Rail corrugation is a degradation phenomenon that manifests as a quasi-periodic irregularity on the running surface of the rail. It is a critical problem for urban railway lines because it induces ground-borne vibrations transmitted to the buildings near the infrastructure, causing complaints from the inhabitants. A typical treatment to mitigate the rail corrugation problem is the periodic grinding of the rails, performed by dedicated vehicles. The scheduling of rail maintenance is particularly critical because it can be performed only when the service is interrupted. A procedure for the continuous monitoring of rail corrugation is proposed, based on axlebox acceleration measurements. The rail irregularity is estimated from the measured acceleration by means of a frequency domain model of vertical dynamics of the wheel–rail interaction. The results obtained by using two different methods (a state-of-the-art method and a new one) are compared. Finally, the study of the evolution of the power content of the rail irregularity enables the identification of the track sections where corrugation is developing and rail grinding is necessary.
11 October 2024 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Rail corrugation appears as a periodic irregularity on the rail running surface that causes severe dynamic loads at the wheel-rail interface. These dynamic forces may generate ground-borne vibrations that propagate from the line to the surrounding buildings causing discomfort to residents. Rail grinding is the most used countermeasure for the mitigation of corrugation. However, this maintenance operation determines high operative costs if frequently performed and must be carefully scheduled. To this end, it is important to assess the effectiveness of other mitigation solutions that may prevent or slow down its growth. The main objective of this study is to investigate the formation of rail corrugation on a sharp curve of the Cityringen underground line in Copenhagen. A wheel-rail interaction model is developed in the frequency domain to identify the root causes of the problem on the specific curve and predict the corrugation wavelength. Once the accuracy of the model is tested against experimental observations on the reference curve, it is used to explore the effectiveness of different mitigation actions, such as the use of friction modifiers, the variation of the speed, track design and track gauge. The results indicate that friction modifiers and speed variation are the most effective measures.
7 April 2025 in International Journal of Rail Transportation