Resin-based materials have been prevalent for dental restorations over the past few decades and have been widely used for a variety of direct and indirect procedures. Typically, resin-based dental materials are required to be flowable or moldable before setting and can provide adequate mechanical strength after setting. The setting method may include, but is not limited to, light-curing, self-curing or heating. In this review, based on different indications of resin-based dental materials (e.g., dental filling composite, dental bonding agent, resin luting cement), their rheological and mechanical properties were reviewed. Viscous and flexible properties were focused on for materials before setting, while elastic properties and mechanical strength were focused on for materials after setting. At the same time, the factors that may affect their rheological and mechanical properties were discussed. It is anticipated that the insightful information and prospections of this study will be useful to the future development and fabrication of resin-based dental restorative materials.
Dental resin composites have been widely used in a variety of direct and indirect dental restorations due to their aesthetic properties compared to amalgams and similar metals. Despite the fact that dental resin composites can contribute similar mechanical properties, they are more likely to have microbial accumulations leading to secondary caries. Therefore, the effective and long-lasting antimicrobial properties of dental resin composites are of great significance to their clinical applications. The approaches of ascribing antimicrobial properties to the resin composites may be divided into two types: The filler-type and the resin-type. In this review, the resin-type approaches were highlighted. Focusing on the antimicrobial polymers used in dental resin composites, their chemical structures, mechanical properties, antimicrobial effectiveness, releasing profile, and biocompatibility were included, and challenges, as well as future perspectives, were also discussed.
1 February 2020 in International Journal of Pharmaceutics
Deep eutectic solvents (DESs)—a promising class of alternatives to conventional ionic liquids (ILs) that have freezing points lower than the individual components—are typically formed from two or more components through hydrogen bond interactions. Due to the remarkable advantages of biocompatibility, economical feasibility and environmental hospitality, DESs show great potentials for green production and manufacturing. In terms of the processing of functional composite resins, DESs have been applied for property modifications, recyclability enhancement and functionality endowment. In this review, the applications of DESs in the processing of multiple functional composite resins such as epoxy, phenolic, acrylic, polyester and imprinted resins, are covered. Functional composite resins processed with DESs have attracted much attention of researchers in both academic and industrial communities. The tailored properties of DESs for the design of functional composite resins—as well as the effects of hydrogen bond on the current polymeric systems—are highlighted. In addition to the review of current works, the future perspectives of applying DESs in the processing of functional composite resins are also presented.
Hot-melt pressure-sensitive adhesive (HMPSA) is an environmentally benign adhesive which is typically processed without solvent in industries. However, casting solution method is commonly used for experimental purposes in the lab for convenience. Therefore, seven types of solvent with different polarities, including toluene as the most commonly used solvent, were investigated in this work to study the feasibilities. Quick bond strength and holding power were tested with different types of solvents and different adhesive weight percent in the prepared solutions. Through viscosity measurement, thermal analysis, and compositional analysis, the correlation between the chosen solvents and adhesive performance was further explored. It was found that the differences in the obtained bond strength of HMPSA treated with a variety of solvents were due to physical reasons instead of chemical reactions, and a solvent with similar polarity to toluene (e.g., tetrachloride, octane) should be considered as an option because a similar polymer chain relaxation could be maintained as the original HMPSA without solvent treatment. In this study, the mechanism of choosing toluene as common solvent for HMPSA testing was analyzed, and the feasibility of optional solvents was discussed.