A novel tracking control strategy is proposed for a hypersonic vehicle based on model predictive control and the extended linearisation method. Unlike the general linearisation techniques, the state‐dependent coefficient parameterisation method is used to establish a linear structure of non‐linear dynamics. Based on the acquired linear system, two predictive controllers are designed for the velocity and altitude tracking in the presence of constraints. Compared with the conventional model predictive control which consumes a large amount of computer resources due to the online constrained optimisation, the predictive functional control adopts the heuristic approach to deal with constraints hence suiting fast systems more. Simulation results show the designed controllers not only meet constraint requirements but also ensure the fast response and tracking performance, and the resulting closed‐loop system is robust with respect to the parameter variations and external disturbances.
A novel swing control scheme combining optimization and input-shaping techniques is proposed for overhead cranes subjected to parameter variations and modeling errors. An input shaper was first designed using the analytical method based on the linear swing dynamic model. Then, the particle swarm optimization algorithm was used to optimize the pulse amplitudes and time of the shaper to reduce the influence of modeling errors on the residual vibration. Furthermore, an adaptive optimization method was also used to optimize the parameters of the shaper to suppress the influence of the change in the payload mass and the rope length on the residual vibration. The proposed control scheme can suppress the influence of uncertainties on residual vibration and improve the anti-disturbance ability of a closed-loop system via offline and online dual optimization. Finally, the simulation results verify the effectiveness of the scheme.
23 March 2023 in Systems Science & Control Engineering
An input shaper-based model predictive control scheme is proposed for an overhead crane to suppress the swing of the payload. A control-oriented mathematical model of the crane is firstly derived based on the small angle hypothesis. Furthermore, three kinds of commonly used shapers are discussed and a zero vibration derivative shaper is selected for the crane. Then, a model predictive swing suppression controller is designed for the crane based on the selected shaper. Constraints on the control input and its slew rate are respected. Besides, the constraint on the swing angle of the payload is also respected as an output constraint. The constrained solution is given in the form of standard quadratic programming. The designed control scheme combines open-loop and closed-loop control techniques, achieving accurate positioning of the trolley and good swing suppression of the payload. A series of simulation demonstrates the effectiveness and advantages of the proposed scheme.
7 March 2024 in International Journal of Dynamics and Control
A novel dynamic inverse control method based on a dynamical neural network (DNN) is proposed for the trajectory tracking control of a flexible air-breathing hypersonic vehicle (FAHV). Firstly, considering that the accurate model of FAHV is difficult to obtain, the FAHV is regarded as a completely unknown system, and a DNN is designed to identify its nonlinear model. On the basis of Lyapunov’s second law, the weight vectors of the DNN are adaptively updated. Then, a dynamic inverse controller is designed based on the identification model, which avoids the transformation of the nonlinear model of FAHV, thereby simplifying the controller design process. The simulation results verify that the DNN can identify FAHV accurately, and velocity and altitude can track the given reference signal accurately with the proposed dynamic inverse control method. Compared with the back-stepping control method, the proposed method has better tracking accuracy, and the amplitude of the initial control law is smaller.