A novel swing control scheme combining optimization and input-shaping techniques is proposed for overhead cranes subjected to parameter variations and modeling errors. An input shaper was first designed using the analytical method based on the linear swing dynamic model. Then, the particle swarm optimization algorithm was used to optimize the pulse amplitudes and time of the shaper to reduce the influence of modeling errors on the residual vibration. Furthermore, an adaptive optimization method was also used to optimize the parameters of the shaper to suppress the influence of the change in the payload mass and the rope length on the residual vibration. The proposed control scheme can suppress the influence of uncertainties on residual vibration and improve the anti-disturbance ability of a closed-loop system via offline and online dual optimization. Finally, the simulation results verify the effectiveness of the scheme.
The novel extreme learning machine (ELM) neural network disturbance observer (NNDO) -based sliding mode control (SMC) strategy is proposed for the precise tracking control of a hypersonic vehicle (HV) under various disturbance situations. By converting nonlinear dynamics into state-dependent linear model, the control law design process is simplified, and the sliding mode control law based on the power function reaching rate is designed to suppress the chattering effect. Considering the disturbances, the ELM-NNDO is designed based on the single-hidden layer feedforward network (SLFN). Different from conventional ELM using least square optimization approach, the output weight here is updated based on the Lyapunov synthesis approach. In addition, the influences of the disturbances on the velocity and altitude are attenuated by the direct feedback compensation (DFC), and the offset-free tracking control is realized for the output reference signal. Comparison of simulation results verify the superior control performance of the proposed method.
A novel dynamic inverse control method based on a dynamical neural network (DNN) is proposed for the trajectory tracking control of a flexible air-breathing hypersonic vehicle (FAHV). Firstly, considering that the accurate model of FAHV is difficult to obtain, the FAHV is regarded as a completely unknown system, and a DNN is designed to identify its nonlinear model. On the basis of Lyapunov’s second law, the weight vectors of the DNN are adaptively updated. Then, a dynamic inverse controller is designed based on the identification model, which avoids the transformation of the nonlinear model of FAHV, thereby simplifying the controller design process. The simulation results verify that the DNN can identify FAHV accurately, and velocity and altitude can track the given reference signal accurately with the proposed dynamic inverse control method. Compared with the back-stepping control method, the proposed method has better tracking accuracy, and the amplitude of the initial control law is smaller.