Teleoperation technology combines the strength and accuracy of robots with the perception and cognition abilities of human experts, allowing the robots to work as an avatar of the operator in dangerous environments. The motion compatibility and intuitiveness of the human–machine interface directly affect the quality of teleoperation. However, many motion capture methods require special working environments or need bulky mechanisms. In this research, we proposed a wearable, lightweight, and passive upper limb exoskeleton, which takes intuitiveness and human-machine compatibility as a major concern. The upper limb pose estimation and teleoperation mapping control methods based on the exoskeleton are also discussed. Experimental results showed that by the help of the upper limb exoskeleton, people can achieve most areas of the normal range of motion. The proposed mapping control methods were verified on a 14-DOF anthropomorphic manipulator and showed good performance in teleoperation tasks.
9 March 2026 in IEEE Transactions on Instrumentation and Measurement
Conventional surface topography measurement methods often face challenges in simultaneously achieving high accuracy and field deployability, particularly for in-situ inspection of installed or large mechanical components. This article presents an autonomous measurement approach that integrates a compact mobile robot with a laser tracker to perform high-precision surface topography acquisition directly in workshop environments. The system adopts a dual-architecture design, employing an HTC VIVE system for 6-DOF closed-loop navigation and a single Spherically Mounted Reflector (SMR) for metrological data acquisition. The platform is actuated by three piezoelectric ultrasonic motors, enabling smooth, omnidirectional motion with minimal mechanical backlash. Experimental validation on a granite reference artifact demonstrates a trajectory tracking RMSE of 0.78 mm and a vertical surface measurement uncertainty of 8.4 μm. Long-term repeatability is verified through scanning experiments conducted over eight consecutive days, confirming stable performance under practical environmental conditions. The results indicate that the proposed system provides a portable and autonomous solution for surface topography measurement in flexible in-situ scenarios.
Morphology and texture detection, which are important components of tactile sensing, augment the response of human beings to external stimuli. Similarly, tactile sensing-based information acquisition systems in robots can help enhance the interactions of robots with the surroundings. The main drawback of morphology and texture sensing methods is their inability to explain and quantify sensing information, which makes it difficult to utilize prior knowledge and necessitates a new training process to fit the new task, even if the changes between the existing and new tasks are minuscule. Another drawback is its dependence on large datasets. To solve these problems, a hybrid connectionist symbolic model (HCSM) is proposed herein that combines historic symbolic knowledge and end-to-end neural networks. The symbolic model requires a smaller dataset and possesses an improved transferability of detection. Neural networks can be easily established and exhibit better fault tolerance for non-ideal samples. The HCSM model combines these advantages. Experiments with the tactile-based morphology and texture detection demonstrated that the new method can transfer the detection ability to fit new tasks without requiring additional retraining and has a 16% higher recognition precision than a convolutional neural network, LeNet, AlexNet, VGG16, and ResNet. The HCSM method with these features can broaden the range of applications of tactile sensing.
1 January 2026 in IEEE Open Journal of Nanotechnology