Highly porous open-cell carbon materials have great potential for use as high-temperature thermal insulation for space vehicles due to a unique combination of properties: low density, high rigidity, sufficient compressive strength, and low thermal conductivity. The physical properties of these materials essentially depend on their microstructure. This implies the possibility of constructing a new advanced technique for the optimal design of multilayer thermal protection systems for aerospace vehicles, taking into account the dependence of materials’ thermal properties on microstructure. The formulation of the optimization problem traditional to thermal design implies the determination of the layer thicknesses that provide a minimum specific mass of the thermal protection, subject to the specified constraints on the maximum temperatures in the layers. The novelty of this work lies in the fact that, along with the thickness of the layers, the design parameters include the cell diameter and porosity, which characterize the structure of highly porous cellular materials. The innovative part of the presented paper lies in the determination of cell diameter and the porosity of open-cell carbon foam together with the thickness of the layers for multilayer thermal insulation, ensuring the required operational temperature on the boundaries of the layers and a minimum of the total mass of the system. This article reveals new possibilities for using the numerical optimization method to determine the geometric parameters of the thermal protection system and the morphology of the materials used. A new methodology for designing heat-loaded structures based on the simultaneous selection of macro- and micro-parameters of the system is proposed. The basic principles of constructing an algorithm for designing a multilayer thermal protection system are outlined, taking into account the possibility of choosing the parameters of the highly porous materials’ structure. The reliability of the developed optimization method was verified by comparing the results of mathematical modeling with experimental data obtained for highly porous cellular materials with known microstructure parameters.
Inverse heat transfer problems are used to study the thermophysical properties of promising highly porous cellular materials. The article presents the results of thermal tests on samples of these materials with different structures determined by the diameter of the cells. The thermophysical characteristics of the samples were obtained, which can be used to construct and verify mathematical models of heat transfer in highly porous cellular materials.
1 December 2024 in Journal of Engineering Thermophysics
Thermal protection of spacecraft experiences significant thermal loads and requires optimal designing, in terms of both technological and mass characteristics. Carbon aerogels are great interest for development of light high-temperature thermal insulation materials. Introducing them into the structure of composites enables reducing the radiative component of thermal conductivity at high temperatures due to the high extinction coefficient of carbon aerogels in the infrared range. As reinforcing fillers in such materials, highly porous cellular materials can be used, which give the composite sufficient mechanical strength. The physical properties of composites depend strongly on the microstructure of the reinforcing fillers. Therefore, multilayer thermal shield can be designed with choosing, along with the layer thicknesses, the material structure parameters that are optimal for the specific operating conditions of the spacecraft under development. The article presents an algorithm for optimally designing multilayer thermal insulation based on a carbon cellular material filled with aerogel subject to the dependence of the thermophysical properties on the microstructure of the cellular material. Practical application is illustrated with a problem of designing a three-layer thermal shield for a solar probe.
Данная работа посвящена исследованию теплофизических свойств перспективных высокопористых ячеистых материалов методами обратных задач теплообмена. Представлены результаты тепловых испытаний образцов данных материалов с разной структурой, определяемой диаметром ячеек. Получены теплофизические характеристики образцов, которые могут быть использованы для построения и верификации математических моделей теплообмена в высокопористых ячеистых материалах.
30 November 2024 in Journal of Engineering Physics and Thermophysics