Seok Hwan An

Seok Hwan An


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 February 2024 in Polymers
Verified
Journal Article
Open access
PDF file
SASeok Hwan An
Seok Hwan An
KKKiYun Kim
KiYun Kim
Jea Uk LeeJea Uk Lee
Jea Uk Lee
Carbon nanotubes (CNTs), known for their exceptional mechanical, thermal, and electrical properties, are being explored as cement nanofillers in the construction field. However, due to the limited water dispersion of CNTs, polymer dispersing agents like polycarboxylate ether (PCE) and sulfonated naphthalene formaldehyde (SNF) are essential for uniform dispersion. In a previous study, PCE and SNF, common cement superplasticizers, effectively dispersed CNTs in cement nanocomposites. However, uncertainties remained regarding the extent to which all dispersing agents interacted efficiently with CNTs. Therefore, this research quantitatively assessed CNT interaction with dispersing agents through dispersion and centrifugation. Approximately 37% of PCE and 50% of SNF persisted compared to CNT after centrifugation. The resulting cement nanocomposites, with optimized mixing ratios, exhibited enhanced compressive strength of about 14% for CNT/PCE (78.13 MPa) and 12.3% for CNT/SNF (76.97 MPa) compared to plain cement (68.52 MPa). XRD results linked strength reinforcement to increased cement hydrate from optimized CNT dispersion. FE-SEM analysis revealed that CNTs were positioned within the pores of the cement. These optimized cement nanocomposites hold promise for improved safety in the construction industry.

26 February 2023 in Polymers
Verified
Journal Article
Open access
PDF file
JPJung Bin Park
Jung Bin Park
SASeok Hwan An
Seok Hwan An
JJJae Woong Jung
Jae Woong Jung
Jea Uk LeeJea Uk Lee
Jea Uk Lee
In recent years, the utilization of three-dimensional (3D) printing has been expanding due to advances in technology and economic efficiency. One of the 3D printing technologies is fused deposition modeling, which can be used to create different kinds of products or prototypes from various polymer filaments. In this study, the activated carbon (AC) coating was introduced to the 3D outputs printed using recycled polymer materials to impart multi-functions such as adsorption of harmful gas and antimicrobial activities. A filament of uniform diameter (1.75 μm) and a filter template in the form of a 3D fabric shape were prepared through the extrusion and 3D printing processes, respectively, of the recycled polymer. In the next process, the 3D filter was developed by coating the nanoporous AC, produced from the pyrolysis fuel oil and waste PET, on the 3D filter template through direct coating. The 3D filters coated with the nanoporous activated carbon showed the enhanced adsorption capacity of 1038.74 mg of SO2 gas and the antibacterial properties of 49% removal of E. coli bacteria. As a model system, a functional gas mask that has harmful gas adsorption abilities and antibacterial properties has been produced by a 3D printing process.

31 March 2024 in Polymers
Verified
Journal Article
Open access
PDF file
KKKiYun Kim
KiYun Kim
SASeok Hwan An
Seok Hwan An
Jea Uk LeeJea Uk Lee
Jea Uk Lee
Graphene, renowned for its exceptional mechanical, thermal, and electrical properties, is being explored as a cement nanofiller in the construction field. However, the limited water dispersibility of graphene requires the use of polymer superplasticizers, such as polycarboxylate ether (PCE). Previous studies have investigated the mechanisms by which PCE facilitates the dispersion of graphene within cement nanocomposites. However, such studies have made minimal progress, indicating a lack of understanding of the effect of residual PCE (rPCE) remaining in aqueous solution without binding to graphene. In this study, the effects of rPCE on the dispersion of graphene and the mechanical properties of graphene–cement composites (GCCs) were systematically analyzed. For this purpose, the content of rPCE was accurately measured through the centrifugation process and thermal analysis of graphene dispersion with PCE, and the result was 78.0 wt.% compared to graphene. The optical microscopy, particle size analysis, and contact angle measurement of the graphene dispersions with and without rPCE confirmed that rPCE is crucial for the dispersion of graphene and the enhancement of the interfacial affinity between graphene and cement. Additionally, the compressive strength of GCC with rPCE exhibited a substantial enhancement of approximately 10% (68.36 MPa) compared to plain cement (62.33 MPa). The effectiveness of rPCE in enhancing compressive strength correlated with the uniform dispersion of graphene within GCC and the promotion of cement hydration, as evidenced by field emission scanning electron microscopy and X-ray diffraction, respectively.