As the aging population of society continues to intensify, the series of problems brought about by aging is becoming more and more serious. Because the health problem of the elderly brings many social problems, people have paid close attention to it. Fortunately, as a typical smart healthcare system, wireless body area networks (WBANs) present quit nice medical care for people, especially the aged. However, personal health information is very sensitive. But, the common communication channel is used in WBANs and any malicious entity can initiate a security attack on WBANs. To ensure secure communication and privacy-preserving which are the premise of the sound development of WBANs, an improved and efficient certificateless authentication scheme with conditional privacy-preserving is proposed in this paper on the basis of analyzing the most recent presented certificateless authentication scheme for WBANs. The proposed scheme also provides batch authentication to decrease authentication and communication cost. A rigid security proof demonstrates that our proposed scheme resists every type of security attack and can provide condition privacy-preserving. The performance analysis shows that our proposed scheme has some advantages in computation and communication cost.
28 November 2022 in Frontiers in Environmental Science
The Bingham model can effectively describe the flow behavior of viscoplastic fluid. It is important to study the flow characteristics of Bingham fluid to understand the dynamic mechanism of viscous debris flow. In this study, the Bingham fluid flow on a slope is numerically researched using a corrected smooth particle hydrodynamics (CSPH) method based on periodic density re-initialization and artificial stress. First, the accuracy and stability of the improved SPH method are verified by the benchmark problem impacting droplets. Then, the flow characteristics of the Bingham fluid on the slope and the influence of the slope inclination angle on the Bingham fluid movement process are studied with the improved SPH method. The numerical results show that the improved SPH numerical scheme has higher accuracy and better stability and can deal with the complex flow behavior of the unsteady Bingham fluid.
11 June 2019 in International Journal of Distributed Sensor Networks
Vehicular ad hoc networks have emerged as a promising approach to increasing road safety and efficiency. Vehicles periodically broadcast traffic-related status messages. Message authentication is a common way for ensuring information reliability, but it is an unaffordable computational cost for single vehicle. In this article, we propose an efficient cooperative message authentication based on reputation mechanism. In the proposed scheme, reputation model is used to assess authentication efforts of vehicles, which enhances initiative for cooperative message authentication and inhabits selfish behavior; sequence optimization algorithm solves messages overflowing on condition limited computation of onboard unit and improves the speed of message authentication at the premise of ensuring the reliability of message authentication. Simulation results show that our scheme presents a nice performance of authentication efficiency, packet loss ratio, and missing detection ratio.
In many process engineering fields, gas-particle fluidized beds are widely used. In fluidized bed research, the discrete element method, or DEM, has been a powerful tool for design and operation purposes. However, with the use of Type-A powders, fluid catalytic cracking or FCC particles being classical cases, they have hardly been reported in DEM simulations of fast fluidization. This study paid close attention to the suitable selection of a stiffness constant and a DEM time step. To reflect their respective effects and complicated interactions, a so-called relative DEM time step was defined. The drag coefficient was correlated using the energy-minimization multi-scale (EMMS) approach to reasonably calculate the gas–solid interaction. Six representative cases with different relative time step values were chosen to simulate a micro-fluidized bed of Type-A FCC powders. The results showed that DEM employing EMMS-based drag force was able to greatly enlarge the suitable range of relative time steps in a fast fluidization simulation of Type-A powders. In addition, the typical macro flow structures of fast fluidization was successfully captured: axially dilute in the top and dense in the bottom, and radially dilute in the core and dense near the wall. Moreover, the distinct gas–solid backmixing, which is considered one of the most important pieces of evidence for the determination of fast fluidization regimes, was modeled. It was indicated that the EMMS-based drag model attenuated the overestimated drag force so that the soft-sphere contact model would be able to more appropriately deal with particle collision, and thus improve the suitable relative DEM time step range.
In this paper, the two-dimensional Kelvin–Helmholtz (KH) instability occurring in the shear flow of polymer fluids is modeled by the dissipative particle dynamics (DPD) method at the coarse-grained molecular level. A revised FENE model is proposed to properly describe the polymer chains. In this revised model, the elastic repulsion and tension are both considered between the adjacent beads, the bond length of which is set as one segment’s equilibrium length. The entanglements between polymer chains are described with a bead repulsive potential. The characteristics of such a KH instability in polymer fluid shear flow can be successfully captured in the simulations by the use of the modified FENE model. The numerical results show that the waves and vortexes grow more slowly in the shear flow of the polymer fluids than in the Newtonian fluid case, these vortexes become flat, and the polymer impedes the mixing of fluids and inhibits the generation of turbulence. The effects of the polymer concentration, chain length, and extensibility are also investigated regarding the evolution of KH instability. It is shown that the mixing of two polymer fluids reduces, and the KH instability becomes more suppressed as the polymer concentration increases. The vortexes become much longer with the evolution of the elongated interface as the chain length turns longer. As the extensibility increases, the vortexes become more flattened. Moreover, the roll-up process is significantly suppressed if the polymer has sufficiently high extensibility. These observations show that the polymer and its properties significantly influence the formation and evolution of the coherent structures such as the waves and vortexes in the KH instability progress.
The discrete element method (DEM) coupled with computational dynamics (CFD) has been considered one of the most sensitive ways of studying the micro fluidized bed. This article proposes a so-called particle circumstance-dependent drag model that is dependent on a particle’s complex circumstances. Slugging and non-slugging fast fluidization in a micro fluidized bed is modeled with the use of the CFD-DEM. The results show that the formation and the fragmentation of clusters in a slugging fast fluidized state are clearly captured, and both have time synchronization. However, with the increase in gas velocity, the boundary of the dense and dilute phases turns blurry and the slugs disappear. Furthermore, there exists a relatively serious backmixing of particles in the slugging fast fluidization, while the backmixing effect weakens in the non-slugging fast fluidization. Moreover, the outlet solid flux decreases compared with those in the big fluidized beds for the slugging fast fluidized bed due to the micro size effect, while the micro size effect on the solid flux is not distinct for the non-slugging fast fluidized bed. Last but not least, the radial porosity with slugging exhibits a weakened core-annulus structure compared with the correlated radial porosity in the big fluidized beds. The radial porosity without slugging tends to approach the correlated core-annulus structure.