In this study, FeCrMoNbB (140MXC) and FeCMnSi (530AS) coatings were simultaneously projected on the substrate AISI-SAE 4340 using the electric wire arc spraying technique. The projection parameters, such as current (I), voltage (V), primary air pressure (1st), and secondary air pressure (2nd), were determined using the experimental model Taguchi L9 (34−2). Its main purpose is to produce dissimilar coatings and to evaluate the effect of the surface chemical composition on the corrosion resistance in the mixture of 140MXC-530AS as commercial coatings. Three phases were considered to obtain and characterize the coatings: Phase 1: Preparation of materials and projection equipment; Phase 2: Coatings production; and Phase 3: Coatings characterization. The characterization of the dissimilar coatings was carried out using the techniques of Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDX), Auger Electronic Spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). The results of this characterization corroborated the electrochemical behavior of the coatings. The presence of B was determined with the XPS characterization technique in the mixtures of the coatings in the form of Iron Boride. Moreover, the XRD technique showed Nb in the form of FeNb as a precursor compound for the 140MXC wire powder. The most relevant contributions are the pressures, provided that the quantity of oxides in the coatings decreases with respect to the reaction time between the molten particles and the atmosphere of the projection hood; moreover, for the corrosion potential, the operating voltage of the equipment does not exert any effect since these tend to remain constant.
Esta revisión se centra en la técnica conocida por el nombre de cavitación para el tratamiento de aguas residuales. Existen diversas maneras de lograr que un fluido cavite, el centro de atención de este documento son la cavitación hidrodinámica y cavitación acústica. La cavitación ocurre cuando de manera brusca un fluido cambia de fase por variación en la presión de este, las cavidades cuentan con una considerable cantidad de energía que favorece reacciones al interior e interfase de cada burbuja o cavidad que se forma en el seno del líquido, así como también en fluido. Esta técnica de tratamiento resulta favorable toda vez que por sí misma no implica el uso o dosificación de insumos químicos para reducir la concentración de contaminantes en el agua. Las fuentes consultadas señalan que para lograr una mayor efectividad del proceso de cavitación se hace necesario la intensificación del proceso por la implementación simultanea de otras técnicas de tratamiento, entre ellas los procesos de oxidación avanzada, procesos electroquímicos y clarificación del agua. Las combinaciones de cavitación con otras técnicas de tratamiento de aguas residuales han sido objeto de estudio para diferentes contaminantes recalcitrantes logrando resultados muy favorables. Este trabajo hizo énfasis principalmente como caso estudio las aguas residuales de curtiembres.
The Corporation of Science and Technology for the Development of the Maritime and Fluvial Shipbuilding Industry COTECMAR has been using for more than 4 years the process of electric arc thermal projection with commercial materials such as 530AS, 560AS and 140MXC to mitigate corrosion phenomena and wear of the different devices that make up the boats. The problem lies in mixing these materials (140MXC-530AS and 140MXC-560AS) to produce dissimilar coatings, making it more difficult to optimize the process, whose problem lies in the parameterization of the arc-beam thermal imaging equipment. In the first phase of the project, a Taguchi L9 (34-2) model (fractional factorial orthogonal arrangement) was used to produce the coatings, taking into account the projection parameters of the equipment such as current (A), voltage (V) Primary air pressure (Pp) and secondary air pressure (Ps), which were considered as input variables or experiments for the optimization process. Subsequently the coatings were characterized by techniques such as Scanning Electron Microscopy (SEM) and microhardness to take these data as attributes or output of results in order to obtain the minimization of the size of the projected particles (corrosion) and the microhardness maximization of the coatings (wear). Symbolic regression was used as a technique for obtaining the mathematical models (objective functions), which was done through the "Eureqa Formulize-Desktop" program, because it is considered very complex the modeling of all input variables by conventional mathematical methods. The adaptation of the NSGA-II Multi-Objective Genetic Algorithm was performed through a structured programming in "Matlab", being able to verify that the optimal Pareto fronts obtained in the runs with this Algorithm meet the requirements of the objective functions which are related with the attributes of the selected coatings.
1 December 2016 in Avances Investigación en Ingeniería
In this research, it was studied the influence on mechanical properties of AISI-SAE 1045 steel with heat treatment quenching at intercritical temperature of 760° C for 30 minutes and tempering at 400° C, during 10 minutes, 20 minutes and 30 minutes. The number of samples used for this work obtained by the variance curves method. The results of this study was conducted using comparing the test data of material delivery status vs treatments made. The tests were hardness with GNEHM 160 RODI durometer, conventional optical metallography with the optical metallographic inverted ZEISS Axio Observer.Z1m microscope, tension with SHIMADZU UH50 universal testing machine and Charpy impact with SATEC SYSTEMS, INC. Model No. SI-1A machine. As results of these treatments, tempered martensite was evident microstructural level in the three tempering temperatures used and an increase in hardness and tensile strength and a decrease in fragility to this steel.