Dr.K.SRINIVASA NAIK

Dr. Dr.K.SRINIVASA NAIK

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2022 in International Journal of Microwave and Wireless Technologies
Verified
Journal Article
Closed access
PDF file
PSPasumarthi Suneetha
Pasumarthi Suneetha
DNDr.K.SRINIVASA NAIK
Dr.K.SRINIVASA NAIK
PMPachiyannan Muthusamy
Pachiyannan Muthusamy
The μ-negative metamaterial (MNG) two-element MIMO antenna design was proposed in this article for WiMAX (2.5–2.8 GHz), WLAN (3.2–5.9 GHz), and ITU band (8.15−8.25 GHz) applications. The first design of the MIMO antenna operates at 2.7 and 4.9 GHz frequencies. In order to reduce the mutual coupling, a defective ground structure is used. For further isolation improvement, an MNG unit cell is placed in between the two radiating elements at a distance of 10 mm. The designed antenna elements have better than −23 dB coupling isolation between the two radiating elements. Moreover, with MNG an additional frequency of 8.2 GHz is obtained, which is useful for ITU band applications. The proposed antenna bandwidth is expanded by 19% in the lower operational band, 20% in the second operational band, and 32% in the higher frequency band with the MNG unit cell. From the analysis, the proposed antenna is suitable for WiMAX/WLAN/ITU band applications because of its low enveloped correlation coefficient, and highest directive gain and low mutual coupling between the radiating components. The proposed antenna was simulated, fabricated, and measured with the help of the Schwarz ZVL vector network analyzer and anechoic chamber. Both measured and simulated results are highly accurate and highly recommended for WiMAX/WLAN/ITU bands.

20 December 2023 in International Journal on Interactive Design and Manufacturing (IJIDeM)
Verified
Journal Article
Closed access
PDF file
SASIRISHA AINAPURAPU
SIRISHA AINAPURAPU
RDRamasastry Devulapalli
Ramasastry Devulapalli
BCBharat Kumar Chigilipalli
Bharat Kumar Chigilipalli
DNDr.K.SRINIVASA NAIK
Dr.K.SRINIVASA NAIK
TKT. Ismail Kakaravada
T. Ismail Kakaravada
KKK. Leela Kumar
K. Leela Kumar

1 March 2016 in Indian Journal of Science and Technology
Verified
Journal Article
Open access
PDF file
DNDr.K.SRINIVASA NAIK
Dr.K.SRINIVASA NAIK
SAS. Aruna
S. Aruna
Marine radars are used to measure the bearing and distance of ships, to navigate and to fix their position at sea when within range of shore or other fixed references such as islands, buoys, and lightships. The asymmetrical sum patterns are very useful for marine radars when the ships sail in turbulent waters, the ships are subject to roll and pitch. Under these circumstances the communication is disturbed and sometimes it totally fails. In the applications, where the main beam is to point in desired direction and the sidelobes are to be suppressed to the desirable extent to reduce the ground clutter, the sum patterns with symmetric sidelobes are not suitable. The modified Elliott pattern is an excellent low-sidelobe distribution and has good efficiency. The modified Elliott pattern is itself a convenient illumination, that it can produce asymmetric patterns on both sides of the main beam. In the present work suitable amplitude and phase distributions are derived by using Fourier Transform technique to produce asymmetrical sum patterns. The weights of the each element are estimated at the source position. The source positions are found out according to Ishimuru spacing. These patterns are computed for small and large arrays. These patterns are useful in high resolution radars in point to point communication and also used in the marine radars.

1 January 2022
Verified
Conference Paper
Closed access
BRBotsa Venkata Ramana
Botsa Venkata Ramana
SAS. Aruna
S. Aruna
DNDr.K.SRINIVASA NAIK
Dr.K.SRINIVASA NAIK
BSBandaru Subbarao
Bandaru Subbarao
In this paper, design, and Simulation analysis of Half Impulse Radiating Antenna (HIRA) for Hardening of Military and Civilian Establishments from Intentional Electromagnetic Interference (IEMI) was carried out. IEMI is the act of intentionally generating a transient electromagnetic short pulse which has very high intensity peak values that are used to disrupt the electronic and electrical equipment operation. To produce a high intensity, fast rise time, short pulses (UWB signal) which covers a wide range of frequencies, a specific type of antenna is required. One such promising antenna would be HIRA. The HIRA is a transient antenna that take transient voltage as input and radiate Ultra-Wideband (UWB) electromagnetic field signals. Defence Critical Infrastructure need to be protected against Intentional transient Electromagnetic pulses. High Level of protection for IEMI will be done by hardening the electronic systems using electromagnetic barrier with different architectural Point of Entries (PoE) treatments. In this Paper, IEMI hardening of RF enclosure with different architectural PoE’s carried out by evaluating its Shielding Effectiveness (SE) using 3D EM simulation and Practical measurements.

5 January 2024 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
KGKishore Babu G
Kishore Babu G
SASingam Aruna
Singam Aruna
DNDr.K.SRINIVASA NAIK
Dr.K.SRINIVASA NAIK
This article analyses & describes a trapezoidal dual-band monopole antenna. The notch band monopole disables 4.4–5.7 GHz commercial communication equipment. The basic type operates at 2.5–4.4 GHz with a 500 MHz marginal bandwidth and 5.7–7 GHz with a 1000 MHz bandwidth. Present research optimises multiband trapezoidal antennas. Trapezoidal antennas improve multi-band wireless antennas. GSM, LTE, Wi-Fi, and 5G frequency bands start design. Inefficient and space-wasting, traditional antennas lack frequency range. Benefits of trapezoids: changing trapezoidal element sizes and angles enables the antenna to transmit many frequencies, sloping trapezium sides allow impedance changes without networks or tuning, numerical calculation and electromagnetic modelling optimise the trapezoidal antenna’s performance throughout the communication band, impedance matching, gain, and radiation efficiency provide transmission reliability, and broadband trapezoidal forms eliminate band-specific antennas & switches. Simplified antenna integration makes modern devices cheaper and simpler. In multiband applications, trapezoidal antennas outperform normal antennas. The antenna fits numerous wireless communication devices and systems due to its modest size and wide band coverage. The redesigned structure with notch increases operating band bandwidth and notches application bands between 4.4–5.7 GHz. By modifying trapezoidal geometry, we generate selective impedance transition notches to target crucial interference frequencies. Modern wireless communication systems with complicated interference situations can trust its careful engineering to provide good efficiency and radiation patterns across a wide frequency band while actively rejecting interfering signal. The peak realized gains obtained at 2.5 GHz is 2.4 dB, at 3.4 GHz it is 3.5 GHz and at 5.8 GHz it is 4.7 dB.

31 March 2020
Verified
Book Chapter
Closed access
PDF file
DNDr.K.SRINIVASA NAIK
Dr.K.SRINIVASA NAIK
DMD. Madhusudhan
D. Madhusudhan
SCS. Chandini
S. Chandini
SAS. Aruna
S. Aruna