Zhao Liang

Dr. Zhao Liang


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 April 2018 in Nanomaterials
Verified
Journal Article
Open access
PDF file
FWFuhua Wei
Fuhua Wei
Ding ChenDing Chen
Ding Chen
ZLZhao Liang
Zhao Liang
SZShuaiqi Zhao
Shuaiqi Zhao
Using a microwave-assisted ball-milling approach, Fe-based metal-organic frameworks (Fe-MOFs) were prepared from FeSO4·7H2O and trimesic acid. Scanning electron microscopy, Fourier-transform infrared spectrometry, X-ray, and thermogravimetric analysis were utilized to characterize the thermal stability and structure of the prepared Fe-MOFs. These Fe-MOFs were used to remove organic dyes from aqueous solutions. Specifically, they removed 96.97% of 23.3592 mg/L of Congo red in a 200 mL solution within 300 min of treatment with natural light at 15 °C. Likewise, 88.21 and 70.90% of 22.7527 mg/L of Orange II and 17.8326 mg/L of Rhodamine B, respectively, were removed from 200 mL solutions within 300 min of treatment at 15 °C. At 35 °C, 99.57, 95.98, and 99.38% of 23.3855 mg/L of Congo Red, 22.7365 mg/L of Orange II, and 17.9973 mg/L of Rhodamine B, respectively, were removed from 200 mL solutions within 300 min of treatment. The adsorption kinetics were investigated and the pseudo-first-order kinetic model was found to be superior to the pseudo-second-order kinetic model. Overall, using metal-organic frameworks to treat dye wastewater was found to be inexpensive, feasible, and efficient. Therefore, this material has future prospects in research and applications in the purification of wastewater.

29 May 2023 in Molecules
Verified
Journal Article
Open access
PDF file
FWFuhua Wei
Fuhua Wei
KWKui Wang
Kui Wang
WLWenxiu Li
Wenxiu Li
QRQinhui Ren
Qinhui Ren
LQLan Qin
Lan Qin
SWSiyuan Wang
Siyuan Wang
This work studies the use of Fe/Ni-MOFs for the removal of ciprofloxacin (CIP) in wastewater. Fe/Ni-MOFs are prepared by the solvothermal method and characterized by X-ray diffraction (XRD), a scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), and a thermal gravimetric analyzer (TG). Under the conditions of the concentration of 50 ppm, a mass of 30 mg, and a temperature of 30 °C, the maximum adsorption capacity of ciprofloxacin removal within 5 h was 232.1 mg/g. The maximum removal rate was 94.8% when 40 mg of the Fe/Ni-MOFs was added to the solution of 10 ppm ciprofloxacin. According to the pseudo-second-order (PSO) kinetic model, the R2 values were all greater than 0.99, which proved that the adsorption theory of ciprofloxacin by Fe/Ni-MOFs was consistent with the practice. The adsorption results were mainly affected by solution pH and static electricity, as well as other factors. The Freundlich isotherm model characterized the adsorption of ciprofloxacin by Fe/Ni-MOFs as multilayer adsorption. The above results indicated that Fe/Ni-MOFs were effective in the practical application of ciprofloxacin removal.

24 February 2022 in Inorganics
Verified
Journal Article
Open access
PDF file
QRQinhui Ren
Qinhui Ren
MNMeng Nie
Meng Nie
LYLili Yang
Lili Yang
FWFuhua Wei
Fuhua Wei
BDBo Ding
Bo Ding
ZLZhao Liang
Zhao Liang
Fe-MOFs were prepared using a solvothermal method, and were characterized by scanning electron microscopy. We explored the application of Fe-MOFs as an adsorbing material for the removal of Rhodamine B (RhB) from aqueous solutions. The experimental data were simulated by dynamics and the results showed that the pseudo–second-order kinetics model was appropriate for analysis of RhB removal. We studied the adsorption capacity of MOF materials under different masses, concentrations, and pH conditions. When the pH was 6, the maximum adsorption capacity within 4 h was 135 mg/g. In summation, the removal of RhB from wastewater using MOFs is feasible, inexpensive, and effective. Hence, our findings indicate that MOFs have a broad application in the purification of wastewater.

1 January 2023 in Green Processing and Synthesis
Verified
Journal Article
Open access
PDF file
QRQinhui Ren
Qinhui Ren
YMYufu Ma
Yufu Ma
FWFuhua Wei
Fuhua Wei
LQLan Qin
Lan Qin
HCHongliang Chen
Hongliang Chen
SWSiyuan Wang
Siyuan Wang
Zr-metal-organic frameworks (Zr-MOFs) were prepared by a solvothermal method and characterized by X-ray diffraction, scanning electron microscopy, and thermogravimetry. Zr-MOFs were used to remove doxycycline hydrochloride (DOC) from wastewater. According to the experimental results, the maximum adsorption capacity of DOC by Zr-MOFs within 5 h was 148.7 mg·g −1 . From the pseudo-second-order kinetics model, all R 2 values were greater than 0.99, which proved that the adsorption of DOC by Zr-MOFs was consistent with practice. According to the Freundlich isotherm model, the adsorption of DOC by Zr-MOFs proceeded via multilayer adsorption. The aforementioned results show that Zr-MOFs have good application prospects for removing DOC from wastewater.

15 August 2024 in Molecules
Verified
Journal Article
Open access
PDF file
FWFuhua Wei
Fuhua Wei
XGXue Gong
Xue Gong
QRQinhui Ren
Qinhui Ren
HCHongliang Chen
Hongliang Chen
YZYutao Zhang
Yutao Zhang
ZLZhao Liang
Zhao Liang
In this study, Co/Cd-MOFs were synthesized via a solvothermal method. The resulting material was subjected to calcination at 900 °C for 2 h and characterized using FT-IR, XRD, and SEM techniques to assess its efficacy in moxifloxacin removal. The experimental findings revealed that the maximum adsorption capacity of Co/Cd-MOFs for moxifloxacin was observed at 350.4 mg/g within a 5 h timeframe. Furthermore, the analysis based on the pseudo-second-order kinetic model demonstrated that the adsorption process adhered to this specific model. Additionally, the adsorption isotherm analysis indicated that Freundlich multilayer adsorption provided the best description of the interaction between moxifloxacin and the Co/Cd-MOF material. These experimental and theoretical results collectively suggest that employing Co/Cd-MOFs as adsorbents holds promise for wastewater treatment applications.

1 March 2018 in Journal of Environmental Engineering
Verified
Journal Article
Closed access
ZLZhao Liang
Zhao Liang
QYQingwei Yan
Qingwei Yan
Ding ChenDing Chen
Ding Chen
The applicability of microwave-assisted ball milling for the treatment of p-nitrophenol (PNP) was investigated in this study. The degradation process of PNP was studied by using UV-vis (ultraviolet-visible) spectra, total organic carbon (TOC), fluorescence intensities, electroconductivity, and X-ray diffraction (XRD). PNP was degraded 99.1% after microwave-assisted ball milling for only 15 min at pH 3 when the initial concentration of PNP was 300  mg/L . When the pH value of solution was 3, PNP can be mineralized completely in 12 min by microwave-assisted ball milling and adding hydrogen peroxide. The new high-activity nanoscale zero-valent iron (NZVI) was produced constantly in the process of stirring, collision, and spalling, preventing nanoparticles from reuniting. Further, the hydroxyl radical generated in the coupling effect of microwave and mechanical force also improved the reaction rate.