The temperature control system is one of the most important subsystems of the strapdown airborne gravimeter. Because the quartz flexible accelerometer based on springy support technology is the core sensor in the strapdown airborne gravimeter and the magnet steel in the electromagnetic force equilibrium circuits of the quartz flexible accelerometer is greatly affected by temperature, in order to guarantee the temperature control precision and minimize the effect of temperature on the gravimeter, the SGA-WZ temperature control system adopts a three-level control method. Based on the design experience of the SGA-WZ-01, the SGA-WZ-02 temperature control system came out with a further optimized design. In 1st level temperature control, thermoelectric cooler is used to conquer temperature change caused by hot weather. The experiments show that the optimized stability of 1st level temperature control is about 0.1 °C and the max cool down capability is about 10 °C. The temperature field is analyzed in the 2nd and 3rd level temperature control using the finite element analysis software ANSYS. The 2nd and 3rd level temperature control optimization scheme is based on the foundation of heat analysis. The experimental results show that static accuracy of SGA-WZ-02 reaches 0.21 mGal/24 h, with internal accuracy being 0.743 mGal/4.8 km and external accuracy being 0.37 mGal/4.8 km compared with the result of the GT-2A, whose internal precision is superior to 1 mGal/4.8 km and all of them are better than those in SGA-WZ-01.

With the expansion of the exploration scope of underwater vehicles and the improvement of their safety requirements, integrated navigation under passive conditions has become a hot topic in the field of navigation. Due to the stability and detectability of the Earth’s gravity field, the use of a matching result for external correction of inertial navigation systems (INSs) can be effective. For practical navigation applications, an inertial gravity matching integrated navigation algorithm must be designed for real-time applicability, diversified output information capability, and anti-interference capability. In this paper, an INS/gravity matching (INS-GM) integrated navigation algorithm is improved to extract the information of gravity fields in real time and correct the navigation results, and a robust integrated algorithm is proposed. Through two-hierarchy filtering, correction of the gravity field to the carrier position and of the integrated navigation system is obtained. According to the first-hierarchy filtering noise characteristics of gravity matching, the robustness of the algorithm to a complex environment is improved by second-hierarchy filtering. The ocean experiment data processing results show that the algorithm can effectively handle a certain degree of initial error, and an integrated navigation accuracy of 205 m is achieved in a good experimental environment. In the case of severe test conditions, the accuracy of the robust integrated navigation algorithm is 72% higher than that of the ordinary navigation algorithm, and it has a strong anti-jamming ability, which can meet the requirements of marine inertial gravity matching integrated navigation tasks.

In March 2015, a ground vehicle gravimetry test was implemented in eastern Changsha to assess the repeatability and accuracy of ground vehicle SINS/GNSS gravimeter—SGA-WZ02. The gravity system developed by NUDT consisted of a Strapdown Inertial Navigation System (SINS), a Global Navigation Satellite System (GNSS) remote station on test vehicle, a GNSS static master station on the ground, and a data logging subsystem. A south-north profile of 35 km along the highway in eastern Changsha was chosen and four repeated available measure lines were obtained. The average speed of a vehicle is 40 km/h. To assess the external ground gravity disturbances, precise ground gravity data was built by CG-5 precise gravimeter as the reference. Under relative smooth conditions, internal accuracy among repeated lines shows an average agreement at the level of 1.86 mGal for half wavelengths about 1.1 km, and 1.22 mGal for 1.7 km. The root-mean-square (RMS) of difference between calculated gravity data and reference data is about 2.27 mGal/1.1 km, and 1.74 mGal/1.7 km. Not all of the noises caused by vehicle itself and experiments environments were eliminated in the primary results. By means of selecting reasonable filters and improving the GNSS observation conditions, further developments in ground vehicle gravimetry are promising.

Compensation of gravity disturbance can improve the precision of inertial navigation, but the effect of compensation will decrease due to the accelerometer bias, and estimation of the accelerometer bias is a crucial issue in gravity disturbance compensation. This paper first investigates the effect of accelerometer bias on gravity disturbance compensation, and the situation in which the accelerometer bias should be estimated is established. The accelerometer bias is estimated from the gravity vector measurement, and a model of measurement noise in gravity vector measurement is built. Based on this model, accelerometer bias is separated from the gravity vector measurement error by the method of least squares. Horizontal gravity disturbances are calculated through EGM2008 spherical harmonic model to build the simulation scene, and the simulation results indicate that precise estimations of the accelerometer bias can be obtained with the proposed method.

The use of Global Navigation Satellite System (GNSS) data for land vehicle gravimetry tests is challenged by complicated environments. A new approach for land vehicle gravimetry using a Strapdown Inertial Navigation System and velometer-integrated navigation computation (SINS/VEL) without using GNSS information has been put forward. Aided by the velometer with continuous longitudinal velocity output instead of GNSS signals, a SGA-WZ02 strapdown gravimeter that used the SINS/VEL method was tested in 2015. Four repeated lines were measured along a south-north direction highway in Eastern Changsha to verify the new method’s feasibility and performance. The gravity disturbance results showed an internal accuracy in scalar gravimetry about 1.17 mGal and 1.91 mGal for external accuracy assessment, with a spatial resolution of 1.7 km. Comparing this new method with the traditional SINS/GNSS gravimetry approach, it appeared that the results using SINS/VEL showed comparable internal and external accuracy. Theoretical analysis and practical test results showed that the new method was feasible for gravity determination by land dynamic vehicle.