8 January 2018 in IEEE Transactions on Biomedical Circuits and Systems
This paper presents an implantable bio-impedance measurement system for cardiac pacemakers. The fully integrated system features a low power analog front-end and pulse width modulated output. The bio-impedance readout benefits from voltage to time conversion to achieve a very low power consumption for wirelessly transmitting the data outside the body. The proposed IC is fabricated in a 0.18 μm CMOS process and is capable of measuring the bio-impedance at 2 kHz over a wide dynamic range from ${\text{100}}\,\Omega $ to $\text{3.3}{\;\text{k}\Omega }$ with $\text{1.35}\;\Omega _{{\rm{rms}}}$ accuracy and ${\text{1}}\; {\mu}\text{A}$ maximum current injection while consuming just $\text{1.55}{\;{\mu}}{\text{A}}$ from a 1 V supply.
5 May 2023 in Journal of Neural Engineering
Objective. Therapeutic intervention in neurological disorders still relies heavily on pharmacological solutions, while the treatment of patients with drug resistance remains an unresolved issue. This is particularly true for patients with epilepsy, 30% of whom are refractory to medications. Implantable devices for chronic recording and electrical modulation of brain activity have proved a viable alternative in such cases. To operate, the device should detect the relevant electrographic biomarkers from local field potentials (LFPs) and determine the right time for stimulation. To enable timely interventions, the ideal device should attain biomarker detection with low latency while operating under low power consumption to prolong battery life. Approach. Here we introduce a fully-analog neuromorphic device implemented in CMOS technology for analyzing LFP signals in an in vitro model of acute ictogenesis. Neuromorphic networks have progressively gained a reputation as low-latency low-power computing systems, which makes them a promising candidate as processing core of next-generation implantable neural interfaces. Main results. The developed system can detect ictal and interictal events with ms-latency and with high precision, consuming on average 3.50 nW during the task. Significance. The work presented in this paper paves the way to a new generation of brain implantable devices for personalized closed-loop stimulation for epilepsy treatment.
6 October 2021 in Journal of Physics D: Applied Physics
Recent research provides examples of neuromorphic systems applied to process biological signals or to interface biological tissues. Usually, in such contexts, the neuromorphic system is used for automatic anomaly detection. The automation of the long-term monitoring of biological signals holds promise for lightening the burden placed on clinicians. At the same time, the adoption of such devices potentially allows processing to be performed locally, without the need to transfer data to an external processor. In turn, on-site signal analysis makes closed-loop intervention feasible, to correct the source of the anomalies. So far, the common approach has been to deploy the network of spiking neurons either on multi-core neuromorphic platforms or on programmable units (field programmable gate array). However, if the aim is to develop wearable or even chronically implantable devices, it is imperative to move in the direction of embedded solutions, tailored and optimized for the specific application. To this end, the present study proposes a neuromorphic device implemented in CMOS technology for the detection of epileptic seizures (ictal events) from local field potential (LFP) signals. The LFP data have been acquired by a multi-electrode array in a slice of mouse hippocampus-cortex. The system includes an analog-to-event converter (AEC) encoding the recorded signals into trains of spikes, and a small spiking neural network (SNN) of 2 × 1 neurons with online biological-plausible learning. The AEC yields two spike-trains: UP spikes that account for the positive slope signal and DOWN spikes that correspond to the negative slope signal. The synapses among the input and output layers are plastic and follow the spike-timing-dependent plasticity rule. Early results show that the SNN module is able to detect ictal events with a delay of 64.98 ± 30.92 ms, consuming 50 pW. The layout of the entire system occupies 528 µm × 278 µm.
15 May 2018 in IEEE Transactions on Biomedical Circuits and Systems
A low-power mixed-signal IC for implantable pacemakers is presented. The proposed system features three independent intracardiac signal readout channels with pulse-width-modulated outputs. Also, the proposed system is capable of measuring the amplitude and phase of the bioimpedance with pulse-width-modulated outputs for use in rate adaptive pacemakers. Moreover, a stimulation system is embedded, offering 16 different amplitudes from 1 to 7.8 V. A backscattering transmitter transfers the output signals outside the body with very little power consumption. The proposed low-power mixed-signal IC is fabricated in a 0.18-μm HV CMOS process and occupies 2.38 mm2. The biopotential channels extract the heart signals with 9.2 effective number of bits and the bioimpedance channels measure the amplitude and phase of the heart impedance with 1.35 Ω$_{rms}$ accuracy. The complete IC consumes only 4.2 μA from a 1-V power supply.
10 June 2022 in IEEE Transactions on Electron Devices
Topological spin textures are the next-generation spintronic building blocks for storing and processing information because of their controllable formation and annihilation. Memory, logic, and neuromorphic computing applications are reported using such devices having 2-D and 3-D spin textures, namely, vortex, skyrmions, localized bullet, and so on. A robust device-to-circuit-to-system level design is required for developing a neural network (NN) or a neuromorphic computing system (NCS) using these spin devices. Hence, in this work, we present a Verilog-A-based analytical model of a vortex spin-torque nano oscillator (V-STNO) for enabling circuit-level simulation. The model presented here is functional for both linear and nonlinear dynamics of the magnetic vortex core. The nonlinear dynamics show the formation and annihilation of the magnetic vortex depending on its critical currents. Furthermore, the developed model is analyzed for the nanopillar’s diameter and free layer thickness variations. Moreover, an investigation of the temperature effect on the device performance for a range of −40°C to 140 °C is carried out.
24 November 2022 in IEEE Magnetics Letters
Wearable and implantable devices (WIDs) come with several separate blocks such as pre-processing units, memory, and data transmission blocks. On the other hand, the multi-functional nature of spintronics devices such as memory, in-memory-computing, microwave frequency generation, and so on are paving paths for further advancement. Hence, in this paper, we present the concept of memory and communication-in-logic (MCL) using a magnetic tunnel junction (MTJ). In addition to reducing footprint area, this method also saves time and power consumption required for data transfer between the in-memory-computing and the communication blocks. Here, MTJ is presented as a memory device as well as an oscillator for communication purposes. Vortex-based spin-torque nano oscillators (V-STNO) and precessional STNOs (P-STNO) generate microwave frequency range (a few hundred MHz to a few GHz) wherein the frequency readout technique using the spin-torque diode is implemented for memory read function. In this work, a 300 nm nanodisk V-STNO generates 296 MHz and 312 MHz frequency for two states of chirality (a characteristic of magnetic vortex), respectively. These different frequencies can be sensed for a bit ‘0’/ ‘1’ read out through which the data from WIDs can be transmitted in a more energy and area-efficient way. The output power emission is 3.22 and 1.76 μW for bit ‘1’ and ‘0’, respectively for V-STNO which is three orders of magnitude larger than that of P-STNO. Finally, we demonstrate that V-STNO can transmit data up to 10 m in the air medium which is much longer than P-STNO (0.24 m).