Tingle Li

Dr. Tingle Li


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2019 in Metals
Verified
Journal Article
Open access
PDF file
TLTingle Li
Tingle Li
CSChangyu Sun
Changyu Sun
SSSunny Song
Sunny Song
QWQi Wang
Qi Wang
In view of the fact that Ti–bearing blast furnace primary slag has been explored limitedly and its viscosity–structural property is not fully understood, the phase compositions, viscosity and structure of CaO–8%MgO–Al2O3–SiO2–TiO2–5%FeO slag are investigated by X-ray diffractometer, rotating cylinder method, Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy respectively, considering the effect of Al2O3 and TiO2. The critical temperature that is defined as the temperature below which the viscosity of slag increases quickly, could be explained by the relative amount of perovskite to melilite from phase compositions analysis. The slag viscosity first increases with increasing Al2O3 content from 10 to 15 mass%, and then decreases with the further increase of Al2O3 to 18 mass%. Increasing TiO2 content continuously lowers the viscosity. FTIR and Raman spectra results show that increasing Al2O3 or decreasing TiO2 content leads to complex Si–O and Ti–O networks structure, corresponding to the slag viscosity variation. The effect of weak linkages of Si–O–Al is more dominant when Al2O3exceeds 15 mass%, which results in the decrease of viscosity.

13 October 2023 in Fuel
Verified
Journal Article
Closed access
MWMingxin Wu
Mingxin Wu
ZLZhexi Li
Zhexi Li
JHJunchen Huang
Junchen Huang
QWQi Wang
Qi Wang
TLTingle Li
Tingle Li
YJYongqiang Jiang
Yongqiang Jiang

8 August 2019 in Metals
Verified
Journal Article
Open access
PDF file
TLTingle Li
Tingle Li
CSChangyu Sun
Changyu Sun
SSSunny Song
Sunny Song
QWQi Wang
Qi Wang
This research provides fundamental insight into the roles of MgO and Al2O3 on the viscous and structural behaviors of CaO−SiO2−MgO−Al2O3−10 mass% TiO2−5 mass% FeO (CaO/SiO2 = 1.3) system primary blast furnace slag. The slag viscosity is measured by the rotating cylinder method, which is essential to the efficient and stable operation of a blast furnace. The network structure characterization of the quenched vitreous samples was conducted using Fourier Transformation Infrared (FTIR) and Raman spectroscopy. Usual viscous behaviors (that the slag viscosity and the activation energy decrease or increase with increasing MgO or Al2O3 content) were observed, corresponding to changes in the network structure certified by FTIR and Raman analyses. It seems that the addition of MgO and Al2O3 prefers to modify the Si−O and Ti−O network in the present slag. When the slag composition reaches 10% MgO and 12% Al2O3, unexpected viscous behaviors (that MgO increases viscosity and Al2O3 decreases viscosity) are discovered. The roles of MgO and Al2O3 could be interpreted by changes in the arrangement structure of ions in liquid, corresponding to changes in the primary equilibrium phase region determined in phase diagrams and variation in the difference between the experimental and liquidus temperature, respectively.

6 August 2023 in Materials
Verified
Journal Article
Open access
PDF file
ZLZhexi Li
Zhexi Li
TLTingle Li
Tingle Li
CSChangyu Sun
Changyu Sun
SYSongtao Yang
Songtao Yang
QWQi Wang
Qi Wang
The softening–melting properties of mixed ferrous burden made from high-basicity sinter with increased MgO and Al2O3 content and acid pellets was investigated for optimization. The influences of MgO and Al2O3 are discussed with the aid of phase analysis. The results showed that, with decreasing MgO mass%/Al2O3 mass% in mixed burden, all the softening–melting characteristic temperatures decreased, which can be attributed to the low melting temperature and viscosity of the slag caused by MgO and Al2O3. The permeability of the melting zone deteriorated again when MgO mass%/Al2O3 mass% decreased to a certain content. The softening interval widened slightly at first and then narrowed, while the melting interval first increased slightly and then increased greatly later. It can be deduced that the softening properties were improved, but the melting properties were worsened. Under comprehensive consideration of its softening–melting properties, permeability, iron ore reduction and the thermal state of the blast furnace hearth, the optimal softening–melting properties of a mixed ferrous burden with MgO mass%/Al2O3 mass% of 0.82 is optimal.

8 October 2026 in ACS Omega
Verified
Journal Article
Open access
MWMingxin Wu
Mingxin Wu
JLJinbo Li
Jinbo Li
TLTingle Li
Tingle Li
QWQi Wang
Qi Wang
LXLiangping Xu
Liangping Xu
TJTao Jiang
Tao Jiang
The efficiency of blast furnace (BF) ironmaking, a predominant method for pig iron production, is profoundly influenced by the reduction-contraction behavior and melting reduction mechanism of iron ore within the cohesive zone. These factors are critical for optimizing BF operations and energy utilization, yet remain incompletely understood, particularly under ore-coke coupling conditions. This study introduces a novel methodology to investigate the complex interactions between iron ore and coke, focusing on oxygen and carbon transfer during high-temperature reduction processes. Results demonstrate that the contraction rate of the iron ore layer is positively correlated with the direct reduction rate prior to melting, whereas inversely related trends emerge during the melting process. Postmelting, the contraction rate is governed by the dripping behavior of slag and molten iron permeating through the coke layer. The melting reduction mechanism is delineated into two distinct stages: the initial stage involves direct reaction between FeO and coke, while the subsequent stage is characterized by carbon monoxide production from the reaction of coke with CO2, which subsequently permeates into the iron layer, establishing a gas film (CO and CO2) at the coke-iron interface. This research provides fundamental insights into the thermal behavior and modeling of iron ore reduction and melting in BFs, offering a robust theoretical foundation for enhancing iron ore and coke utilization efficiency while reducing carbon emissions.

10 May 2022 in arXiv
Verified
Preprint
Open access
PDF file
TLTingle Li
Tingle Li
YLYichen Liu
Yichen Liu
AOAndrew Owens
Andrew Owens
HZHang Zhao
Hang Zhao
From the patter of rain to the crunch of snow, the sounds we hear often convey the visual textures that appear within a scene. In this paper, we present a method for learning visual styles from unlabeled audio-visual data. Our model learns to manipulate the texture of a scene to match a sound, a problem we term audio-driven image stylization. Given a dataset of paired audio-visual data, we learn to modify input images such that, after manipulation, they are more likely to co-occur with a given input sound. In quantitative and qualitative evaluations, our sound-based model outperforms label-based approaches. We also show that audio can be an intuitive representation for manipulating images, as adjusting a sound's volume or mixing two sounds together results in predictable changes to visual style. Project webpage: https://tinglok.netlify.app/files/avstyle