Purpose: The main purpose of this study, reflecting mainly the content of the authors’ plenary lecture, is to make a brief overview of several approaches developed by the author and his colleagues to the solution to ill-posed inverse heat transfer problems (IHTPs) with their possible extension to a wider class of inverse problems of mathematical physics and, most importantly, to show the wide possibilities of this methodology by examples of aerospace applications. In this regard, this study can be seen as a continuation of those applications that were discussed in the lecture.Design/methodology/approach: The application of the inverse method was pre-tested with experimental investigations on a special test equipment in laboratory conditions. In these studies, the author used the solution to the nonlinear inverse problem in the conjugate (conductive and convective) statement. The corresponding iterative algorithm has been developed and tested by a numerical and experimental way.Findings: It can be stated that the theory and methodology of solving IHTPs combined with experimental simulation of thermal conditions is an effective tool for various fundamental and applied research and development in the field of heat and mass transfer.Originality/value: With the help of the developed methods of inverse problems, the investigation was conducted for a porous cooling with a gaseous coolant for heat protection of the re-entry vehicle in the natural environment of hypersonic flight. Moreover, the analysis showed that the inverse methods can make a useful contribution to the study of heat transfer at the surface of a solid body under the influence of the hypersonic heterogeneous (dusty) gas stream and in many other aerospace applications.
Highly porous open-cell carbon materials have great potential for use as high-temperature thermal insulation for space vehicles due to a unique combination of properties: low density, high rigidity, sufficient compressive strength, and low thermal conductivity. The physical properties of these materials essentially depend on their microstructure. This implies the possibility of constructing a new advanced technique for the optimal design of multilayer thermal protection systems for aerospace vehicles, taking into account the dependence of materials’ thermal properties on microstructure. The formulation of the optimization problem traditional to thermal design implies the determination of the layer thicknesses that provide a minimum specific mass of the thermal protection, subject to the specified constraints on the maximum temperatures in the layers. The novelty of this work lies in the fact that, along with the thickness of the layers, the design parameters include the cell diameter and porosity, which characterize the structure of highly porous cellular materials. The innovative part of the presented paper lies in the determination of cell diameter and the porosity of open-cell carbon foam together with the thickness of the layers for multilayer thermal insulation, ensuring the required operational temperature on the boundaries of the layers and a minimum of the total mass of the system. This article reveals new possibilities for using the numerical optimization method to determine the geometric parameters of the thermal protection system and the morphology of the materials used. A new methodology for designing heat-loaded structures based on the simultaneous selection of macro- and micro-parameters of the system is proposed. The basic principles of constructing an algorithm for designing a multilayer thermal protection system are outlined, taking into account the possibility of choosing the parameters of the highly porous materials’ structure. The reliability of the developed optimization method was verified by comparing the results of mathematical modeling with experimental data obtained for highly porous cellular materials with known microstructure parameters.
Purpose: The purpose of this study is to optimize multilayer vacuum thermal insulation (MLI) of modern high-weight spacecrafts. An adequate mathematical simulation of heat transfer in the MLI is impossible if there is no available information on the main insulation properties. Design/methodology/approach: The results of experiments in thermo-vacuum facilities are used to re-estimate some radiative properties of metallic foil/metalized polymer foil and spacer on the basis of the inverse problem solution. The experiments were carried out for the sample of real MLI used for the BP-Colombo satellite (ESA). The recently developed theoretical model based on neglecting possible near-field effects in radiative heat transfer between closely spaced aluminum foils was used in theoretical predictions of heat transfer through the MLI. Findings: A comparison of the computational results and the experimental data confirms that there are no significant near-field effects between the neighboring MLI layers. It means that there is no considerable contradiction between the far-field model of radiative transfer in MLI and the experimental estimates. Originality/value: An identification procedure for mathematical model of the multilayer thermal insulation showed that a modified theoretical model developed recently can be used to estimate thermal properties of the insulation at conditions of space vacuum.