Salisu Nasir

Dr. Salisu Nasir

Federal University Dutse
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 February 2018 in Materials
Verified
Journal Article
Open access
PDF file
Salisu NasirSalisu Nasir
Salisu Nasir
MHMohd Zobir Bin Hussien
Mohd Zobir Bin Hussien
Zulkarnain ZainalZulkarnain Zainal
Zulkarnain Zainal
NYNor Azah Yusof
Nor Azah Yusof
Carbon in its single entity and various forms has been used in technology and human life for many centuries. Since prehistoric times, carbon-based materials such as graphite, charcoal and carbon black have been used as writing and drawing materials. In the past two and a half decades or so, conjugated carbon nanomaterials, especially carbon nanotubes, fullerenes, activated carbon and graphite have been used as energy materials due to their exclusive properties. Due to their outstanding chemical, mechanical, electrical and thermal properties, carbon nanostructures have recently found application in many diverse areas; including drug delivery, electronics, composite materials, sensors, field emission devices, energy storage and conversion, etc. Following the global energy outlook, it is forecasted that the world energy demand will double by 2050. This calls for a new and efficient means to double the energy supply in order to meet the challenges that forge ahead. Carbon nanomaterials are believed to be appropriate and promising (when used as energy materials) to cushion the threat. Consequently, the amazing properties of these materials and greatest potentials towards greener and environment friendly synthesis methods and industrial scale production of carbon nanostructured materials is undoubtedly necessary and can therefore be glimpsed as the focal point of many researchers in science and technology in the 21st century. This is based on the incredible future that lies ahead with these smart carbon-based materials. This review is determined to give a synopsis of new advances towards their synthesis, properties, and some applications as reported in the existing literatures.

13 July 2017 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Salisu NasirSalisu Nasir
Salisu Nasir
MHMohd Zobir Bin Hussien
Mohd Zobir Bin Hussien
NYNor Azah Yusof
Nor Azah Yusof
Zulkarnain ZainalZulkarnain Zainal
Zulkarnain Zainal
Herein, a new approach was proposed to produce reduced graphene oxide (rGO) from graphene oxide (GO) using various oil palm wastes: oil palm leaves (OPL), palm kernel shells (PKS) and empty fruit bunches (EFB). The effect of heating temperature on the formation of graphitic carbon and the yield was examined prior to the GO and rGO synthesis. Carbonization of the starting materials was conducted in a furnace under nitrogen gas for 3 h at temperatures ranging from 400 to 900 °C and a constant heating rate of 10 °C/min. The GO was further synthesized from the as-carbonized materials using the ‘improved synthesis of graphene oxide’ method. Subsequently, the GO was reduced by low-temperature annealing reduction at 300 °C in a furnace under nitrogen gas for 1 h. The IG/ID ratio calculated from the Raman study increases with the increasing of the degree of the graphitization in the order of rGO from oil palm leaves (rGOOPL) < rGO palm kernel shells (rGOPKS) < rGO commercial graphite (rGOCG) < rGO empty fruit bunches (rGOEFB) with the IG/ID values of 1.06, 1.14, 1.16 and 1.20, respectively. The surface area and pore volume analyses of the as-prepared materials were performed using the Brunauer Emmett Teller-Nitrogen (BET-N2) adsorption-desorption isotherms method. The lower BET surface area of 8 and 15 m2 g−1 observed for rGOCG and rGOOPL, respectively could be due to partial restacking of GO layers and locally-blocked pores. Relatively, this lower BET surface area is inconsequential when compared to rGOPKS and rGOEFB, which have a surface area of 114 and 117 m2 g−1, respectively.

5 December 2018 in Energies
Verified
Journal Article
Open access
PDF file
Salisu NasirSalisu Nasir
Salisu Nasir
MHMohd Zobir Bin Hussien
Mohd Zobir Bin Hussien
Zulkarnain ZainalZulkarnain Zainal
Zulkarnain Zainal
NYNor Azah Yusof
Nor Azah Yusof
SZSyazwan Afif Mohd Zobir
Syazwan Afif Mohd Zobir
In this study, activated carbons (ACs) were produced from oil palm leaves (OPL) and palm kernel shells (PKS) using different concentrations (0%, 11%, and 33%) of H3PO4 as the activating agent. The Brunauer–Emmett–Teller (BET) results indicated that surface area decreases with the decreasing of the concentration of the H3PO4 in the following order: AC from oil palm leaves was (OPLAC-0% H3PO4) < (OPLAC-11% H3PO4) < (OPLAC-33% H3PO4), with the BET surface area values of 37, 760, and 780 m2/g, respectively. Similarly, the PKS-derived AC followed the same trend of (PKSAC-0% H3PO4) < (PKSAC-11% H3PO4) < (PKSAC-33% H3PO4), with the BET surface area values of 3, 52, and 1324 m2/g, respectively. Based on this finding, it was observed that H3PO4 had exhibited an influential role on enhancing the surface properties of the AC. On the contrary, it slightly decreased the graphitic trait of the AC by considering their IG/ID trends, which were generated from the Raman spectral analysis. The energy storage capacity of the AC was further tested using cyclic voltammetry. Three of the samples were found to have high capacitance values of 434 F g−1, 162 F g−1, and 147 F g−1 at 5 mVs−1. The first (434 F g−1) is much higher than the specific capacitance value (343 F g−1) of the only oil palm leaf-derived porous carbon nanoparticles ever reported in the literature.

1 February 2019 in BioResources
Verified
Journal Article
Closed access
Salisu NasirSalisu Nasir
Salisu Nasir
MHMohd Zobir Bin Hussien
Mohd Zobir Bin Hussien
ZZZulkarnain Zainal
Zulkarnain Zainal
NYNor Azah Yusof
Nor Azah Yusof
SZSyazwan Afif Mohd Zobir
Syazwan Afif Mohd Zobir
IAIbrahim Mustapha Alibe
Ibrahim Mustapha Alibe
The crises in global energy and environmental degradation, combined with developing consumer demands have stimulated researchers’ interest in inexpensive, environmentally friendly functional materials. Based on a projected annual production of palm oil in Malaysia of over 15.4 million metric tons by 2020, it is estimated that about 46.6 tons of lignocellulosic wastes will be generated. Transforming these wastes into wealth could be integrated into a global paradigm shift towards sustainable development. Carbon-based nanomaterials including graphene, graphene oxide, carbon nanotubes, epoxy nanocomposites, porous carbon nanoparticles, and nanoactivated carbons-filled-epoxy nanocomposites have been produced from these by-product materials using methods such as vapour deposition, pyrolysis, hydrolysis, chemical composition, high energy ball milling, and solution casting. This review attempts to present the current developments on renewable carbon nanomaterials derived from oil palm-based precursors with some insights given on their potential applications as energy storage materials.

29 November 2019 in Journal of Nanomaterials
Verified
Journal Article
Open access
PDF file
Salisu NasirSalisu Nasir
Salisu Nasir
MHMohd Zobir Bin Hussien
Mohd Zobir Bin Hussien
Zulkarnain ZainalZulkarnain Zainal
Zulkarnain Zainal
NYNor Azah Yusof
Nor Azah Yusof
This paper is an expansion of our previous work on the synthesis of graphene oxides and reduced graphene oxides from different kinds of oil palm waste-based feedstocks, namely, OPL (oil palm leaf), PKS (palm kernel shell), and EFB (empty fruit bunch). Here, the electrochemical measurements of the resulting reduced graphene oxides derived via mild-temperature annealing reduction of the graphene oxides were accomplished using cyclic voltammetry and galvanostatic charge/discharge processes. The findings put forward their promising features for supercapacitor applications. For instance, the reduced graphene oxide derived using EFB precursor (rGOEFB) which has a BET surface area of 117 m2 g-1exhibits a specific capacitance of 688 F g−1at an applied current density of 0.8 A g-1. This is higher than that observed for reduced graphene oxides derived from oil palm leaf (rGOOPL), palm kernel shell (rGOPKS), and the commercially acquired graphite (rGOCG), which possessed specific capacitance values of 632, 424, and 220 F g−1, respectively. It can be deduced that the specific capacitance of the reduced graphene oxide samples increases in the following order: (rGOCG) < (rGOPKS) < (rGOOPL) < (rGOEFB). In summary, these new classes of carbon-based nanomaterials could be applied as efficient electrode materials for supercapacitor application with potential good performance. With this novel green and sustainable approach, various carbon-based nanomaterials can be fabricated for a broad range of multifunctional applications.

27 February 2021 in Materials
Verified
Journal Article
Open access
PDF file
IAIBRAHIM ALIBE
IBRAHIM ALIBE
KMKhamirul Matori
Khamirul Matori
MZMohd Hafiz Mohd Zaid
Mohd Hafiz Mohd Zaid
Salisu NasirSalisu Nasir
Salisu Nasir
AAAli Mustapha Alibe
Ali Mustapha Alibe
MKMohammad Zulhasif Ahmad Khiri
Mohammad Zulhasif Ahmad Khiri
The contemporary market needs for enhanced solid–state lighting devices has led to an increased demand for the production of willemite based phosphors using low-cost techniques. In this study, Ce3+ doped willemite nanoparticles were fabricated using polymer thermal treatment method. The special effects of the calcination temperatures and the dopant concentration on the structural and optical properties of the material were thoroughly studied. The XRD analysis of the samples treated at 900 °C revealed the development and or materialization of the willemite phase. The increase in the dopant concentration causes an expansion of the lattice owing to the replacement of larger Ce3+ ions for smaller Zn2+ ions. Based on the FESEM and TEM micrographs, the nanoparticles size increases with the increase in the cerium ions. The mean particles sizes were estimated to be 23.61 nm at 1 mol% to 34.02 nm at 5 mol% of the cerium dopant. The optical band gap energy of the doped samples formed at 900 °C decreased precisely by 0.21 eV (i.e., 5.21 to 5.00 eV). The PL analysis of the doped samples exhibits a strong emission at 400 nm which is ascribed to the transition of an electron from localized Ce2f state to the valence band of O2p. The energy level of the Ce3+ ions affects the willemite crystal lattice, thus causing a decrease in the intensity of the green emission at 530 nm and the blue emission at 485 nm. The wide optical band gap energy of the willemite produced is expected to pave the way for exciting innovations in solid–state lighting applications.