Successful integration of growing number of energy-efficient electric vehicles (EV) into existing power grid necessitates the study of impacts posed by their adoption in larger numbers. However, their gradual adoption will give sufficient time to the utilities for planning the infrastructure upgrades to prevent destabilization of power network. The work presented in this paper investigates the proportion of energy that can be injected back into the grid by EVs through vehicle-to-grid (V2G) mechanism. The V2G energy profiles are obtained using constant power discharging approach for various power levels (as per charging standards) during the time vehicles are parked. For charging, constant power followed by constant time charging approach is used in succession complying with Li-ion battery charging characteristics together with a constraint of retaining reasonable battery lifetime. The simultaneous effect of V2G power and resulting G2V load on typical daily load curve is figured taking modified IEEE 30-bus as a test system.
A balanced operating power system with all elements carrying normal currents and bus voltages within the prescribed limits can be disrupted due to faults within the system. Overhead transmission networks are vulnerable to the vagaries of the atmosphere and, therefore, statistically have the highest probability of fault occurrence. Quick and accurate fault detections assist in timely remedial action, offering significant economic and operational benefits. Maintaining continuous and uninterrupted supply functionality is one of the critical objectives of electric utilities for a reliable system operation. Also, identifying and locating faults is crucial to address them in time to avert the risk of cascading failures. During faults, fast electromagnetic transients associated with the current and voltage waveforms can provide valuable insights into identifying abnormal operating conditions. To analyze these non-stationary signals in both the time and frequency domains, wavelet transform (WT) has become an indispensable tool. Thanks to its ability to adapt to variable window sizes, WT provides a more accurate and detailed resolution, making it a highly useful technique for signal analysis. In this context, this paper presents the application of WT-based intelligent technique to detect and classify power system faults accurately. The transient disturbances caused by various faults are subjected to wavelet transform analysis to analyze the detail coefficients of phase currents. The maximum detail coefficients of phase currents, which differ significantly when the system experiences a fault, served as the distinguishing feature to identify different power system faults. The phase current signals are analyzed with one of the wavelets from the Daubechies 4 (db4) family to obtain detail coefficients, thus enabling the categorization of the faults. Extensive simulation tests for fault types have been conducted on the standard IEEE 5-Bus system to demonstrate the technique’s effectiveness and fault detection capability, allowing utilities to take timely protective actions.
State of the art electric drive vehicles are one of the most encouraging automobile technologies to reduce our dependence on expensive, polluting fossil fuel based conventional vehicles. However, arises a new fear: the grid anxiety - whether the existing power grid, as it stands right now, will be able to handle the additional load put up by these vehicles. In this work, actual transportation statistics, together with two possible charging schemes - constant time and constant power for two charging levels of 3.3 and 6.6 kW, have been used to obtain the load profile of electric vehicles. The augmented charging load of electric vehicles may also affect the behavior of electricity market due to increase in total load. This paper analyzes the impact of vehicle's load on electricity market price in a day ahead market model. The constant time charging along with low charging power comes out to be an optimal scenario, when tested on a modified IEEE 30-Bus system.
This paper proposes a distinct vehicle-to-grid (V2G) and grid-to-vehicle (G2V) coordination model to utilize the controllability of electric vehicle (EV) battery storage system during the charging and discharging phases for load levelling. The aspect of the vehicles of changeable locations is taken as the basis to obtain a defined mobility pattern, with home and work being selected as the operational places to perform G2V and V2G activities. The presented approach assisted in achieving peak shaving and valley filling (MW) of a typical two-peak daily load curve of a real system to a considerable extent, thereby levelling the load and reducing the complexities associated with the forecasting and dispatch of the oscillating load. The reduction in the ramp up and ramp down energy and reserve requirements (MW), as well as the cost savings associated with reduced generation ramping commitments, as seen from system operator’s perspective, is quantified with the proposed schemes. Results demonstrate that the proposed approach is capable of flattening a realistic amount of load. The associated cost savings with reduced ramping requirements from traditional sources can be allocated to participating vehicles for providing the grid services. The benefits derived can encourage their adoption which is contained due to its expensiveness in the current market scenario, apart from increasing the grid reliability.