An effective way to reduce off-road traffic in forests is to implement greater distances between skid trails. However, this implies that trees beyond the boom reach of the harvester need to be felled motor manually before being winched to the skid trail, for example using a remote-controlled mini forestry crawler (MFC). They are only a few local studies which have evaluated the performance of such MFCs. The use of MFCs for wood extraction operations in mixed soft- and hardwood stands is presented in this study conducted in Southwestern Germany. The aim of this study was to analyze the productivity, costs, and selected environmental impacts of mini forestry crawlers during winching operations through a time study. Using statistical regression, time consumption was analyzed in order to determine significant explanatory variables. Environmental impacts were evaluated using the life cycle assessment (LCA) methodology with Umberto software. The mean net cycle time was 4.82 min and the net productivity rate was 7.77 m³ by productive machine hour (PMH₀). Explanatory variables which significantly affected the net cycle time were the winched volume, the number of trees per load, and winching distance. Environmental analysis showed that inputs of fossil energy were mostly due to diesel and lubricant consumption. Raw materials for machine manufacture and maintenance showed the highest impact in human toxicity potential category. The MFCs showed good environmental performances, but the harvesting system should become more productive in order to be more cost effective.

The estimation of forest biomass is gaining interest not only for calculating harvesting volumes but also for carbon storage estimation. However, bark (and carbon) compounds are not distributed equally along the stem. Particularly when looking at Scots pine, a radical change in the structure of the bark along the stem can be noted. At the bark transition area, the bark changes from thick and rough to thin and smooth. The aim of our study was (1) to analyze the height of the bark transition area where the bark structure changes and (2) to analyze the effect of cardinal direction on the bark thickness. Regression analyses and forward selection were performed including measured tree height, DBH, bark thickness, crown base height and upper and lower heights of the bark transition areas of 375 trees. While the cardinal direction had no effect on bark thickness, DBH was found to have a significant effect on the heights of the bark transition areas, with stand density and tree height having a minor additional effect. These variables can be used to estimate timber volume (without bark) with higher accuracy and to predict the carbon storage potential of forest biomass according to different tree compartments and compounds.

Within the wood supply chain, the measurement of roundwood plays a key role due to its high economic impact. While wood industry mainly processes the solid wood, the bark mostly remains as an industrial by-product. In Central Europe, it is common that the wood is sold over bark but that the price is calculated on a timber volume under bark. However, logs are often measured as stacks and, thus, the volume includes not only the solid wood content but also the bark portion. Mostly, the deduction factors used to estimate the solid wood content are based on bark thickness. The aim of this study was to compare the estimation of bark volume from scaling formulae with the real bark volume, obtained by xylometric technique. Moreover, the measurements were performed using logs under practice conditions and using discs under laboratory conditions. The mean bark volume was 6.9 dm³ and 26.4 cm³ for the Norway spruce logs and the Scots pine discs respectively. Whereas the results showed good performances regarding the root mean square error, the coefficient of determination (R²) and the mean absolute error for the volume estimation of the total volume of discs and logs (over bark), the performances were much lower for the bark volume estimations only.

In terms of assessing economic impact, one of the most important elements in the wood supply chain is the measurement of round wood. Besides the one-by-one measurement of logs, logs are often measured when stacked at the forest road. The gross stacked volume includes the volume of the wood, bark and airspace and is widely used for industrial wood assortments. The increasing international attention given to photo-optical measurement systems for portable devices is due to their simplicity of use and efficiency. The aim of this study was to compare the gross volumes of hardwood log stacks measured using one widespread photo-optical app with two manual section-wise volume estimations of log stacks based on the German framework agreement for timber trade (RVR). The manual volume estimations were done starting from the left (RVR) and right (RVR) sides of the log stacks. The results showed an average deviation of the photo-optical gross volume estimation in comparison to the manual estimation of –2.09% (RVR) and –3.66% (RVR) while the deviation between RVR and RVR was +2.54%. However, the log stack gross volume had a highly significant effect on the deviation and better accuracy with smaller deviation were reached for larger log stacks. Moreover, results indicated that the gross volume estimations of higher quality log stacks were closer for the three analyzed methods compared to estimations of poor-quality log stacks.left right left right left right

In order to accommodate foreseen climate change in European forests, the following are recommended: (i) to increase the number of tree species and the structural diversity; (ii) to replace unsuitable species by native broadleaved tree species, and (iii) to apply close-to-nature silviculture. The state forest department of Baden-Württemberg (BW) currently follows the concept of Forest Development Types (FDTs). However, future climatic conditions will have an impact on these types of forest as well as timber harvesting operations. This Geographic Information System (GIS)-based analysis identified appropriate locations for main FDTs and timber harvesting and extraction methods through the use of species suitability maps, topography, and soil sensitivity data. Based on our findings, the most common FDT in the state forest of BW is expected to be coniferous-beech mixed forests with 29.0% of the total forest area, followed by beech-coniferous (20.5%) and beech-broadleaved (15.4%) mixed forests. Where access for fully mechanized systems is not possible, the main harvesting and extraction methods would be motor manual felling and cable yarding (29.1%). High proportions of large dimensioned trees will require timber extraction using forestry tractors, and these will need to be operated from tractor roads on sensitive soils (23.0%), and from skid trails on insensitive soils (18.4%).

As a land use management system, agroforestry has environmental, economic and societal benefits over conventional agriculture or forestry. Important benefits of combining tree growth with agricultural crops and/or forage production systems include higher biodiversity through more diverse habitats, the control of runoff and soil erosion, the augmentation of soil water availability, the creation of microclimates, carbon sequestration and provision of a more diverse farm economy. As the climate changes, north eastern Germany is likely to be particularly prone to severe effects from droughts and wind erosion in the future. However, the area of land under agroforestry makes up less than 2% of the total agricultural area in Germany. Through qualitative interviews with key actors, this study analyzed the benefits of, potentials for and barriers to implementing agroforestry systems in the federal state of Brandenburg. Results showed that agroforestry systems have significant potential in relation to several benefits, particularly the mitigation of soil erosion and stabilization of microclimate regimes. Additionally, agroforestry has the potential to provide wood for energy production or material uses. Although a small but highly innovative and interlinked community exists, administrative barriers and high start-up costs currently hamper the transition from conventional agriculture to agroforestry systems.