Bo Wu

Dr. Bo Wu


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2024 in Polymers
Verified
Journal Article
Open access
PDF file
CWChuanying Wei
Chuanying Wei
YZYan Zhang
Yan Zhang
ZTZhen Tang
Zhen Tang
CZChangan Zhang
Changan Zhang
JWJianhua Wu
Jianhua Wu
BWBo Wu
Bo Wu
Poly(dimethylsiloxane) (PDMS) coatings are considered to be environmentally friendly antifouling coatings. However, the presence of hydrophobic surfaces can enhance the adhesion rate of proteins, bacteria and microalgae, posing a challenge for biofouling removal. In this study, hydrophilic polymer chains were synthesised from methyl methacrylate (MMA), Poly(ethylene glycol) methyl ether methacrylate (PEG-MA) and 3-(trimethoxysilyl) propyl methacrylate (TPMA). The crosslinking reaction between TPMA and PDMS results in the formation of a silicone-based amphiphilic co-network with surface reconstruction properties. The hydrophilic and hydrophobic domains are covalently bonded by condensation reactions, while the hydrophilic polymers migrate under water to induce surface reconstruction and form hydrogen bonds with water molecules to form a dense hydrated layer. This design effectively mitigates the adhesion of proteins, bacteria, algae and other marine organisms to the coating. The antifouling performance of the coatings was evaluated by assessing their adhesion rates to proteins (BSA-FITC), bacteria (B. subtilis and P. ruthenica) and algae (P. tricornutum). The results show that the amphiphilic co-network coating (e.g., P-AM-15) exhibits excellent antifouling properties against protein, bacterial and microalgal fouling. Furthermore, an overall assessment of its antifouling performance and stability was conducted in the East China Sea from 16 May to 12 September 2023, which showed that this silicon-based amphiphilic co-network coating remained intact with almost no marine organisms adhering to it. This study provides a novel approach for the development of high-performance silicone-based antifouling coatings.

3 February 2022 in Surfaces
Verified
Journal Article
Open access
PDF file
HXHuang Xuerun
Huang Xuerun
CZChangjie Zhou
Changjie Zhou
BWBo Wu
Bo Wu
ZGZhiming Geng
Zhiming Geng
XZXing Zhang
Xing Zhang
Diamond offers great potential for use as a thermal spreader in various applications, including power electronics and radio-frequency (RF) applications. However, to be used as an efficient thermal spreader, the atomically smooth surface of the diamond is critical to be bonded with chips. Herein, a polishing technique for a 2-inch diameter wafer-scale bulk polycrystalline diamond substrate is proposed. In this work, 350 μm thick polycrystalline diamond is grown by the microwave plasma-assisted chemical vapor deposition (MPACVD) technique on a Si substrate at a growth rate of 8 µm/h. Thereafter, a three-step polishing process was applied to achieve an atomically smooth surface, consisting of grinding using a diamond slurry with an iron plate, ICP etching using the SF6 gas, and final mechanical polishing using a resin-bonded diamond wheel. Surface roughness of diamond characterized by atomic force microscopy showed the significantly reduced from 900 nm to 0.3 nm. Hence, this study provide the practical methods for obtaining atomically smooth diamond films suitable for thermal management in various areas including power electronics and RF devices.

19 April 2023 in Polymers
Verified
Journal Article
Open access
PDF file
YDYajun Deng
Yajun Deng
CZChangan Zhang
Changan Zhang
TZTao Zhang
Tao Zhang
BWBo Wu
Bo Wu
YZYanmei Zhang
Yanmei Zhang
JWJianhua Wu
Jianhua Wu
Waterborne polyurethane are more eco-friendly materials due to lower volatile organic compounds (VOCs, mainly isocyanates) content than the alternative materials. However, these rich hydrophilic groups polymers have not yet reached good mechanical properties, durability and hydrophobicity behaviors. Therefore, hydrophobic waterborne polyurethane has become a research hotspot, attracting significant attention. In this work, firstly, a novel fluorine-containing polyether P(FPO/THF) was synthesized by cationic ring-opening polymerization of 2-(2,2,3,3-tetrafluoro-propoxymethyl)-oxirane (FPO) and tetrahydrofuran (THF). Secondly, fluorinated polymer P(FPO/THF), isophorone diisocyanate (IPDI) and hydroxy-terminated polyhedral oligomeric silsesquioxane (POSS-(OH)8) were used to prepare a new fluorinated waterborne polyurethane (FWPU). Hydroxy-terminated POSS-(OH)8 was used as a cross-linking agent, while dimethylolpropionic acid (DMPA) and triethylamine (TEA) were used as a catalyst. Four kinds of waterborne polyurethanes (FWPU0, FWPU1, FWPU3, FWPU5) were obtained by adding different contents of POSS-(OH)8 (0%, 1%, 3%, 5%). The structures of the monomers and polymers were verified by 1H NMR and FT-IR, and the thermal stabilities of various waterborne polyurethanes were analyzed by thermogravimetric analyzer (TGA) and differential scanning calorimetry (DSC). As the results, the thermal analysis showed that the FWPU performed the good thermal stability and the glass transition temperature could reach at about −50 °C. The FWPU1 film exhibited that the elongation at break was 594.4 ± 3.6% and the tensile strength at break was 13.4 ± 0.7 MPa, elucidating that the FWPU1 film developed the excellent mechanical properties relative to the alternative FWPUs. Further, the FWPU5 film performed the promising properties, including the higher surface roughness of FWPU5 film (8.41 nm) obtained by the atomic force microscope (AFM) analysis, and the higher value of water contact angle (WCA) at 104.3 ± 2.7°. Those results illustrated that the novel POSS-based waterborne polyurethane FWPU containing a fluorine element could develop the excellent hydrophobicity and mechanical properties.