Tunable couplers have recently emerged as an essential component in superconducting quantum processors. These couplers usually do not have readout resonators to save control or hardware overhead; this makes it challenging to characterize and calibrate the coupler, which will undoubtedly limit the performance of a fast two-qubit gate. Here, we theoretically demonstrate that by mapping the coupler's state onto that of its neighboring qubit, the high-contrast readout of the coupler can be realized. We experimentally implement such a readout scheme with a single-shot readout fidelity of 86%, which is mainly limited by the thermal population of our sample. We further demonstrate how to calibrate the flux crosstalk related to the coupler and its flux distortion that are ignored in the previous works. These calibration steps are imperative for realizing robust and accurate quantum operations in frequency-tunable superconducting circuits.
A challenge in building large-scale superconducting quantum processors is the precise control and manipulation of the qubit state. However, the crosstalk between the microwave control lines impedes the parallel execution of high-fidelity digital and analog quantum operations. Here, we propose and demonstrate a universal compensation protocol for calibrating the microwave signal crosstalk. We also introduce amplified error sequences to optimize accuracy. Furthermore, we show a definitive improvement in parallel gate operations with crosstalk cancellation, demonstrating the technique's effectiveness. This work paves the way for superconducting hardware that features the automated calibration of microwave crosstalk, leading to enhanced fidelities in multiqubit circuits.
Airbridges are extensively employed in superconducting quantum circuits to suppress parasitic slotline modes in coplanar waveguide and minimize crosstalk between control lines. Here, we introduce a fabrication technique for airbridges, leveraging niobium as the bridge layer and aluminum as the sacrificial layer to preclude the introduction of lossy dielectrics or residues upon release. Additionally, we utilize a triangular evaporation method to significantly bolster the structural integrity of the airbridges. Our experimental evaluation, focused on resonators equipped with these airbridges, reveals that the resultant additional loss per bridge is minimal, quantified at (5.0±2.8)×10−9 in the single-photon regime and (6.3±0.9)×10−9 at high drive powers. This advancement underscores the potential of niobium airbridges in facilitating the development of large-scale and high-performance superconducting quantum circuits.
The quality of the oxide barrier in Josephson junctions (JJs) is crucial for devices with it as the core structure. Despite the critical nature of the oxidation process in JJ fabrication, there remains a lack of systematic research on its impact. Our study aims to fill this gap by comprehensively investigating the influence of oxidation parameters and methods on the oxide barrier quality. To achieve this, we evaluate the low-frequency 1/f noise of JJs produced using various fabrication processes. Our findings demonstrate that a weak oxidation strength (oxygen pressure × exposure time) and a dynamic oxidation method contribute positively to the formation of high-quality oxide barriers. This research provides an important reference for optimizing the oxidation process.
21 March 2026 in Future Generation Computer Systems