This study investigates the mechanical behavior of steel fiber-reinforced concrete (SFRC) beams internally reinforced with steel bars and externally bonded with carbon fiber-reinforced polymer (CFRP) sheets fixed by adhesive and hybrid jointing techniques. In particular, attention is paid to the load resistance and failure modes of composite beams. The steel fibers were used to avoiding the rip-off failure of the concrete cover. The CFRP sheets were fixed to the concrete surface by epoxy adhesive as well as combined with various configurations of small-diameter steel pins for mechanical fastening to form a hybrid connection. Such hybrid jointing techniques were found to be particularly advantageous in avoiding brittle debonding failure, by promoting progressive failure within the hybrid joints. The use of CFRP sheets was also effective in suppressing the localization of the discrete cracks. The development of the crack pattern was monitored using the digital image correlation method. As revealed from the image analyses, with an appropriate layout of the steel pins, brittle failure of the concrete-carbon fiber interface could be effectively prevented. Inverse analysis of the moment-curvature diagrams was conducted, and it was found that a simplified tension-stiffening model with a constant residual stress level at 90% of the strength of the SFRC is adequate for numerically simulating the deformation behavior of beams up to the debonding of the CFRP sheets.
In structural rehabilitation and strengthening, the structural members are often required to cope with larger design loading due to the upgrading of building services and design standard, while maintaining the member size to preserve the architectural dimensions and headroom. Moreover, durability enhancement by mitigating or eliminating the reinforcement corrosion problem is often desired. Concrete cracking is a major initiating and accelerating factor of the corrosion of steel reinforcement. The application of fibres is a prominent solution to the cracking problem. Furthermore, the fibres can increase the mechanical resistance of the strengthening systems. This study reveals the synergy effect of the combined application of steel fibres and external carbon fibre-reinforced polymer (CFRP) sheets. The investigation encompasses the use of fibre-reinforced polymer (FRP) reinforcing bars, discrete steel fibres, externally bonded and mechanically fastened FRP sheets in different combinations. It is discovered that the steel fibres can help to control concrete cracking and eventually alter the failure mode and enhance the flexural resistance. The FRP reinforcement system, together with the steel fibres, radically resolves the structural safety problem caused by corrosion of the steel bar reinforcement. Finally, the impact of the external sheet on the fire limit state performance needs to be resolved, such as by adopting fire protection rendering for the finishes layer.