The crossover of vanadium ions through proton-exchange membranes such as those of Nafion is the chief reason that results in the low energy efficiency and high self-discharge rate of vanadium redox flow batteries (VRB). With respect to applicability, the ideal proton-exchange membrane used in VRB should possess simultaneously high proton conductivity and low vanadium ion permeability. Here, we report a novel approach using a polyelectrolyte layer-by-layer self-assembly technique to fabricate a barrier layer onto the surface of Nafion membrane by alternate adsorption of polycation poly(diallyldimethylammonium chloride) (PDDA) and polyanion poly(sodium styrene sulfonate) (PSS), which can suppress the crossover of vanadium ions. The Nafion–[PDDA-PSS]n membrane (n = the number of multilayers) obtained shows much lower vanadium ion permeability compared with plain Nafion membrane. Accordingly, the VRB with Nafion–[PDDA-PSS]n membrane exhibits a higher coulombic efficiency (CE) and energy efficiency (EE) together with a slower self-discharge rate than that of Nafion system. The highest CE of 97.6% and EE of 83.9% can be achieved at charge–discharge current density of 80 mA cm−2 and 20 mA cm−2, respectively.
A series of novel composite membranes, based on sulfonated poly(ether ether ketone) (SPEEK) with various graphene oxide (GO) loadings, were employed and investigated in vanadium redox flow battery (VRFB) for the first time. The scanning electron microscopy images of the composite membranes revealed the uniform dispersion of GO nanosheets in the polymer matrix due to the interaction between GO and SPEEK, as confirmed by Fourier transform infrared spectra. The mechanical and thermal parameters of the composite membranes increased, while the VO2+ permeability decreased with increasing GO content. Random embedding of GO nanosheets in the membranes can serve as effective barriers to block the transport of vanadium ion, resulting in a significant decrease of vanadium ion permeability. The VRFB assembled with the composite membrane exhibited highly improved cell parameters and strikingly long cycling stability compared with commercial Nafion 117 membrane. With the protection of porous PTFE substrate, the pore-filling SPEEK/GO composite membrane based on VRFB ran for 1200 cycles with relatively low capacity decline.
In this work, CeO2 nanoparticle decorated graphite felts (CeO2/GFs) were prepared by a facile precipitation method. The corresponding CeO2/GF composites containing different contents of CeO2, i.e. 0.1, 0.2, 0.3, 0.5 wt% were synthesized individually as electrodes for vanadium redox flow battery (VRFB) application. Scanning electron microscopy and X-ray diffraction analysis indicated the homogeneous dispersion of CeO2 nanoparticles on GF. The cyclic voltammetry results revealed that the CeO2/GFs exhibited higher activity and better reversibility towards the VO2+/VO2+ redox reaction compared with the pristine GF. Among all the electrodes, 0.2 wt% CeO2/GF demonstrated the best electrochemical properties, thus nominating CeO2 content of 0.2 wt% as an optimum content. The VRFB single cell tests indicated that 0.2 wt% CeO2/GF showed the highest energy efficiency of 64.7% at the current density of 200 mA cm−2, which was significantly higher than that of the pristine GF (53.9%). Furthermore, the cycle life test of a VRFB single cell demonstrated the outstanding stability of the CeO2/GFs electrode.
28 January 2016 in ACS Applied Materials & Interfaces
A very simple and promising method to design the anode catalyst architecture for direct alcohol fuel cells by physically mixing Pt/C catalyst with transition-metal oxide nanoparticles is presented and electrochemical measurements confirm that this unique catalyst structure has excellent activity toward alcohol and CO electro-oxidation.