The uniaxial monotonic compressive stress-strain behavior and other characteristics of unreinforced masonry and its constituents, i.e., solid clay bricks and mortar, have been studied by several laboratory tests. Based on the results and observations of the comprehensive experimental study, nonlinear stress-strain curves have been obtained for bricks, mortar, and masonry and six “control points” have been identified on the stress-strain curves of masonry, which can also be used to define the performance limit states of the masonry material or member. Using linear regression analysis, a simple analytical model has been proposed for obtaining the stress-strain curves for masonry that can be used in the analysis and design procedures. The model requires only the compressive strengths of bricks and mortar as input data, which can be easily obtained experimentally and also are generally available in codes. Simple relationships have been identified for obtaining the modulus of elasticity of bricks, mortar, and ...
Masonry infill (MI) walls are remarkable in increasing the initial stiffness of reinforced concrete (RC) frames, and being the stiffer component, attract most of the lateral seismic shear forces on buildings, thereby reducing the demand on the RC frame members. However, behavior of MI is difficult to predict because of significant variations in material properties and because of failure modes that are brittle in nature. As a result, MI walls have often been treated as nonstructural elements in buildings, and their effects are not included in the analysis and design procedure. However, experience shows that MI may have significant positive or negative effects on the global behavior of buildings and, therefore, should be addressed appropriately. Various national codes differ greatly in the manner effects of MI are to be considered in the design process from aseismic performance point of view. This paper reviews and compares analysis and design provisions related to MI‐RC frames in seismic design codes of 16 countries and identifies important issues that should be addressed by a typical model code.
1 August 2009 in Journal of Structural Engineering
Strengthening of masonry-infilled reinforced concrete (RC) frame buildings with an open first story is needed because of the inherent irregularity in such buildings resulting in their poor performance as observed during several past earthquakes. In the present study, several strengthening schemes were evaluated for their effectiveness in improving the performance of such buildings, based on nonlinear analyses of typical RC frames. Instead of using predetermined multiplying factors for designing the first-story members for higher forces as recommended in some national codes, a rational method was developed for the calculation of the required increase in strength of open first-story columns. Other strengthening schemes studied were providing additional columns, diagonal bracings, and lateral buttresses in the open first story. Code methods were found to increase only lateral strength (and not the ductility) of such frames; whereas, some of the alternate schemes studied were found to improve both lateral str...
1 August 2015 in Journal of Materials in Civil Engineering