chaoda chen

Prof. Dr. chaoda chen


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 November 2023 in Coatings
Verified
Journal Article
Open access
PDF file
CCchaoda chen
chaoda chen
SWShaofang Wu
Shaofang Wu
HWHao Wu
Hao Wu
LSLiang Shan
Liang Shan
KLKangxing Li
Kangxing Li
SWSiyang Wu
Siyang Wu
As a novel microfabrication method, electrochemical discharge machining has remarkable effects on the forming and processing of brittle and hard materials and non-conductive materials, but little research has been done on the electrochemical discharge mode in the jet state. To fulfil the potential of this technology, innovative research on the discharge characteristics and mechanism of electrochemical discharge machining in the jet mask is proposed. A high-speed camera observation experiment was set up to record the process of the jet flow column discharge formation and penetration. Changes in the electric field of the electrolytic jet channel were analysed by simulation software, and the morphology of the machined micro-pits was observed using a microscope. A mathematical derivation of the dielectric electric field in the gas–liquid two-phase jet column reveals the mechanism of discharge channel formation in the jet state. The experiments show that when the processing voltage is 400 V, a stable continuous spark appears, realizing the unique characteristics of a large-gap long-distance discharge and a flat small circle-shaped discharge mark produced at the bottom of the crater. The actual field strength within the bubble of this model obtained by mathematical derivation is approximately 61.5 kV/cm greater than the critical field strength for air bubble breakdown in the standard state, where bubble breakdown occurs in the discharge.

20 November 2025 in Coatings
Verified
Journal Article
Open access
PDF file
CCchaoda chen
chaoda chen
XLXuan Lu
Xuan Lu
RHRenfei Hu
Renfei Hu
ZXZeping Xiao
Zeping Xiao
RCRulin Chen
Rulin Chen
JYJindong Yu
Jindong Yu
The surface roughness of fused deposition modeling (FDM) parts severely limits their applications. Ironing, as an effective method to enhance surface quality, exhibits unclear interactions among its process parameters and lacks defined optimal process windows for different materials. To address this, this study employs a simulation to reveal the influence of ironing speed on the temperature field. Combining single-factor experiments with response surface methodology, predictive models for the surface roughness of PLA and ABS are established. Results indicate significant parameter interactions: PLA roughness is primarily governed by the interaction between ironing speed and ironing flow, while ABS roughness is co-influenced by the main effects of all three parameters (ironing speed, ironing flow, and ironing line spacing) as well as the interactions between speed and flow, and speed and line spacing. After optimization, the optimal surface roughness Ra values for PLA and ABS parts reached 0.852 μm and 1.014 μm, respectively. This study clarifies the dependence of ironing process effectiveness on material properties at the experimental optimization level, providing a theoretical basis for precise control of the FDM ironing process.

17 July 2024 in Coatings
Verified
Journal Article
Open access
PDF file
CCchaoda chen
chaoda chen
晓邵晓强 邵
晓强 邵
JGJunrong Guo
Junrong Guo
PPPengyuan Peng
Pengyuan Peng
ZCZiyang Chen
Ziyang Chen
ZJZhansi Jiang
Zhansi Jiang
Surface microstructures formed by jet electrolytic processing are widely used in aerospace and biomedical applications, and their unique process has an important role in medical devices. To improve the precision and usability of medical devices processed using this process, electrolytic characterization and micropit morphology experiments under different processing parameters were carried out to study the effect of EJM processing on processing efficiency and processing quality. The influencing factors of electrolytic machining rate were deduced by electrochemical theory, the electric field simulation was carried out using Comsol to analyze the electric field distribution and current density profile in the micropit, and the actual machining micropit was measured using a scanning microscope. The experiments show that increasing the peak voltage, reducing the machining gap, and extending the machining time can increase the depth of the micropit by 20%–40% and reduce the height of the silo by 45%–65%, which can effectively improve the surface structure of the medical device.

21 July 2023 in Coatings
Verified
Journal Article
Open access
PDF file
CCchaoda chen
chaoda chen
SWShaofang Wu
Shaofang Wu
TZTong Zhang
Tong Zhang
YWYa ge Wang
Ya ge Wang
XSXiaoqiang Shao
Xiaoqiang Shao
FMFengrong Mo
Fengrong Mo
There has been some research on jet electrolytic processing at home and abroad, and the phenomenon of discharge during the process has been reported, but there has been little research on the mode of jet electrolysis with the aid of discharge. A jet mask electrolytic processing experiment was set up to prepare a blue oil mask on the surface of the workpiece using photolithography; two processing modes were achieved using different tool electrodes, the workpiece was processed by two types of motion, the processing micro-pits were observed morphologically using an optical microscope, and the test data were analyzed by plotting graphs. Experiments show that a blue oil mask with a thickness of 50 μm covers the workpiece to strengthen the fixity, and that jet electrolytic discharge machining can effectively improve the depth-to-width ratio by increasing the contribution to depth by 30%–38% and the contribution to width by 2%–18%, compared to jet electrolytic machining. The former has less island effect than the latter, with a flatter bottom and better-machined shape.

22 December 2024 in Coatings
Verified
Journal Article
Open access
PDF file
CCchaoda chen
chaoda chen
PPPengyuan Peng
Pengyuan Peng
晓邵晓强 邵
晓强 邵
BZBaojian Zou
Baojian Zou
BXBiaoqing Xu
Biaoqing Xu
TZTang Zhenyu
Tang Zhenyu
Masked jet electrolytic machining has the advantages of high machining efficiency and good surface morphology, giving it important applications in fields such as bionic marine animal manufacturing. The factors affecting the electrolytic machining speed are deduced; a modeling simulation is carried out by COMSOL software; the electrolyte potential map and current density line map inside the microgroove are analyzed; and measurements of the actual machined microgroove are made by a scanning microscope to carry out the experiments of electrolytic characteristics and morphology of the microgroove under different pulse voltages, machining gaps, and machining times. Experiments show that the pulse voltage plays a dominant role in processing, and when the pulse voltage is increased from 50 V to 125 V, the microgroove width increases by an average of 7.7%, and the depth increases by an average of 28.8%, which significantly improves the surface microstructure of the bionic marine animal.