The paper proposes a mathematical model of train–turnout interaction in the mid-frequency range (0–500 Hz). The model accounts for the effects of rail profile variation along the track and of local variation of track flexibility. The proposed approach is able to represent the condition of one wheel being simultaneously in contact with more than one rail, allowing the accurate prediction of the effect of wheels being transferred from one rail to another when passing over the switch toe and the crossing nose. Comprehensive results of train–turnout interaction during the negotiation of the main and the branch lines are presented, including the effect of wear of wheel/rail profiles and presence of track misalignment. In the final part of the paper, comparisons are performed between the results of numerical simulations and line measurements performed on two different turnouts for urban railway lines, showing a good agreement between experimental and numerical results.
1 May 2009 in Journal of Transportation Engineering
The short service life of rail turnouts and the related noise and vibration disturbance, are directly related to their dynamic distress. Especially in the case of urban rail systems, such problems are amplified due to the increased train frequency and the proximity to inhabited structures. This paper presents three new concepts for the reduction of noise and vibration produced by railway turnouts in urban railway lines, and provides an assessment of their performance. The effectiveness of the three new concepts is first evaluated analytically, using two different methodologies, earlier validated against line measurements on existing turnouts. Then, the actual performance of one of the three concepts, along with the effectiveness of the two analysis methodologies, is verified through real-scale measurements. Based on the presented analyses, all three new concepts are shown to provide a substantial enhancement of turnout performance. Furthermore, soil conditions and soil-structure interaction are shown to p...
Active primary/secondary suspensions have been proposed to solve the trade-off between curving and stability in railway vehicles. One concept is known as secondary yaw control (SYC), which consists of applying a controllable yaw torque between the carbody and the two bogies. This has been studied in the past mainly to enhance the vehicle's curving ability, but this paper extends the idea by examining the implications of designing a bogie with soft yaw stiffness between the bogie frame and the wheelsets and using SYC to provide active stabilisation. To this aim, a state feedback control law is designed according to the LQR technique. The paper presents the general concept of the active suspension control to be investigated and the specific control strategies applied. Then the effectiveness of the proposed actuation concept is investigated by means of numerical simulations performed on mathematical models of the passive and actively controlled vehicles implemented in a fully nonlinear multi-body simulator.
In this paper, a model-based approach for the identification of the railway vertical track alignment from simulation data is presented. The proposed methodology is based on the application of the unknown input observer algorithm. The model of a conventional train is used to simulate the acceleration levels that vehicle-mounted sensors (e.g., on the bogies and carbody) would measure during operation. Simulations are carried out at a constant speed on both straight and curved tracks, including different types of track geometry components (namely longitudinal level, alignment, and cross-level) to assess the algorithm capability to identify the input irregularity. The primary focus is on the identification of mean vertical track alignment, a critical irregularity component for safety issues. In the analysed cases, the comparison between the measured and reconstructed signal histories are quite satisfactory, with maximum errors in the order of 15% and 29% along straight and curved tracks. Comparing the frequency content of the signals, a significantly higher degree of accuracy is observed (with maximum errors of 5–10% depending on the track layout), which demonstrates that the proposed methodology is suitable for track irregularity identification and monitoring purposes using an instrumented vehicle.
1 July 2025 in International Journal of Rail Transportation