In the present study, the effects of human physiological activity levels on the fatigue life of a porous magnesium scaffold have been investigated. First, the dynamic immersion and biomechanical testing are carried out on a porous magnesium scaffold to simulate the physiological conditions. Then, a numerical data analysis and computer simulations predict the implant failure values. A 3D CAD bone scaffold model was used to predict the implant fatigue, based on the micro-tomographic images. This study uses a simulation of solid mechanics and fatigue, based on daily physiological activities, which include walking, running, and climbing stairs, with strains reaching 1000–3500 µm/mm. The porous magnesium scaffold with a porosity of 41% was put through immersion tests for 24, 48, and 72 h in a typical simulated body fluid. Longer immersion times resulted in increased fatigue, with cycles of failure (Nf) observed to decrease from 4.508 × 1022 to 2.286 × 1011 (1.9 × 1011 fold decrease) after 72 hours of immersion with a loading rate of 1000 µm/mm. Activities played an essential role in the rate of implant fatigue, such as demonstrated by the 1.1 × 105 fold increase in the Nf of walking versus stair climbing at 7.603 × 1011 versus 6.858 × 105, respectively. The dynamic immersion tests could establish data on activity levels when an implant fails over time. This information could provide a basis for more robust future implant designs.
The high temperature on the austenitization showed the varied results in the fast spheroidization in high carbon leaf spring steel SUP9/55CrMnA. The heating temperature was held for 15 minutes in the austenitization temperature at 800, 850, and 900 °C respectively, which was intended to break cementite lamellar and then proceed to spheroidization at 720 °C for 2 hours. The purpose of this treatment was to enhance machinability, the experiment results showed a significant enhancing in machinability at 800 °C with 180 VHN hardness value and machining performance increased to 78.5% with 54 seconds machining time. The drilling process used an HSS twist drilling 2.5 mm in diameter and a workpiece height of 15 mm under equal spindle speed and load. The machining process is recommended to know the quality of the cementite, which was revealed on the drilling process of the initial specimen, the drill bit was unable to drill the specimen caused by chisel edge blunted. The acceleration spheroidization process under high temperature showed the significant enhancing in machinability of SUP9 leaf spring.
This study aims to investigate the effects of welding on the fatigue and crack behavior of ASTM A36 steel, a low-carbon steel commonly used in various applications, particularly in pressure vessel transport tanks for preventing environmental and health problems due to liquid petroleum gas (LPG) transport tank leaks. This research evaluates the influence of welding on the material’s properties through various testing methodologies, including impact and fatigue tests. The impact tests were conducted using the Charpy V-Notch method, while fatigue tests employed the repeated bending method. The specimens were subjected to testing at different temperatures and angles to evaluate their performance under various conditions. The findings indicate that welding introduces weaknesses in the material, affecting its impact energy and fatigue life. Visual observations and metallographic examinations further revealed the fracture characteristics and microstructural changes in welded and non-welded specimens.
The main business processes of PT Pupuk Sriwidjaja Palembang is selling of bulk urea fertilizer. In distribution process of bulk urea to ships use the Quadrant Ship Loader (QSL). To maintain quality performance of the QSL have been applied preventive maintenance once in 4 (four) months. There is some work in implementing preventive maintenance, one of them is lubrication wire rope. Lubrication wire rope takes the longest time among other jobs, which is about 90 minutes in each time to do preventive maintenance. In this case by making wire rope lubrication tool. Using this tool, the lubrication work on PU-5858L QSL wire rope can be pressed up to 30 minutes in every preventive maintenance exercise. Another advantage of using the wire rope lubrication tool can minimize the occurrence of grease droplets so as to avoid potential environmental pollution, improved lubrication quality by 29%, increased cost efficiency, time of workmanship by 67%, decrease of potential of environmental pollution by 67%, and decrease in employment injury opportunities by 40%.
21 November 2020 in Indonesian Journal of Engineering and Science
This study presents a case study investigation on failure analysis of drill pipe during the drilling operation and to establish a general understanding of fatigue failure with experiments and several tests. Drill pipe load comprises tensile, compression, bending, hydrostatic pressure and vibration, which causes damage due to fatigue failure to the drill pipe. The method involves subjecting a 2 in length and nominal diameter 3.25 in connection NC50 19.5 ppf drill pipe to predetermined caused failure by experimental tests and analysis. Mechanical examination such as tensile test and hardness test, and metallurgical examination such as spectrometry, fractography, SEM and EDX testing are conducted. The result shows that the cause of failure on the thread drill pipe was due to fatigue failure. It showed by the presence of microcracks, which accumulated from the load in the drill pipe. In addition, propagation of the crack at critical depth resulting in failure during drilling operations.