With the increasing consumption of coffee beverages, an increased amount of food waste—spent coffee grounds (SCG)—is generated and disposed into landfills or combusted in incinerators. SCG are characterized as a highly polluting substance with partial toxicity due to the presence of caffeine, tannins, and polyphenols. It also contains 15% of oil on average, and its potential for biodiesel production is thus considerable. The aim of the presented work is to evaluate the possibility and technical potential of biodiesel production from the SCG oil (SCGO) by esterification and transesterification reaction. According to the characterization of the studied SCGO, this stream must be adjusted and purified to be utilized in the existing biodiesel production plant. Fatty acids (FA) represent 85.85% of the SCGO, with two dominant FAs—linoleic and palmitic acids. The necessity of removal and disposal of unsaponifiable matter, which accounts for 15% of the SCGO content, must be highlighted when producing biodiesel from the SCG. The objective of this research was the comparison of different biodiesel production processes, where a two-step transesterification process has been identified as the most successful method for biodiesel production from the SCGO with the highest ester content of 89.62% and the lowest content of unsaponifiable and unidentified matter in the final product. The novelty of the analyses is a characterization of the d unsaponifiable matter present in the SCGO, and the article highlights the importance of progression to be considered when evaluating the technical potential of the SCG biodiesel production integrated into a biorefinery. Nevertheless, the SCG biodiesel can contribute to fulfilling the mandatory share of advanced biofuel in the fuel energy mix given by national legislation and contribution to the circular economy approach of biorefineries.

One of the conventional kraft pulp mills produce crude tall oil which is a mixture of free fatty acids, resin acids, sterols, terpenoid compounds, and many others. This study is devoted to the issue of direct transformation of crude tall oil in a mixture with straight-run atmospheric gas oil to liquid fuels using three different commercial hydrotreating catalysts. Diesel fuel production is an alternative to incineration of these materials. High catalytic activity was achieved for all tested catalysts in temperature range 360–380°C, under 5.5 MPa hydrogen pressure and ratio H₂/feedstock 500–1000 l/l. Crude tall oil can be converted to diesel oil component via simultaneous refining with straight-run atmospheric gas oil on NiMo/Al₂O₃and NiW/Al₂O₃-zeolite catalysts. All tested catalysts had very good hydrodenitrogenation activity and high liquid yield were at tested conditions.