The paper reports an absorption–transmission multifunctional tunable metamaterial based on graphene. Its pattern graphene layer can achieve broadband absorption, while the frequency selective layer can achieve the transmission of specific band. Furthermore, the absorption and transmission can be controlled by applying voltage to regulate the chemical potential of graphene. The analysis results show that the absorption of the metamaterial is adjustable from 22% to 99% in the 0.72 THz~1.26 THz band and the transmittance is adjustable from 80% to 95% in 2.35 THz. The metamaterial uses UV glue as the dielectric layer and PET (polyethylene terephthalate) as the flexible substrate, which has good flexibility. Moreover, the metamaterial is insensitive to incident angle and polarization angle, which is beneficial to achieve excellent conformal properties.

Terahertz metamaterials are some of the core components of the new generation of high-frequency optoelectronic devices, which have excellent properties that natural materials do not have. The unit structures are generally much smaller than the wavelength, so preparation is mainly based on semiconductor processes, such as coating, photolithography and etching. Although the processing resolution is high, it is also limited by complex processing, long cycles, and high cost. In this paper, a design method for dual-band terahertz metamaterials and a simple, rapid, low-cost metamaterial preparation scheme based on step-motor-driven electrohydrodynamic jet technology are proposed. By transforming an open-source 3D printer, the metamaterial structures can be directly printed without complex semiconductor processes. To verify effectiveness, the sample was directly printed using nano conductive silver paste as consumable material. Then, a fiber-based multi-mode terahertz time-domain spectroscopy system was built for testing. The experimental results were in good agreement with the theoretical simulation.