Changyu Sun

Dr. Changyu Sun


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2019 in Metals
Verified
Journal Article
Open access
PDF file
TLTingle Li
Tingle Li
CSChangyu Sun
Changyu Sun
SSSunny Song
Sunny Song
QWQi Wang
Qi Wang
In view of the fact that Ti–bearing blast furnace primary slag has been explored limitedly and its viscosity–structural property is not fully understood, the phase compositions, viscosity and structure of CaO–8%MgO–Al2O3–SiO2–TiO2–5%FeO slag are investigated by X-ray diffractometer, rotating cylinder method, Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy respectively, considering the effect of Al2O3 and TiO2. The critical temperature that is defined as the temperature below which the viscosity of slag increases quickly, could be explained by the relative amount of perovskite to melilite from phase compositions analysis. The slag viscosity first increases with increasing Al2O3 content from 10 to 15 mass%, and then decreases with the further increase of Al2O3 to 18 mass%. Increasing TiO2 content continuously lowers the viscosity. FTIR and Raman spectra results show that increasing Al2O3 or decreasing TiO2 content leads to complex Si–O and Ti–O networks structure, corresponding to the slag viscosity variation. The effect of weak linkages of Si–O–Al is more dominant when Al2O3exceeds 15 mass%, which results in the decrease of viscosity.

24 March 2023 in Materials
Verified
Journal Article
Open access
PDF file
WZWenbo Zhou
Wenbo Zhou
TLTingle Li
Tingle Li
DLDong Lan
Dong Lan
CSChangyu Sun
Changyu Sun
SYSongtao Yang
Songtao Yang
The viscosity of high-titanium blast furnace slag with different TiO2 content, Al2O3 content, and basicity was measured at 1653–1773 K using the rotational cylinder method. The phase composition of the slag is measured by XRD. Phase diagram of the slags is calculated by FactSage software. Ionic network structure of the slags is analyzed by FT–IR. Results show that TiO2 depolymerizes the silicate network structure, reducing viscosity at high temperature, while increasing Al2O3 content generates a more complicated silicate, increasing viscosity. Basicity affects viscosity, with higher basicity resulting in lower viscosity above 1733 K. Perovskite significantly affects the viscosity of slag. This study provides an in-depth understanding of the relationship between the composition and viscosity of high-titanium blast furnace slag, which is very important for improving production efficiency.

15 February 2019 in ISIJ International
Verified
Journal Article
Open access
PDF file
TLTingle Li
Tingle Li
CSChangyu Sun
Changyu Sun
DLDong Lan
Dong Lan
JSJian Song
Jian Song
SSSunny Song
Sunny Song
QWQi Wang
Qi Wang
The mineral elements migration behaviours of Ti–bearing high basicity sinter during softening–melting process, as well as its effect on softening–melting properties, are studied using scanning electron microscope and X–ray diffractometer. We can conclude that both MgO and Al2O3 content increase while TiO2 content increases first and decreases later overall in the slag phase from the original state to melting end. At softening stage, some perovskite dissolves into the slag phase and part of TiO2 and MgO in wustite phase transfer into the slag phase. The low melting temperature of the slag phase is the main factor for the low softening temperatures of Ti–bearing sinter. At melting stage, TiO2 in the slag phase is tiny and changes little. The low liquidus temperature and viscosity of the slag phase result in the low melting start temperature of Ti–bearing sinter. The slag phase melts great earlier than metallic iron while the unfused sponge iron still bounds large amounts of perovskite crystals. And then, iron collapses and releases the restrained crystals at a higher temperature, resulting in the second rise of pressure drop.

8 August 2019 in Metals
Verified
Journal Article
Open access
PDF file
TLTingle Li
Tingle Li
CSChangyu Sun
Changyu Sun
SSSunny Song
Sunny Song
QWQi Wang
Qi Wang
This research provides fundamental insight into the roles of MgO and Al2O3 on the viscous and structural behaviors of CaO−SiO2−MgO−Al2O3−10 mass% TiO2−5 mass% FeO (CaO/SiO2 = 1.3) system primary blast furnace slag. The slag viscosity is measured by the rotating cylinder method, which is essential to the efficient and stable operation of a blast furnace. The network structure characterization of the quenched vitreous samples was conducted using Fourier Transformation Infrared (FTIR) and Raman spectroscopy. Usual viscous behaviors (that the slag viscosity and the activation energy decrease or increase with increasing MgO or Al2O3 content) were observed, corresponding to changes in the network structure certified by FTIR and Raman analyses. It seems that the addition of MgO and Al2O3 prefers to modify the Si−O and Ti−O network in the present slag. When the slag composition reaches 10% MgO and 12% Al2O3, unexpected viscous behaviors (that MgO increases viscosity and Al2O3 decreases viscosity) are discovered. The roles of MgO and Al2O3 could be interpreted by changes in the arrangement structure of ions in liquid, corresponding to changes in the primary equilibrium phase region determined in phase diagrams and variation in the difference between the experimental and liquidus temperature, respectively.

17 June 2022 in Journal of Iron and Steel Research International
Verified
Journal Article
Closed access
PDF file
FMFan-Jian Meng
Fan-Jian Meng
CSChangyu Sun
Changyu Sun
TLTing-Le Li
Ting-Le Li
QWQi Wang
Qi Wang

6 August 2023 in Materials
Verified
Journal Article
Open access
PDF file
ZLZhexi Li
Zhexi Li
TLTingle Li
Tingle Li
CSChangyu Sun
Changyu Sun
SYSongtao Yang
Songtao Yang
QWQi Wang
Qi Wang
The softening–melting properties of mixed ferrous burden made from high-basicity sinter with increased MgO and Al2O3 content and acid pellets was investigated for optimization. The influences of MgO and Al2O3 are discussed with the aid of phase analysis. The results showed that, with decreasing MgO mass%/Al2O3 mass% in mixed burden, all the softening–melting characteristic temperatures decreased, which can be attributed to the low melting temperature and viscosity of the slag caused by MgO and Al2O3. The permeability of the melting zone deteriorated again when MgO mass%/Al2O3 mass% decreased to a certain content. The softening interval widened slightly at first and then narrowed, while the melting interval first increased slightly and then increased greatly later. It can be deduced that the softening properties were improved, but the melting properties were worsened. Under comprehensive consideration of its softening–melting properties, permeability, iron ore reduction and the thermal state of the blast furnace hearth, the optimal softening–melting properties of a mixed ferrous burden with MgO mass%/Al2O3 mass% of 0.82 is optimal.