Carbon nanotubes (CNTs), known for their exceptional mechanical, thermal, and electrical properties, are being explored as cement nanofillers in the construction field. However, due to the limited water dispersion of CNTs, polymer dispersing agents like polycarboxylate ether (PCE) and sulfonated naphthalene formaldehyde (SNF) are essential for uniform dispersion. In a previous study, PCE and SNF, common cement superplasticizers, effectively dispersed CNTs in cement nanocomposites. However, uncertainties remained regarding the extent to which all dispersing agents interacted efficiently with CNTs. Therefore, this research quantitatively assessed CNT interaction with dispersing agents through dispersion and centrifugation. Approximately 37% of PCE and 50% of SNF persisted compared to CNT after centrifugation. The resulting cement nanocomposites, with optimized mixing ratios, exhibited enhanced compressive strength of about 14% for CNT/PCE (78.13 MPa) and 12.3% for CNT/SNF (76.97 MPa) compared to plain cement (68.52 MPa). XRD results linked strength reinforcement to increased cement hydrate from optimized CNT dispersion. FE-SEM analysis revealed that CNTs were positioned within the pores of the cement. These optimized cement nanocomposites hold promise for improved safety in the construction industry.
Graphene, renowned for its exceptional mechanical, thermal, and electrical properties, is being explored as a cement nanofiller in the construction field. However, the limited water dispersibility of graphene requires the use of polymer superplasticizers, such as polycarboxylate ether (PCE). Previous studies have investigated the mechanisms by which PCE facilitates the dispersion of graphene within cement nanocomposites. However, such studies have made minimal progress, indicating a lack of understanding of the effect of residual PCE (rPCE) remaining in aqueous solution without binding to graphene. In this study, the effects of rPCE on the dispersion of graphene and the mechanical properties of graphene–cement composites (GCCs) were systematically analyzed. For this purpose, the content of rPCE was accurately measured through the centrifugation process and thermal analysis of graphene dispersion with PCE, and the result was 78.0 wt.% compared to graphene. The optical microscopy, particle size analysis, and contact angle measurement of the graphene dispersions with and without rPCE confirmed that rPCE is crucial for the dispersion of graphene and the enhancement of the interfacial affinity between graphene and cement. Additionally, the compressive strength of GCC with rPCE exhibited a substantial enhancement of approximately 10% (68.36 MPa) compared to plain cement (62.33 MPa). The effectiveness of rPCE in enhancing compressive strength correlated with the uniform dispersion of graphene within GCC and the promotion of cement hydration, as evidenced by field emission scanning electron microscopy and X-ray diffraction, respectively.
Silicon is widely recognized as a next-generation anode owing to its exceptional theoretical capacity, yet its practical deployment in lithium-ion batteries is constrained by severe volume expansion, particle fracture, loss of electrical percolation, and solid electrolyte interphase layer instability. Polymer-based strategies have emerged as accessible solutions to engineer extensive volume changes and interfacial compatibility, while preserving pathways for charge transport. Viscoelastic polymer binders dissipate stress, catechol-inspired chemistries strengthen adhesion and tailor interphases, and conductive polymers can function simultaneously as binder, electronic additive, and artificial SEI. This review describes these approaches through a structure–process–performance perspective, emphasizing practically relevant metrics, such as initial capacity, initial Coulombic efficiency, and long-term cycling stability. We organize the main section into (i) dopamine-derived interfacial engineering, (ii) self-healing three-dimensional network binders, and (iii) conductive-polymer-based designs. In the last section, we articulate the functional requirements of polymers in silicon anodes, outline the ideal structural designs, and provide forward-looking avenues for future lithium-ion battery anode research.
The structural design of self-standing electrodes without binders and current collectors is critical for maximizing the energy density of lithium-ion batteries, yet achieving electrical conductivity, ion accessibility, and mechanical integrity in a single architecture remains challenging. Although Ti3C2Tx MXene is a promising candidate, owing to its high metallic conductivity and structural robustness, conventional dense films suffer from restacking-induced restricted electrolyte penetration and Li+ diffusion. Conversely, porous MXene foams can mitigate restacking but exhibit weak electrical contact and limited mechanical robustness. To overcome this structural trade-off, we designed a self-standing MXene film/foam bilayer anode integrating a compact film layer with a porous foam layer, which was followed by air annealing to generate TiO2/TiOx-containing active sites. Among the various film/foam ratios systematically evaluated, the optimal 2:8 bilayer electrode exhibited low charge-transfer resistance and fast redox kinetics, delivering 83.24 mAh g−1 at 1000 mA g−1 and retaining 195.12 mAh g−1 at 50 mA g−1 after 200 cycles, outperforming the single-architecture electrodes. These results demonstrate that the bilayer design effectively combines the structural and electrical stability of the film with the rapid ion transport and abundant active sites of the foam, offering a promising strategy for high-performance self-standing anodes.