In this paper, we investigate the granularity in the free layer of the magnetic tunnel junctions (MTJ) and its potential to function as a reservoir for reservoir computing where grains act as oscillatory neurons while the device is in the vortex state. The input of the reservoir is applied in the form of a magnetic field which can pin the vortex core into different grains of the device in the magnetic vortex state. The oscillation frequency and MTJ resistance vary across different grains in a non-linear fashion making them great candidates to be served as the reservoir's outputs for classification objectives. Hence, we propose an experimentally validated area-efficient single granular vortex spin-torque nano oscillator (GV-STNO) device in which pinning sites work as random reservoirs that can emulate neuronal functions. We harness the nonlinear oscillation frequency and resistance exhibited by the vortex core granular pinning of the GV-STNO reservoir computing system to demonstrate waveform classification.
9 December 2019 in IEEE Transactions on Electron Devices
Magnetic tunnel junction (MTJ) has emerged as a viable candidate for next-generation memory and logic applications. Manipulation of the magnetic and electric field can control the spin and charge state variables that are of utmost importance in spintronics devices. In this article, the modeling of voltage-controlled spin–orbit torque (VCSOT)-based magnetic random access memory (MRAM) is demonstrated. VCSOT MRAM is an ultrafast device owing to a magnetic switching time of 0.7 ns. It is more energy-efficient as compared to spin–orbit torque (SOT) MRAM. VCSOT MRAM has been exemplified for multilevel cell (MLC) application to enhance the memory integration density. Two-bit serial MLC (sMLC) and parallel MLC (pMLC) designs are proposed using VCSOT MRAM. These MLCs are more energy-efficient as compared to SOT-MLCs. Moreover, 2-bit sMLC and pMLC VCSOT-MRAM significantly reduce average write energy by 91.5% and 49.6%, respectively, as compared to SOT-based MLC. Performance metrics for these devices have been illustrated, which shows the negligible read disturbance and write error rates.
24 March 2020 in IEEE Transactions on Electron Devices
Conventional von Neumann architecture suffers from data trafficking and power hungriness between memory and processing units. Recent architectures escalating to overcome these limitations are near-memory architecture (NMA) and computing-in-memory (CiM) architecture (CMA). Spintronics-based devices, such as spin-transfer torque magnetic memory (STTM), spin-orbit torque magnetic memory (SOTM), differential spin Hall-effect-based magnetic memory (DSHEM), and multilevel voltage-controlled SOT-based magnetic memory (MV-SOTM) are a few promising contenders for post-CMOS technology. MV-SOTM spin device is used in this study to showcase the CMA to perform basic logic operations namely and/ nand, or/ nor, and xor/ xnor within the memory array. Furthermore, magnetic full adder (MFA) is implemented using CMA in MV-SOTM array. The performance of CMA design for MV-SOTM-based MFA is compared with SOTM-based MFA. The proposed CiM design for MV-SOTM-based MFA shows 29.2% and 12.22% performance improvement in terms of write energy and logic power, respectively. Moreover, up to 34% area reduction is achieved in comparison to SOTM-based CiM MFA.
4 December 2020 in IEEE Transactions on Electron Devices
Artificial intelligence has been demonstrated for numerous applications including image recognition and processing, internet-of-things (IoT), and speech recognition. Recent neural network (NN) architectures escalating to perform these functionalities require deep-learning and deep NN (DNN) implementation. However, the present algorithm and circuit of DNN suffer from area and energy-efficiency. The usage of an energy-efficient and cost-effective binary NN (BNN) can mitigate the performance bottleneck. The basic component of BNN (the XNOR and accumulate module) is capable of replacing the conventional multiply-and-accumulate (MAC) operation. Among various emerging nonvolatile memories (NVMs), spintronics-based devices are attracting attention for the implementation of the aforementioned architectures. Multilevel voltage-controlled spin-orbit torque -based magnetic memory (MV-SOTM) spin device as synapse and voltage-controlled SOTM (V-SOTM) device as spin-neuron are capable of producing an all-spin NN. This article presents advanced XNOR operation using a computing-in-memory (CiM) mechanism wherein both V-SOTM and MV-SOTM (using series and parallel configuration) based synapses are compared. The MV-SOTM design dissipates 35.51% lesser energy as compared to the 1-bit V-SOTM. Further, the 8-bit synaptic crossbar array is implemented using both the devices with two output spin-neurons. These series and parallel MV-SOTM-based synaptic arrays consume 42.22% and 45.12% lesser power, respectively, as compared to 1-bit V-SOTM based synaptic array. Furthermore, the all-spin BNN design demonstrates a handwritten digit recognition application.
Spintronics, being a burgeoning area of research, aims to incorporate magnetic tunnel junction (MTJ), as a basic storage building block, to various electronic applications. In continuation of many device structure using MTJ such as spin-transfer torque (STT)-MTJ, spin Hall effect (SHE)-MTJ, spin-orbit torque (SOT)-MTJ, domain wall-based MTJ, and complementary polarizer MTJ, this paper presents a differential spin Hall effect (DSHE). The working and operational analysis of the DSHE-based memory element is presented. It provides 50% improved write energy and more than 1.5 times faster read as compared to a single-ended SHE-MTJ. The device structure is well suited for various differential circuit applications, for example, nonvolatile static random access memory (NVSRAM), nonvolatile flip flop (NVFF), magnetic full adder, and nonvolatile differential sense latch, with a fast and energy-efficient operation. In addition, DSHE-MTJ application for NVSRAM (named as DSNVM) is proposed. Performance of DSNVM is compared with the STT+SHE-based NVSRAM (named as SHENVM). DSNVM shows improved performance in terms of area overhead, restoration delay, and energy. DSNVM provides 40% faster restoration and 16.7% lesser energy as compared to SHENVM. Furthermore, a computational investigation for cell stability is depicted using butterfly curve and N-curve methods. Usually, write noise margins deteriorate in NVSRAMs due to the constituent NV cell. However, read as well as write noise margin is improved in DSNVM.
10 June 2022 in IEEE Transactions on Electron Devices
Topological spin textures are the next-generation spintronic building blocks for storing and processing information because of their controllable formation and annihilation. Memory, logic, and neuromorphic computing applications are reported using such devices having 2-D and 3-D spin textures, namely, vortex, skyrmions, localized bullet, and so on. A robust device-to-circuit-to-system level design is required for developing a neural network (NN) or a neuromorphic computing system (NCS) using these spin devices. Hence, in this work, we present a Verilog-A-based analytical model of a vortex spin-torque nano oscillator (V-STNO) for enabling circuit-level simulation. The model presented here is functional for both linear and nonlinear dynamics of the magnetic vortex core. The nonlinear dynamics show the formation and annihilation of the magnetic vortex depending on its critical currents. Furthermore, the developed model is analyzed for the nanopillar’s diameter and free layer thickness variations. Moreover, an investigation of the temperature effect on the device performance for a range of −40°C to 140 °C is carried out.