Thermogravimetric analysis (TGA) was utilised to compare the thermal stability of pure phase change material (D-mannitol) to that of nano-enhanced PCM (NEPCM) (i.e., PCM containing 0.5% and 1% multiwalled carbon nanotubes (MWCNT)). Using model-free kinetics techniques, the kinetics of pure PCM and NEPCM degradation were analysed. Three different kinetic models such as Kissinger-Akahira-Sunose (KAS), the Flynn-Wall-Ozawa (FWO), and the Starink were applied to assess the activation energies of the pure and nano-enhanced PCM samples. Activation energies for pure PCM using the Ozawa, KAS, and Starink methods ranged from 71.10–77.77, 79.36–66.87, and 66.53–72.52 kJ/mol, respectively. NEPCM’s (1% MWCNT) activation energies ranged from 76.59–59.11, 71.52–52.28, and 72.15–53.07 kJ/mol. Models of machine learning were utilised to predict the degradation of NEPCM samples; these included linear regression, support vector regression, random forests, gaussian process regression, and artificial neural network models. The mass loss of the sample functioned as the output parameter, while the addition of nanoparticles weight fraction, the heating rate, and the temperature functioned as the input parameters. Experiment-based TGA data can be accurately predicted using the created machine learning models.
10 August 2022 in Transactions of the Indian Institute of Metals
In this study, a combination of multivariate and multi-objective analyses, namely principal component analysis with fuzzy logic, has been proposed to identify the input parameters for ER4043, aluminum alloy in wire arc additive manufacturing. Taguchi L9 orthogonal array was designed with three-factor, three-level input parameters. Mechanical properties such as tensile strength and hardness were used as the output parameters. As the Taguchi optimization is not sufficient for multi-response optimization, observed data for each response were normalized and then principal component analysis was applied. Further, multi-response performance index (MRPI) was identified using fuzzy logic approach so that this hybrid approach could be successfully applied and MRPI could give a combination of input parameters at an optimal level.
Cold Metal Transfer (CMT) welding was used to join SS304L plates using SS308L MIG wire. The effects of current, the distance between nozzle and tip, welding speed on strength, hardness and surface roughness of welded zone in the CMT process using response surface methodology were investigated in the present study. The outcomes show that current is having a significant effect on the outputs. Also, current interacting with weld speed is showing its mark on the output variables like tensile strength, hardness and surface roughness. Finally, optimal results are found and the experimental values are in coincidence with the predicted values.
Laser powder bed fusion (LPBF) enables near-net-shape production of Inconel 718 components, but electrically conductive post-processing is often required to obtain final dimensions and accessible cut surfaces. This study presents a before–after characterization of LPBF Inconel 718 subjected to one fixed wire electrical discharge machining (WEDM) condition. The comparison is intentionally limited to the available paired scanning electron microscopy, energy-dispersive x-ray spectroscopy (EDS), and x-ray diffraction (XRD) dataset and does not claim process-parameter optimization. The pre-WEDM LPBF surface displayed heterogeneous relief, locally adhered material, and track-like surface features, whereas the WEDM-cut surface exhibited crater-like depressions, globular resolidified particles, adhered debris, and localized crack-like discontinuities. EDS showed marked near-surface compositional changes: oxygen increased from 0.66 to 9.13 wt.%, copper from 0.68 to 5.65 wt.%, and zinc changed from below detection to 3.89 wt.%, consistent with oxidation and transfer from the brass wire electrode. The elevated carbon signal after WEDM is treated cautiously because deionized water was used as the dielectric and the available dataset does not exclude preparation or surface-contamination artefacts. XRD retained the dominant face-centred cubic gamma-Ni reflections after machining; apparent peak-position changes were observed, but they are not interpreted quantitatively as residual stress because calibration and peak-fitting uncertainty were not available. The combined results indicate that the selected WEDM operation produced pronounced morphological and chemical modification of the near-surface region while preserving the dominant bulk matrix phase. The study provides a transparent baseline for subsequent quantitative work on roughness, recast-layer thickness, residual stress, fatigue, and corrosion.