In practical dielectrophoretic cell interaction experiments, cells do not always exhibit circular or rod-like shapes, making the study of dielectrophoretic interactions among irregularly shaped particles of significant importance. We established a mathematical model for curved particles to analyze their mutual dielectrophoretic interactions, incorporating particle deformability by varying their shear modulus, and employed the arbitrary Lagrangian–Eulerian method to describe particle motion and deformation. The results demonstrate that under the influence of a direct current electric field, curved particles undergo rotation, deformation, and mutual attraction due to dielectrophoresis, eventually forming a stable alignment parallel to the applied electric field. Adjusting the electric field strength effectively modulates the interaction intensity and movement velocity between particles. This study elucidates the fundamental principles governing dielectrophoretic interactions among deformable curved particles in DC electric fields, providing theoretical guidance for dielectrophoretic manipulation experiments involving biological cells, metallic particles, and other entities under DC electric fields.
There has been some research on jet electrolytic processing at home and abroad, and the phenomenon of discharge during the process has been reported, but there has been little research on the mode of jet electrolysis with the aid of discharge. A jet mask electrolytic processing experiment was set up to prepare a blue oil mask on the surface of the workpiece using photolithography; two processing modes were achieved using different tool electrodes, the workpiece was processed by two types of motion, the processing micro-pits were observed morphologically using an optical microscope, and the test data were analyzed by plotting graphs. Experiments show that a blue oil mask with a thickness of 50 μm covers the workpiece to strengthen the fixity, and that jet electrolytic discharge machining can effectively improve the depth-to-width ratio by increasing the contribution to depth by 30%–38% and the contribution to width by 2%–18%, compared to jet electrolytic machining. The former has less island effect than the latter, with a flatter bottom and better-machined shape.
2 April 2026 in Frontiers in Bioengineering and Biotechnology
Background: Existing spinal rehabilitation mechanisms present several limitations. These include a restricted range of motion, low flexibility, and suboptimal comfort. Methodology: To overcome these issues, a novel rigid-flexible coupled spine parallel rehabilitation mechanism is proposed. The mechanism is supported by a compression spring to enhance adaptability and comfort. Initially, a simplified skeletal-muscular model of spinal motion was developed based on human spine analysis. Subsequently, a mathematical model describing the system’s kinematics was established. Results: Analysis of the model indicated that, under a 120 N force applied by the anterior deltoid fascicle, the mechanism exhibited a maximum deformation of 6.40 mm, meeting the design expectations. In both simulations and experimental tests of forward flexion, the maximum lumbar dorsal forward flexion angle reached 68.6°. The maximum lateral flexion angle achieved was 60.4°, while the maximum rotational angle reached 58.5°. The average maximum movement speed across different volunteers was 14.94°/s, closely aligning with the design target of 14.90°/s. Experimental measurements of the device’s activity angles showed averages of 37.6° for forward flexion, 13.56° for backward flexion, 13.62° for lateral flexion (left/right), and 17.5° for rotation (left/right). All measured values were within, or closely approximated, the design range targets. Conclusion: The study determined both the physiological movement range of the human spine and the effective working space of the proposed mechanism. The results confirm the rationality and effectiveness of the mechanism’s design.