Victor H. Poblete

Dr. Victor H. Poblete


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 April 2025 in Water
Verified
Journal Article
Open access
PDF file
MHMarco Antonio Díaz Huenchuan
Marco Antonio Díaz Huenchuan
DBDavid Blanco
David Blanco
RCROSA CHANDIA-JAURE
ROSA CHANDIA-JAURE
Andrés Cataldo-CunichAndrés Cataldo-Cunich
Andrés Cataldo-Cunich
VPVictor H. Poblete
Victor H. Poblete
Mª Belén Almendro-CandelMª Belén Almendro-Candel
Mª Belén Almendro-Candel
The effectiveness of ozone (O3) in eliminating various types of microorganisms, as well as in oxidizing a wide range of contaminants present in wastewater, and drinking water, is extensively documented in the literature, along with the required concentrations, contact times (Ct values), reaction mechanisms for different pollutants, and overall efficiency. This article presents a comprehensive review on the use of aqueous O3 for treatment and disinfection, specifically for low-contaminant domestic greywater (LGW), providing information for its integration into the design of small-scale treatment systems. Additionally, to complement the theoretical findings, experimental tests were conducted using a portable O3 generator in an operational facility treating greywater (GW) from handwashing sinks. The results confirmed that O3 concentration increases over time but decreases as the volume of water to be treated increases. Water analysis results showed significant reductions in BOD5, turbidity, and total suspended solids after treatment. Furthermore, the results demonstrated that the presence of microorganisms in LGW is minimal, as in the case of fecal coliforms, ensuring a 1 Log disinfection level in this type of system. O3, as the sole treatment and disinfection system, with an oxidation potential nearly twice that of chlorine, proved to be highly effective in small-scale treatment systems, promoting sustainable practices, water resource conservation, environmental protection, and public health.

21 February 2023 in Crystals
Verified
Journal Article
Open access
PDF file
VPVictor H. Poblete
Victor H. Poblete
MAMariela P. Alvarez
Mariela P. Alvarez
The mechanical, electrical, and glass transition behaviors (Tg) of polymethylmethacrylate (PMMA)–metal systems have been studied. Considering both the particle size and the metal filler concentration, the electrical conductivity showed a clear dependence on the sample thickness to reach percolation. An increase of up to 400% of strain-to-failure for the 2% v/v of nanometric filler composites in the mechanical test was observed. Tg analysis showed a decrease in the glass transition temperature when the increase of nanometric metallic filler reached the limit of 2% v/v. Over this concentration, the Tg values showed a tendency to reach the original value of the polymeric matrix without conductive filler. For the 20% v/v micrometric filler composites, the strain-to-failure increased up to 58%, but in the Tg analysis of this composite, no relevant changes were observed when the micrometric metallic filler was increased.

27 September 2025 in Crystals
Verified
Journal Article
Open access
PDF file
DADhanunjay Kumar Ammisetti
Dhanunjay Kumar Ammisetti
SKSatya Sai Harish Kruthiventi
Satya Sai Harish Kruthiventi
KAKrishna Prakash Arunachalam
Krishna Prakash Arunachalam
VPVictor H. Poblete
Victor H. Poblete
RKRavi Kumar Kottala
Ravi Kumar Kottala
SPSrinivasa Rao P
Srinivasa Rao P
Magnesium alloys, like AZ31, possess a desirable low weight and high specific strength, which make them favorable for aerospace and auto applications, yet their difficulty to machine limits their broader implementation for the industry. Electrical discharge machining (EDM) is an effective technology for machining difficult-to-machine materials, particularly when the materials are reinforced with ceramic and graphene-based fillers. This study examines the impact of reinforcement percentage (R) and different electrical discharge machining (EDM) parameters such as current (I), pulse on time (Ton) and pulse off time (Toff) on the material removal rate (MRR) and surface roughness (SR) of AZ31/B4C/GNPs composites. The combined reinforcement range varies from 2 wt.% to 4 wt.%. The Taguchi design (L27) is utilized to conduct the experiments in this study. ANOVA of the experimental data indicated that current (I) significantly affects MRR and SR, exhibiting the greatest contribution of 44.93% and 51.39% on MRR and SR, respectively, among the variables analyzed. The surface integrity properties of EDMed surfaces are examined using SEM under both higher and lower material removal rate settings. Diverse machine learning techniques, including linear regression (LR), polynomial regression (PR), Random Forest (RF), and Gradient Boost Regression (GBR), are employed to construct an efficient predictive model for outcome estimation. The built models are trained and evaluated using 80% and 20% of the total data points, respectively. Statistical measures (MSE, RMSE, and R2) are utilized to evaluate the performance of the models. Among all the developed models, GBR exhibited superior performance in predicting MRR and SR, achieving high accuracy (exceeding 92%) and lower error rates compared to the other models evaluated in this work. This work demonstrated the synergy between techniques in optimizing EDM performance for hybrid composites using a statistical design and machine learning strategies that will facilitate greater use of hybrid composites in high-precision engineering applications and advanced manufacturing sectors.