This study investigates the mechanical behavior of steel fiber-reinforced concrete (SFRC) beams internally reinforced with steel bars and externally bonded with carbon fiber-reinforced polymer (CFRP) sheets fixed by adhesive and hybrid jointing techniques. In particular, attention is paid to the load resistance and failure modes of composite beams. The steel fibers were used to avoiding the rip-off failure of the concrete cover. The CFRP sheets were fixed to the concrete surface by epoxy adhesive as well as combined with various configurations of small-diameter steel pins for mechanical fastening to form a hybrid connection. Such hybrid jointing techniques were found to be particularly advantageous in avoiding brittle debonding failure, by promoting progressive failure within the hybrid joints. The use of CFRP sheets was also effective in suppressing the localization of the discrete cracks. The development of the crack pattern was monitored using the digital image correlation method. As revealed from the image analyses, with an appropriate layout of the steel pins, brittle failure of the concrete-carbon fiber interface could be effectively prevented. Inverse analysis of the moment-curvature diagrams was conducted, and it was found that a simplified tension-stiffening model with a constant residual stress level at 90% of the strength of the SFRC is adequate for numerically simulating the deformation behavior of beams up to the debonding of the CFRP sheets.
In structural rehabilitation and strengthening, the structural members are often required to cope with larger design loading due to the upgrading of building services and design standard, while maintaining the member size to preserve the architectural dimensions and headroom. Moreover, durability enhancement by mitigating or eliminating the reinforcement corrosion problem is often desired. Concrete cracking is a major initiating and accelerating factor of the corrosion of steel reinforcement. The application of fibres is a prominent solution to the cracking problem. Furthermore, the fibres can increase the mechanical resistance of the strengthening systems. This study reveals the synergy effect of the combined application of steel fibres and external carbon fibre-reinforced polymer (CFRP) sheets. The investigation encompasses the use of fibre-reinforced polymer (FRP) reinforcing bars, discrete steel fibres, externally bonded and mechanically fastened FRP sheets in different combinations. It is discovered that the steel fibres can help to control concrete cracking and eventually alter the failure mode and enhance the flexural resistance. The FRP reinforcement system, together with the steel fibres, radically resolves the structural safety problem caused by corrosion of the steel bar reinforcement. Finally, the impact of the external sheet on the fire limit state performance needs to be resolved, such as by adopting fire protection rendering for the finishes layer.
Fiber-reinforced polymer (FRP) laminates are widely used in both aviation and structural engineering, yet their implementation reflects fundamentally different paradigms. Aviation represents a fatigue-critical, certification-driven domain, while structural engineering emphasizes long-term durability and environmental resilience. These sectors were selected as conceptual extremes to explore how contrasting design philosophies, degradation mechanisms, and inspection strategies shape the performance and reliability of laminated FRP composites. Their approaches offer complementary insights: aviation contributes high-fidelity modeling and embedded monitoring, while structural engineering provides scalable inspection strategies and exposure-based degradation logic. Both sectors employ classical laminate theory and finite element modeling, but diverge in modeling depth and regulatory integration. This review synthesizes these contrasts based on 168 literature references, including 141 published between 2020 and 2025, reflecting recent developments in composite design, modeling, and inspection. It contributes to materials engineering by proposing hybrid modeling and inspection frameworks that integrate progressive damage simulation with durability-based design logic. By bridging the modeling precision of aviation with the environmental realism of structural engineering, this review outlines a pathway toward unified, sustainable, and adaptive engineering practices for laminated FRP composites.
Advanced materials have been created for structural application during the past decades. Engineers, however, faced severe problems due to the absence of a reliable technique for ensuring the required structural properties minimising the amount of material used. A lack of constitutive models for the analysis of the structural systems also exists. Residual stiffness of flexural concrete elements subjected to short-term load is the focus of this research. Tension-stiffening models were developed to represent the deformation response of the members reinforced with internal bars. This study examines the suitability of the tension-stiffening modelling approach for simulating the deformation behaviour of the composite specimens comprising glass fibre-reinforced polymer (GFRP) pultruded profile adhesively bonded to the tensile surface of the concrete beam. The study employs a nonlinear finite element approach and analytical model to simulate the deformation behaviour of the flexural elements.
The use of high-strength steel (HSS) is a current trend of the construction industry. Tubular profiles are widely used in various structural applications because of their high stiffness-to-weight ratio, exceptional resistance to torsion, and aesthetic appearance. However, the increase of the strength for the same elastic modulus of the material and geometry of tubular profiles is often not proportional to the rise of the load-bearing capacity of the structural element. The obtained experimental results support the above inference. The study was based on the flexural test results of two groups of HSS and normal-strength steel (NSS) tubular specimens with a 100 × 100 × 4 mm (height × width × thickness) cross-section. Numerical (finite element) simulation results demonstrated that the shape of the cross-section influenced the efficiency of utilisation of HSS. The relationship between the relative increase of the load-bearing capacity of the beam specimen and the corresponding change of the steel strength determined the utilisation efficiency.