The corrosion inhibition of Luffa cylindrica Leaf Extract (LCLE) was investigated using gravimetric, depth of attack and surface analysis techniques. Effect of inhibitor concentrations (0.50-1.00 g/l), temperatures (30-60 °C) and immersion time (4-12 h) was studied on the Inhibition Efficiency (IE) of the extract on Mild Steel (MS) immersed in a 0.5 M HCl solution. The constituents of the proposed inhibitor were identified by using a GC-MS. The media solutions and adsorbed film on MS were characterized using FTIR Spectrophotometer. SEM microgram and surface tester were applied for studying surface morphology and depth of attack profile. The optimum IE of 87.89% was obtained. The LCLE adsorption on MS followed Langmuir isotherm and pseudo-second-order adsorption kinetics. Activation energy (28.71 kJ/mol), entropy (- 0.15 kJ/mol. K), average enthalpy (-28.00 kJ/mol) and Gibbs free energy (-11.43 kJ/mol) obtained at optimum condition indicate exothermic process and physical adsorption mechanism. The result obtained in this study compared well with many reported green inhibitors for MS corrosion.
1 September 2020 in Bioresource Technology Reports
Modified Palm Kernel Shell Activated Carbon (PKSAC) using silver nanoparticle (Ag-NPs-PKSAC) was investigated on phenol uptake from aqueous solution. Effects of temperature (500–700 °C), time (90–120 min), and alkaline concentration (0.1–0.5 M) were studied on the yield and methylene blue numbers for the synthesis. Effects of initial concentration (100–200 mg/L), agitation (150–250 rpm), contact time (30–120 min), and adsorbent dosage (0.15–0.25 g) were studied in a batch experiment on percentage removal of phenol. The PKS, char, PKSAC and Ag-NPs-PKSAC were characterized using BET, FTIR, SEM, and proximate analyses. The synthesis of PKSAC was optimum at 608 °C, 0.5 M KOH, and carbonization holding time of 60 min. The optimum phenol uptake was 85.64, 90.29 and 91.70% for PKSAC, Ag-NPs-PKSAC, and commercial adsorbent, respectively. The adsorption mechanism of phenol followed the Langmuir isotherm and best described as physio-sorption with pseudo-second-order kinetics. Phenol exhibits high affinity (ΔS° = 0.0079 kJ/mol K) for Ag-NPs-PKSAC with favorable adsorption (ΔG° = -1.551 kJ/mol) at high temperature due to endothermic (ΔH° = 1.072 kJ/mol) nature of the system. The result obtained in this study compared favorably with the literature.
14 July 2022 in Environmental Research, Engineering and Management
The use of commercial activated carbon (AC) to remove organic micropollutants from aqueous solution is expensive and unsustainable. In this study, coconut shell activated carbon (CSAC) was synthesized and applied for the removal of ibuprofen, ketoprofen and naproxen from aqueous solutions. The effects of carbonization and acid activation on the CSAC were studied using Fourier-transform infrared spectroscopy, scanning electron microscope, proximate and ultimate analyses. The influence of initial concentration (200–1000 mg/L), contact time (10–200 min), and temperature (30–60°C) was also investigated. The adsorptive capacity of CSAC for various pollutants was found to increase with concentration up to 150 min. Ibuprofen, ketoprofen and naproxen removal obeyed Langmuir (R2 = 0.9978), Temkin (R2 = 0.9551) and Freundlich (R2 = 0.9879) isotherm, respectively. The kinetic data obtained for various pollutants are best described by the pseudo-first-order model with correlation coefficient values in the range 0.96–0.99. The free energy ( G) values ranged between 1.0 and 9.0 kJ/mol for all the pollutants investigated. The mechanism of adsorption is physical, endothermic, and non-spontaneous. This study shows that CSAC is an effective alternative adsorbent for sequestering mixture of organic pollutants from aqueous solution.
21 June 2018 in Chemical Engineering Communications
Biocorrosion inhibition of mild steel in the crude oil-water environment was investigated in the absence and presence of Carica papaya peel extract, Musa paradisiaca peel extract, and Moringa oleifera leaf extract as potential biocidal-green inhibitors using gravimetric, polarization, and surface analysis (Inverted metallurgical microscope and Fourier transform infra-red spectroscopy) methods. Kinetics and adsorption behaviors of the extracts were determined and evaluated. Results revealed that each of the extracts functioned as biocidal-green inhibitors in the crude oil-water environment and that biocorrosion inhibition efficiency (IE%) of each extract increased with increase in extract concentration and exposure time. Maximum IE% of 97.7, 96.5, and 99.2% was achieved with Musa paradisiaca peel extract, Moringa oleifera leaf extract, and Carica papaya peel extract, respectively, at 4000 mg/l extract concentration and 35 d exposure time. Polarization studies indicated that each of the extracts acts as a mixed-type inhibitor. Mild steel susceptibility to biocorrosion was significantly reduced by each of the extracts through biofilm development suppression and extract adsorption onto the mild steel surface which obeyed Langmuir, Freundlich, Temkin, and Flory-Huggins isotherm models. Kinetics of mild steel biocorrosion inhibition followed a Monod form of kinetics (Type A). Gibbs free energy of adsorption values for Musa paradisiaca peel extract (−9.65 kJ/mol), Moringa oleifera leaf extract (−9.57 kJ/mol), and Carica papaya peel extract (−9.71 kJ/mol) showed that each extract adsorption was spontaneous and of physical adsorption.
One of the major obstacles to Nigeria's techno-economic development has been a lack of good road infrastructure. Despite a large deposit of natural bitumen in the form of semi-liquid and bitumen sand, the reliance on imported bitumen/asphalt for road construction and maintenance in Nigeria has reduced road coverage and quality. To use local bitumen as a binder in pavement construction, an efficient upgrading process is required using polymers, nanomaterials, and other chemical additives. However, the selection of an appropriate modifier depends on many factors including the origin, elemental and chemical composition of bitumen. This review presents vital properties of Nigerian bitumen extracted from oil wells and tar sands with the view to identifying potential additives as solutions for its upgrading. Based on predefined selection criteria, we conducted a systematic review of the literature. We gathered information on the current state of knowledge about the major issues encountered during the polymeric modification of bitumen. In addition, data on existing practices used by various road researchers to address such issues was gathered. Effort was made to review waste packaging polymers and plastics for possible utilization to ensure sustainable pavement infrastructure in Nigeria. The results of this review showed relatively little information on Nigerian bitumen upgrading. Many authors have investigated different polymer additives on asphaltic bitumen sourced from different countries and the results has pointed to the capability of polymeric modification to improve some of the properties of bitumen. A knowledge gap however, exists in the optimization of polymer dosage, and characterization of bitumen at the SARA level to aid the understanding of the effects of polymeric modification and mechanisms involved during the pavement degradation. Additionally, it has been challenging to generalize the effects of different polymers due to the variation of bitumen properties from different sources. This review identifies the potential for upgrading Nigerian bitumen using polymer additives, the potential of waste plastics, crumb rubbers, and packaging waste materials as alternative and sustainable additives also highlighted.