In this work, two Ni-based superalloys with 13 wt.% and 35 wt.% Co were prepared via selective laser melting (SLM), and the effects of Co on the microstructure and mechanical properties of the additively manufactured superalloys were investigated. As the Co fraction increased from 13 wt.% to 35 wt.%, the average grain size decreased from 25.69 μm to 17.57 μm, and the size of the nano-phases significantly increased from 80.54 nm to 230 nm. Moreover, the morphology of the γ′ phase changed from that of a cuboid to a sphere, since Co decreased the γ/γ′ lattice mismatch from 0.64% to 0.19%. At room temperature, the yield strength and ultimate tensile strength of the 13Co alloy reached 1379 MPa and 1487.34 MPa, and those of the 35Co alloy were reduced to 1231 MPa and 1350 MPa, while the elongation increased by 52%. The theoretical calculation indicated that the precipitation strengthening derived from the γ′ precipitates made the greatest contribution to the strength.

In this work, a method concerning thermal consolidation is proposed to simulate the traditional powder metallurgy process and accomplish the composition screening of powder metallurgy Ni-based superalloys U720Li and RR1000 with rare metal scandium, and superalloys with zero scandium addition, medium scandium addition and high scandium addition are selected. Then effects of scandium on the microstructure and mechanical properties of superalloys are further investigated through fast hot pressed sintering. The results indicate that scandium doping can effectively refine the grain through modifying the size and volume fraction of primary γ’ precipitates at the grain boundary. Meanwhile, scandium can promote the growth and precipitation of secondary γ’ precipitates to some extent. Due to the comprehensive effects of γ’ precipitate modification and grain boundary strengthening, as-sintered U720Li with 0.043 wt.% scandium presents an excellent combination of tensile strength and ductility at ambient and elevated temperature while as-sintered RR1000 with 0.064 wt.% scandium has a good performance at elevated temperature.