The heterogenous wireless services and exponentially growing traffic call for novel spectrum-and energy-efficient wireless communication technologies. Recently, a new technique, called symbiotic radio (SR), is proposed to exploit the benefits and address the drawbacks of cognitive radio (CR) and ambient backscattering communications (AmBC), leading to mutualism spectrum sharing and highly reliable backscattering communications. In particular, the secondary transmitter (STx) in SR transmits messages to the secondary receiver (SRx) over the RF signals originating from the primary transmitter (PTx) based on cognitive backscattering communications, thus the secondary system shares not only the radio spectrum, but also the power, and infrastructure with the primary system. In return, the secondary transmission provides beneficial multipath diversity to the primary system, therefore the two systems form mutualism spectrum sharing. More importantly, joint decoding is exploited at SRx to achieve highly reliable backscattering communications. In this paper, to exploit the full potential of SR, we provide a systematic view for SR and address three fundamental tasks in SR: (1) enhancing the backscattering link via active load; (2) achieving highly reliable communications through joint decoding; and (3) capturing PTx’s RF signals using reconfigurable intelligent surfaces. Emerging applications, design challenges and open research problems will also be discussed.

In a backscatter communication system, the backscatter device (BD) transmits its messages to the backscatter receiver (BR) by reflecting the incident signal from an external radio frequency (RF) emitter, instead of using power-hungry active RF components themselves. Thus, backscatter communication has shown great potential for achieving low-power communication. The double-fading effect associated with the backscatter link, however, is a major limiting factor to achieve efficient backscatter communication. Reconfigurable intelligent surfaces (RISs), a recently developed technology, can be applied at the BD to enhance the backscatter link thanks to the fact that both RIS and backscatter communication share the same reflective principle. Such a design can also allow the backscatter communication system to capture the desired RF signal as a reflective carrier in a complex radio environment. In this article, a comprehensive overview of backscatter communication assisted by RIS is given. We first introduce the basics of backscatter communication, which covers the antenna scattering principle, backscatter modulation, and link budget calculation. Then, the details of RIS are discussed, which include antenna-based RIS and metamaterial-based RIS, followed by the discussion of the roles of RIS in backscatter communication. After that, we provide an overview of three types of backscatter communication systems assisted by RIS, including RIS-assisted unmodulated backscatter communication, RIS-assisted ambient backscatter communication, and RIS-assisted symbiotic radio. Emerging applications of these systems, technical challenges, and future opportunities in this emerging field are also presented.

In this paper, a novel reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) symbiotic radio (SR) system is proposed, in which an RIS, operating as a secondary transmitter (STx), sends messages to a multi-antenna secondary receiver (SRx) by using cognitive backscattering communication, and simultaneously, it enhances the primary transmission from a multi-antenna primary transmitter (PTx) to a multi-antenna primary receiver (PRx) by intelligently reconfiguring the wireless environment. We are interested in the joint design of active transmit beamformer at the PTx and passive reflecting beamformer at the STx to minimize the total transmit power at the PTx, subject to the signal-to-noise-ratio (SNR) constraint for the secondary transmission and the rate constraint for the primary transmission. Due to the non-convexity of the formulated problem, we decouple the original problem into a series of subproblems using the alternating optimization method and then iteratively solve them. The convergence performance and computational complexity of the proposed algorithm are analyzed. Furthermore, we develop a low-complexity algorithm to design the reflecting beamformer by solving a backscatter link enhancement problem through the semi-definite relaxation (SDR) technique. Then, theoretical analysis is performed to reveal the insights of the proposed system. Finally, simulation results are presented to validate the effectiveness of the proposed algorithms and the superiority of the proposed system.

Ambient backscatter communication (AmBC) is a promising solution to energy-efficient and spectrum-efficient Internet of Things with stringent power and cost constraints. In an AmBC system, recovering the tag information at the reader, however, is a challenging task due to the difficulty in acquiring the relevant channel-state information (CSI). To eliminate the need to estimate the CSI, in this paper, we propose a label-assisted transmission framework, in which two known labels are transmitted from the tag before data transmission. By exploring the received signal constellation information, we propose modulation-constrained expectation maximization algorithm, based on which two detection methods are developed. One method, referred to as constellation learning with labeled signals, learns the parameters by clustering the labeled signals and recovers the unlabeled signals by the learnt parameters. The other method, referred to as constellation learning with labeled and unlabeled signals, uses all received signals in clustering. Efficient initialization techniques are provided for the two clustering algorithms. Finally, extensive simulation results show that the proposed constellation learning methods achieve comparable performance as the optimal detector with perfect CSI.

Cognitive ambient backscatter communication is a novel spectrum sharing paradigm, in which the backscatter system shares not only the same spectrum, but also the same radio-frequency source with the legacy system. Conventional energy detector (ED) suffers from severe error floor problem due to the existence of co-channel direct link interference (DLI) from the legacy system. In this paper, novel error-floor-free detectors are proposed to tackle the DLI using multiple receive antennas at the reader. First, beamforming-assisted ED and likelihood-ratio-based detector are proposed for backscatter symbol detection when the reader has perfect channel state information (CSI). Then a novel statistical clustering framework is proposed for joint CSI feature learning and backscatter symbol detection. Extensive simulation results have shown that the proposed methods can significantly outperform the conventional ED. In addition, the proposed clustering-based methods perform comparably as their counterparts with perfect CSI.

In this paper, we are interested in symbiotic radio networks (SRNs), in which an Internet-of-Things (IoT) network parasitizes in a primary cellular network to achieve spectrum-, energy-, and infrastructure-efficient communications. Each IoT device transmits its own information by backscattering the signals from the primary network without using active radio-frequency (RF) transmitter chain. We consider the symbiosis between the cellular network and the IoT network and focus on the user association problem in SRN. Specifically, the base station (BS) in the primary network serves multiple cellular users using time division multiple access (TDMA) and each IoT device is associated with one cellular user for information transmission. The objective of user association is to link each IoT device to an appropriate cellular user by maximizing the sum rate of all IoT devices. However, the difficulty in obtaining the full real-time channel information makes it difficult to design an optimal policy for this problem. To overcome this issue, we propose two deep reinforcement learning (DRL) algorithms, both use historical information to infer the current information in order to make appropriate decisions. One algorithm, referred to as centralized DRL, makes decisions for all IoT devices at one time with globally available information. The other algorithm, referred to as distributed DRL, makes a decision only for one IoT device at one time using locally available information. Finally, simulation results show that the two proposed DRL algorithms achieve performance comparable to the optimal user association policy which requires perfect real-time information, and the distributed DRL algorithm has the advantage of scalability.