout scheme with a single-shot readout fidelity of 86%, which is mainly limited by the thermal population of our sample. We further demonstrate how to calibrate the flux crosstalk related to the coupler and its flux distortion that are ignored in the previous works. These calibration steps are imperative for realizing robust and accurate quantum operations in frequency-tunable superconducting circuits.
In quantum computation, control signals are adversely affected by distortion due to nonidealities in control chains. In order to implement high-fidelity digital and analog quantum operations, one must characterize the distortion and compensate for it. Here, we propose and experimentally verify an extensible method to model the behavior of control lines with the system function and correct it with digital filters. We correct the distortion of the superconducting-qubit flux control lines within a precision of , which ensures gate fidelity free of the limit of pulse distortion. For the purpose of more accurate and scalable parameter extraction of the low-temperature line response, we employ an optimization-based protocol and the convergence is fast by setting the result of adjacent control lines with the same setup as the initial values. The techniques presented here improve distortion calibration efficiency and enable distortion-free operations, which paves the way for high-precision control of quantum computation and quantum simulation.
Airbridges are extensively employed in superconducting quantum circuits to suppress parasitic slotline modes in coplanar waveguide and minimize crosstalk between control lines. Here, we introduce a fabrication technique for airbridges, leveraging niobium as the bridge layer and aluminum as the sacrificial layer to preclude the introduction of lossy dielectrics or residues upon release. Additionally, we utilize a triangular evaporation method to significantly bolster the structural integrity of the airbridges. Our experimental evaluation, focused on resonators equipped with these airbridges, reveals that the resultant additional loss per bridge is minimal, quantified at (5.0±2.8)×10−9 in the single-photon regime and (6.3±0.9)×10−9 at high drive powers. This advancement underscores the potential of niobium airbridges in facilitating the development of large-scale and high-performance superconducting quantum circuits.
One significant source of decoherence in superconducting circuits is known as two-level systems (TLSs), found in amorphous oxide layers. These circuits can, however, also be utilized as spectral and temporal TLS probes. Comprehensive investigations on the physics of TLSs are now possible thanks to recent advancements in superconducting qubits. Here, we simultaneously measure the tunable Xmon qubit decoherence time as well as the resonance frequency for more than 3 days to investigate stochastic fluctuations. Time-domain Allan deviation and frequency-domain power spectral density analysis indicate that two TLSs in near resonance with the qubit are responsible for the fluctuations. From the extracted oscillation in decay, we locate the two TLSs near the junctions.
The quality of the oxide barrier in Josephson junctions (JJs) is crucial for devices with it as the core structure. Despite the critical nature of the oxidation process in JJ fabrication, there remains a lack of systematic research on its impact. Our study aims to fill this gap by comprehensively investigating the influence of oxidation parameters and methods on the oxide barrier quality. To achieve this, we evaluate the low-frequency 1/f noise of JJs produced using various fabrication processes. Our findings demonstrate that a weak oxidation strength (oxygen pressure × exposure time) and a dynamic oxidation method contribute positively to the formation of high-quality oxide barriers. This research provides an important reference for optimizing the oxidation process.
Quantum state transfer between distant nodes is essential for distributed quantum information processing. Existing protocols are typically optimized for specific coupling regimes, such as adiabatic dark-state transfer in the single-mode limit and pitch-and-catch schemes in the multimode regime, leaving the crossover between them without a simple and unified control strategy. Here, we identify a minimal two-parameter control framework that enables high-fidelity quantum state transfer across this single-mode–to–multimode crossover in a multimode quantum channel. Using a pulse-shaped pitch-and-catch protocol controlled only by the pulse ramp rate and the emission-absorption delay, we achieve transfer fidelities exceeding 99.9 % , extending pitch-and-catch protocols toward the single-mode limit without requiring dark-state protection or complex pulse design. We further demonstrate robustness against dissipation, disorder, detuning, and imperfect initialization under experimentally realistic conditions. These results provide a simple and broadly applicable framework for state transfer in multimode quantum channels, with relevance to circuit-QED and hybrid quantum-acoustic systems.