Lithium-ion batteries (LIBs) are widely used in electric vehicles (EV) and energy storage stations (ESS). However, combustion and explosion accidents during the thermal runaway (TR) process limit its further applications. Therefore, it is necessary to investigate the uncontrolled TR exothermic reaction for safe battery system design. In this study, different LIBs are tested by lateral heating in a closed experimental chamber filled with nitrogen. Moreover, the relevant thermal characteristic parameters, gas composition, and deflagration limit during the battery TR process are calculated and compared. Results indicate that the TR behavior of NCM batteries is more severe than that of LFP batteries, and the TR reactions becomes more severe with the increase of energy density. Under the inert atmosphere of nitrogen, the primarily generated gases are H₂, CO, CO₂, and hydrocarbons. The TR gas deflagration limits and characteristic parameter calculations of different cathode materials are refined and summarized, guiding safe battery design and battery selection for power systems.

Growing environmental concerns have prompted the shipping industry to adopt stringent measures to address greenhouse gas emissions, with fuel-powered ships being the primary source of such emissions. Additionally, alternative forms of ship propulsion, such as internal combustion engine hybridization, low-carbon fuels, and zero-carbon fuels, face significant challenges either in terms of cost or emission-reduction capability at present. In order to decarbonize navigation, countries are focusing the maritime industry’s transition towards low-carbon alternatives on transforming energy consumption, with widespread attention on the electrification of ships. Therefore, this paper provides a comprehensive review of the feasibility of fully electrifying ships, covering aspects such as technological prospects, economic viability, and emission-reduction capabilities. Firstly, the current state of research on ship electrification technology is summarized; the applicability of different battery types to electric ship technology is compared. Subsequently, the economic viability and emission-reduction capabilities of five different electric ship lifecycles are discussed separately. The results indicate that ship electrification is a key pathway to achieving zero-emission shipping, with lithium-ion batteries being the most suitable battery technology for maritime use currently. Short-to-medium-range electric ship types have demonstrated economic advantages over traditional diesel ships. As battery costs continue to decline and energy density keeps improving, the economic feasibility of ship electrification is expected to expand.

Lithium batteries are being utilized more widely, increasing the focus on their thermal safety, which is primarily brought on by their thermal runaway. This paper’s focus is the energy storage power station’s 50 Ah lithium iron phosphate battery. An in situ eruption study was conducted in an inert environment, while a thermal runaway experiment was conducted utilizing sealed pressure containers and an external heating triggering mechanism. Both the amount of gas release and the battery’s maximum temperature were discovered. Using gas chromatography, the gas emission from the battery was examined. Its principal constituents included CO, H₂, CO₂, CH₄, C₂H₄, and so on. Moreover, the experiment discovered a second eruption of lithium iron phosphate, and the stage of its eruption was separated by the pressure signal of the sealed experimental chamber, giving a theoretical foundation and technological backing for the thermal catastrophe safety of lithium batteries.

With the widespread application of lithium-ion batteries (LIBs) energy storage stations in high-altitude areas, the impact of ambient pressure on battery thermal runaway (TR) behavior and venting flow characteristics have aroused wide research attention. This paper conducts a lateral heating experiment on 280 Ah lithium iron phosphate batteries (LFPs) and proposes a method for testing battery internal pressure using an embedded pressure sensor. This paper analyzes the battery characteristic temperature, internal pressure, chamber pressure, and gas components under different chamber pressures. The experiment is carried out in a N₂ atmosphere using a 1000 L insulated chamber. At 40 kPa, the battery experiences two instances of venting, with a corresponding peak in temperature on the battery’s side of 136.3 °C and 302.8 °C, and gas generation rates of 0.14 mol/s and 0.09 mol/s, respectively. The research results indicate that changes in chamber pressure significantly affect the center temperature of the battery side (T_s), the center temperature of the chamber (T_c), the opening time of the safety valve (t_open), the triggering time of TR (t_TR), the time difference (Δt), venting velocity, gas composition, and flammable limits. However, the internal pressure and gas content of the battery are apparently unaffected. Considering the TR characteristics mentioned above, a safety assessment method is proposed to evaluate the TR behavior and gas hazard of the battery. The results indicate that the risk at 40 kPa is much higher than the other three chamber pressures. This study provides theoretical references for the safe use and early warning of energy storage LIBs in high-altitude areas.